Just bought an IC7000 and am new to the group. I'll be using it mainly for POTA work, using an 40-10 endfed antenna. Do I need a tuner? If so, and there isn't an AT-180 available, what should I look f

I'm writing this with tears in my eyes and sorry to be a pest...I'm supposed to get an eBay gift card OR Apple everything gift card for a special friend who is a cancer patient, It's her birthday but

Can someone help me program the CW keyer memories, M1-4? I can't make head or tail of the manual. I can't find anything in the files or FAQ. Thanks! Pete K2UPD

Besides Icom, where's the best place to send a sick IC7000 for repair these days? TNX n7mk

Hi all, Apologies if you’ve already seen this post on Facebook. I’ve just mounted my IC7000 using a DM5AL separation kit in my car and was planning on removing the head unit between use, just wonderin

Does anyone have any ideas why transmit will often start, stop momentarily at the very beginning of the transmit period, then continue in WSJT-X? -- Paula K7PAX

The inexpensive D7DDC design ATU-100 100 watt autuners advertized on Ebay and Amazon work great. $73 fully assembled: https://www.ebay.com/itm/134226040446 $30 kit, no enclosure: https://www.ebay.com/

A replacement HM-151 microphone for the Icom IC-7000 and IC-7100 transceiver is expensive https://www.ebay.com/itm/394089362001 A less expensive replacement is a clone of the HM-133 microphone https:/

I need anyone who has successfully interfaced a IC7000 using winlink, the UZ7ho soundmodem and the easy digi usb interface sold on Ebay. I cannot get the PTT to work. Can anyone help?

My IC-7000 has given me ten years of loyal service in my Pathfinder, mostly on SSB., The radio body and the LDG antenna tuner are mounted out of the way back in a storage area in the luggage area near

Anyone using Winlink and Easy Digi USB with the ic-7000. I can't get it to work. I would like to talk to someone or email them on how I should have it hooked up..

Dear Friends, I am a great fan of icom ic7000, after extensive research on cpu failure of icom ic7000 ,if anyone has failed CPU i can fix the cpu even it's processor is failed ,but not burnt at pcb tr

I have not used my IC-7000 for some time. I was thinking of trying to use it as a remote HF rig at some family land a few miles from home. Does anyone know the best way to set up a 7000 to operate rem

Now Allan is going to kill me with this one ;P Wondering if anyone heard anything about a new 100w mobile from ICOM? Lets face it the 706/7000 formfactor was a lot better than the 7100, I would even a

Joe, I am able to set my Keyer type to one of 3 modes: 1. ELEC-KEY 2. BUG-KEY 3. Straight Robie AJ4F yahoo.com@groups.io> wrote:

Is the IC-7000 stable enough for FT8 use on 50, 144, and 432 MHz? Randy, W7HR

I recently purchased a used IC-7000 that did not come with a Mic. I bought a no-name one on Amazon and it had very low audio levels, I can hardly get the ALC to budge unless I drop plosives into the m

Hello guys, as some of you are aware I have a small lab where I work on Ham Radio devices and have been doing a lot of work around CI-V devices and hubs. Well after many months of work, I am introduci

Test message; please forgive. 73, Adam VA7OJ/AB4OJ

Since '03, I'd been using the same antenna for 6 and 2m, a log periodic that was really just a 6m antenna but which worked "OK" on 2. As I'm spending most of my operating time on 6m, I upgraded that a