My ham radio friends: I have had several of these requests; THIS IS A SCAM!!! I hope Don WEBER is aware of this... FROM QRZ'S PAGE: KA7QQV USA DONALD L WEBER 1730 LINCOLN AVENUE ALAMEDA, CA 94501 USA

Does anyone have experience running the IC7000 , remotely? I read the article in QEX (Nov/Dec 20220) by W3YJ who uses a Raspberry Pie 4, Fldigi/Flrig and NoMachine to operate his IC-7200 ( a much newe

Hi All, After using my 7000 for years Murphy has shown up but in a way that defies my logic. I typically do not use it on 6M. I was testing on 6M and i twas receiving well. Went to transmit (RTTY mode

Hello is any cpu logic for sale ? for 7000 as mine has only lines in the screen and nothing more .The screen panel works perfectly fine tested in other radio . Thank you regards Manos

I have been trying to set up the memory storage layout on my IC7000 for use in base shack. So far I have picked Bank A for my favorite repeaters and, in Bank B I have put in FT8, PSK31 and SKCC freque

Does anyone have a recommendation for a service technician (stateside) to repair the 500M. I am pretty sure that the four Toshiba power transistors have gone to their reward, owing to the operator usi

After much experimentation and troubleshooting, it all boils down to low voltage. When I put the laptop on battery power the CAT control would not work, but it was OK when the laptop was on shore powe

Is it permitted to post a IC-7000 for sale here?

Hello - took my laptop and rig camping and wanted to operate digitally for a day or two. Haven’t used this laptop with the 7000 for a couple of years. When I attempted to set everything up, the CAT wo

I've got a couple of those nearly indestructible ICOM IC-28H and 37A VHF transceivers (146 and 220 MHz, respectively) from the 1980s, and have not been able to find any online fan groups for them. I'm

Only getting about 25 watts out or so on HF, VHF/UHF is fine, full power.....Its NOT the power cord, I've tried a couple different ones, same result, and those cords work fine with my 7300, I had a pr

Purchased a used IC7000 when it is turned on it displays the previous owners call letters. How can i delete this and inter my call letters ?

Using the 7000 with ACLog. Connected data port on rig to laptop with RigRunner. Works great to capture the frequency. How do I connect the rig to the laptop for ACLog to transmit CW please? Thanks!

What are easy (and cheap) way to get radio to laptop control? Also what cable and laptop do I need. Just getting started. Thanks kc2mzw

I recently fixed an IC-7000 with seriously burned driver. Due to lack of the outdated parts from ICOM support, I created the PCB and uploaded the files to github and oshpark, hope this may help who wa

Hey, So a new problem on my 7000 Hf---Ok VHF--OK UHF power ok and working buth a to high level of ALC and...50% power if i puth my mice without modulation!!! problems with the UHF Pa...normaly ir the

Greetings, I'm looking for a source of a CT-39 cable (6 pin mini Din) with DB-9 connector attached for packet and Winlink use. Thanks, Doug VE1ZG

Greetings, what is the best solution for interconnecting IC-7000 to PC when using Direwolf for packet or APRS? Doug VE1ZG

Icom IC-7000 multimode HF + 50, 144, 430 MHz transceiver. Only a couple of hours use in like-new condition. $725 plus shipping. LDG Electronics IT-100 tuner plus cable for IC-7000. Never used. $120 pl

Hi, The main board of IC7000/driver board was sold , PA unit ,DDS unit, CPU(working perfectly checked) ,case ,ribbon cables,cooling fan interested people can contact me ,you can use as spares for othe