Anyone use this combination with an MFJ 1708 antenna switch. Thoughts? Is there a setup configuration? 73 Bill VA3QB

Hello Any idea why power output is set to 100W, I can measure this on external power meter and a dummy load, BUT the display of IC-7000 shows only 25W? Any idea appreciated. 73! Adi/YO2LIW

Is it possible to connect a outside monitor to a ic 7000 Chris WB8YPO

I was wondering if there is another mike then the one it comes with the unit. What I would like, is one with a up and down channel buttons and a key pad.

K0fni, you may have missed my earlier post that my issue was found to be a loose connection to my power supply. But thanks for the extra info! Paula K7PAX

My Ic-7000 has started powering off when I hit the tune button. I'm using it with an LDG IT-100 autotuner. Any idea why this might be happening? Paula K7PAX

I want to use a 7K to generate a spectrum display on my computer. The spectrum display on the little screen is rudimentary at best so I wonder if anyone has been able to interface the 7K . I see that

HI all…. I’ve been considering getting something together for FT8. I’ve a 7000 here on the desk that hasn’t been powered on since 2008 -literally. I recently purchased the SignaLink USB with the inten

Has anyone tried using a Yaesu FL7000 amp. with a IC7000 ?

My name is Jim Walker My call is KBØX I just purchased a used IC-7000 and would like to find out how to go about modifying the radio to connect an external video monitory to it. Thanks, Jim

I'd like to be a member if' I'm not already one............was at the yahoo. groups place. Thanks, Craig, N6BWJ ccclifton@...

W3 8900015210 CBL OPC-1448A (P0.5, N28, L60) Main board to PA W4 8900015210 CBL OPC-1448A (P0.5, N28, L60) Main board to PA W5 8900015220 CBL OPC-1461A (P0.5, N30, L40) Main board to DDS W6 8900015220

I have been working on my second IC-7000 from the scrap pile with the Click - Click no power problem. My problem is that the main board has been out so many times that the ribbon cable from the main b

Does the 7000 require any firmware updates? Checked Icom website but did not see any info. Tnx, 73 K0CRI

Hi all I’m new to this group so please for give me on this post. In gone thru the manual and can not find how to get this radio to scane at 5 MHz insted of the 10mhz. So if some one out there can tell

Hello Fellow 7K-ers, Page 135 of the manual there is a diagram of an external keypad that activates the contents of voice memories. Saw this: https://www.sotabeams.co.uk/contestconsole-switching-unit-

Looking to replace my trusty IC-7000 with a DC-to-Daylight rig with digital in it. Before going the eBay or eHam route, wanted to offer it to the group. I'm the original, non-smoking owner. Rig has sp

When using the Icom 7000 with the Icom RS-BA1 software, will the software work with the 7000 to send the CW messages programmed with the software. That is, does the RS-BA1 work with the Icom 7000 to c

Hi i am Mike and i am a Amateur radio operator. I had to move in to a apartment building and I tried my HT yaesu ft-60 and then I was told not to do it I know I can do it with in my rights but I have

This thread is screwy from the start. Not normal vernacular from a ham. My 2 cents. 73- W1JCW John From: ic7000@groups.io [mailto:ic7000@groups.io] On Behalf Of D C *Mac* Macdonald Sent: Wednesday, Se