Hello All , Is there anyone here that experiments with their audio with a studio mic , pre amp , eq etc, ? I would like to know what you use . Thanks , es 73 VA3GRV Vince

HI, I have one icom ic7000, main board available for sale, all components are intact, price 200usd, payment by PayPal, interested can contact me for more info , 73s

I'm after some clues on a video issue. I have a friend's 7000 that he can not get the video to work on his dash monitor. I connected it to my external monitor which works fine with my 7000, I get a co

I went to turn on my rig the other day and I am unable to change the Freq. It's locked. I have been through the manual and can't find anything on it. Any ideas before I pack it up and send it out? Tnx

I am trying to connect a QRM noise canceler to the unit (using a QRM-180) and I am having trouble getting the PTT relay to switch the noise canceler out of the circuit. I purchased a cable that is con

Hi guys, I need to replace the IC7000 passband relays P/N 6330001721 . Somebody knows where to get it ? Please send me by mail to lu9do@.... Thanks

CAN ANYONE ADVISE WHICH WAY THE TOP MOUNTED INTERNAL FAN BLOWS WHEN ACTIVATED ? DOES IT DRAW OUTSIDE AIR INTO THE TOP THROUGH THE TOP OPENING, OR DRAW HEATED AIR UP AND OUT OF THE CASE? SIMPLE QUESTIO

Looking for an IC-7000 to take on a small DXpedition to ZC4 in a couple of months, preferably in the UK but anywhere considered even in the US, would prefer unmodified and not widebanded Adrian ZC4MK,

I use the IC-7000 for mobile operation. The compact size of the face is excellent and the 160 meter -440 Mhz coverage is needed,. So is there any replacement for the IC-7000 ? I have a TS-480 but the

I am about to send in my IC-7000 in for a repair. The speaker jack needs replacing [rear]. This is the only problem. I am also thinking about having the ON/Off switch replaced , although it works fine

Hi all, I’m wondering if any of you have had issues with antenna close proximity? I run an ic-7300 on HF and have my ic-7000 set up to use mostly on VHF/UHF. My antennas are quite close to each other

Hi all, So, while I was on vacation, my Diamond SG-7900 dual-band antenna fell apart! The whip came off with parts, I'm sure, bouncing on the roadway, while I merrily sped away, totally ignorant! I sp

I have had my 7000 for 11 great years but never tried 2M repeater work. I have confirmed the radio transmits on the input frequency but will not key the repeater. Have triple check parameters ( doesn'

Hi Everybody: Thanks for all your input on this matter. Sherlock Holmes once said: "when you've eliminated all other factors, the one that remains must be the truth" This is the case.here! The battery

Hello My 7000 is used mobile, I hadn't usedthe car in over a week and car battery went flat, when I got in the radio was making a clicking noise, seemed to be from the Spkr. There was no display, and

My IC-7000 was my mobile HF rig for several years and never had any issues. I recently moved it to the shack as a backup rig for HF and to use its VHF/UHF capabilities. In working with it earlier toda

Hi all. I’m trying to setup my 7000 with a RIGblaster PnP. Got the rig control working fine but am having issues with the sound. I’m using an HP G72 laptop running Windows 7 Ultimate 64-bit. Fldigi se

Hudge one on 7000. Test done on UHF 430 MHz, no test done on HF yet. For information, same test done on FT1 and FTM-400 make no overshoot at all on UHF. https://youtu.be/MidCA2EXktA

Hello all, Need some assistance. I just got a Signalink USB for use with my IC-7000, but I am having great difficulty getting it to work. Can anyone give me some advice on how to configure it correctl

Has anyone performed the full transmitter adjustment? I just replaced the HF finals in my 7000. The unit powers up and emits power; so far so good. How much of the Tx adjustment procedure do I need to