Hi, All, I'm still looking for a nice MFJ-706 or MFJ-7000 here in the UK (overseas deals would probably not be effective because of the weight). I wrote the original review in PW and was talked into s

greetings from Vienna, I am trying to program the transceiver for 2m and 70cm usage using Chirp. The PC (Windows XP) is connected via USB to the CI-V remote control jack, using a cable purchased from

Hi guys I’m looking for IC-7000’s control panel; could anyone help me ? Regards Pasquale IW0HEX Inviato da Posta per Windows 10

I have this program, IZ2BKT for the IC-7000. It can save memories plus act as a CAT control for this rig. Details and file found here: https://www.maniaradio.it/en/ic7000bkt.html

hello, For those interrested I am starting on a project to automaticaly control the YEASU ATAS-100/120 HF antenna using an ICOM radio like the IC7000. It will be most likely Arduino based, using CI-V

Is the IC-7000 stable enough for FT8 use on 50, 144, and 432 MHz? Randy, W7HR

Hi, let us review here what are the best settings for working digiral modes with ICOM IC 7000 After some years of trials I ended up in these conclusions: Configuration: West Mountain Radio - PLug&PLay

Hello! Anthony, KN4ROR here from the Volunteer State! Just picked up Technician last year. Working on getting my General. I was able to find 2 clean IC-7000s and I am looking forward to learning more

Good Morning, I currently am trying to set up my Icom 7000 for FT8. My setup is: -PC (Win 10)(WSJT-X) - to Signalink USB - to Icom 7000 via ACC port - to Watt Meter - to 50 ohm Dummy Load -WSJT-X radi

Good Morning, I currently am trying to set up my Icom 7000 for FT8. My setup is: -PC (Win 10)(WSJT-X) - to Signalink USB - to Icom 7000 via ACC port - to Watt Meter - to 50 ohm Dummy Load -WSJT-X radi

Hi. I'm Javier (EA4FSD) from Spain. I'd like to install on my IC7000 a IF buffer amplifier to add it an IF out and use it as panadapter, like a DX Engineering Clifton Laboratories Z10000 (https://www.

This is very early release of the user interface, as a reminder there will be 4 variation of the packaging; 1- with no display and maybe a couple of status LEDs (very Small) 2- 2X16 LCD display 3- 4X2

Does anyone know of a way to get the HRD favorites list transferred to the IC-7000 memory channels? Even if it could export to a CSV file I might be able to use Chirp to load it onto the radio. The id

Suddenly last night my IC-7000 stopped performing effectively on HF. It delivers 35 watts on 440 It delivers 45 watts on 2 meter it delivers between 0 and 13 watts at most on 20, 15, and 6 with errati

Not that I use repeaters much but decided to try my IC-7000 on the local repeater tonight, cannot seem to access it, offset is set correctly, ctcss tone is set correctly but I just cant access it, the

Anyone run this ATU with their 7K, ive got a loaner IC-7000 to take on a trip with a view to buying it, it has an AT-7000 with it but no lead, just ordered the connecting lead from one of the UK stock

hi fellow 7000 owners, anyone have a junker 7000 or parts for a 7000 lurking around? I need the connector board. It’s the gold plated male pin set that is mounted on the body of the 7000 and mates wit

I have a pristine Icom AT-180 automatic antenna tuner that I bought years ago, used it once, and put it aside with my 706 Mk II G in an emergency go kit.and then never used it. I am mainly into QRP ki

I have a pristine Icom AT-180 automatic antenna tuner that I bought years ago, used it once, and put it aside with my 706 Mk II G in an emergency go kit.and then never used it. I am mainly into QRP ki

Hi, All, I'm looking for an MFJ-706 or MFJ-7000 (does anyone know if they are actually the same thing?), deals in the UK would probably only be practical due to weight. While posting, I am currently h