Good morning....new to the group. I have a 7000 and run mobile, and after getting the radio set for my (new) local repeaters, all seemed to work normal (Rptr Tone only). All of a sudden, the radio see

As noted I have my IC7000 for sale. I had it mounted in my Ram 3500 and it ran very well there. The set up includes the following: The IC7000 serial #0511665 and control head with Icon HM 151 hand Mic

Ken and all. Scott repaired the radio, and it's on it's way back to me. The problems were related to open/broken circuits with no component replacement necessary. All done in about a week! The radio w

I have had my 7000 for 11 great years but never tried 2M repeater work. I have confirmed the radio transmits on the input frequency but will not key the repeater. Have triple check parameters ( doesn'

I am running WSPR via SignaLink. The instructions are to put the radio’s power setting to 100% and adjust output power via the TX knob. Also, have read that for digital modes, there should be no ALC ;

Group, Has anyone tried to replace the OPC-1443 with an Internet connection; theoretically a remote connection with close to full radio functionality. Interested in throwing this around. The cable wou

Hello all, I was looking to remote the head of my new to me IC7000 when I came across a ham offering. Dmitrii (DM5AL) has a new remote head kit for the IC7000. He calls it the SKT-7000 and it uses a s

Hi Team I have an IC-7000, transmits well with hand mic both FM and SSB. Transmits Tune tone well. When using JS8CALL, audio is not getting onto the signal, I see no power fluctuation on the meter. I’

Looking for a photo of the ML920S/F9D to see if is the same as the ML920S/DN Panasonic battery because i can but it here in Canada for $4.98 .

Greetings all. If the SWR is high what does the 7000 do; eg does it shut down, reduce power what! Thanks for your replies. 73 de Geoff vk3sq

Hi. Looked for any past posts, but didn't find them. Before the problem below developed, all control cables and coax disconnected (due to approaching storms), I have a disconnect area outside the hous

Will the ic777 work on DMR ?

Will a ic7--- work on DMR ?

Ok, so I thought I had a mic issue, no tx when I press the button, grabbed mic from another icom vhf seemed to work fine a few months. Fast forward now, no tx on any mic. Can tune auto tuner fine, so

Hi all, I'm looking for some help with my IC7000. I apologize for being wordy, it's in my nature and I can't help it. I'll provide a little background, in case it's relevant. If not, just skip to the

Hi all, I am Deon ZS6RFI from South Africa. I seem to have a problem to get my AH$ tuner working on my IC7000. Is there any specific tricks to set up the tuner menus and so on I have tried some of the

Hi all, I ran my IC-7000 for field day and rediscovered an old issue (I don’t use it that often but plan to install it in my truck soon). I had the audio keep cutting out on receive on SSB on all band

I recently added a new VHF frequency to the memory. It showed up on the frequency list, but when I went to scan the memory channels, that function was frozen. I took the entry out and tried again, but

Hi Group.. My 7000 has developed a problem,no power out on ssb hf and as soon as mic is keyed alc swings full scale turned down power and mic gain same problem,rig works okonvhf uhf any ideas cause of

I see there are many references in the parts list to C501 and C502 but we need to find the correct one so that we can order the correct value part. The 100 16P could be 100uF / 16 V or 100nF/16 V or10