A replacement HM-151 microphone for the Icom IC-7000 and IC-7100 transceiver is expensive https://www.ebay.com/itm/394089362001 A less expensive replacement is a clone of the HM-133 microphone https:/

I need anyone who has successfully interfaced a IC7000 using winlink, the UZ7ho soundmodem and the easy digi usb interface sold on Ebay. I cannot get the PTT to work. Can anyone help?

My IC-7000 has given me ten years of loyal service in my Pathfinder, mostly on SSB., The radio body and the LDG antenna tuner are mounted out of the way back in a storage area in the luggage area near

Anyone using Winlink and Easy Digi USB with the ic-7000. I can't get it to work. I would like to talk to someone or email them on how I should have it hooked up..

Dear Friends, I am a great fan of icom ic7000, after extensive research on cpu failure of icom ic7000 ,if anyone has failed CPU i can fix the cpu even it's processor is failed ,but not burnt at pcb tr

I have not used my IC-7000 for some time. I was thinking of trying to use it as a remote HF rig at some family land a few miles from home. Does anyone know the best way to set up a 7000 to operate rem

Now Allan is going to kill me with this one ;P Wondering if anyone heard anything about a new 100w mobile from ICOM? Lets face it the 706/7000 formfactor was a lot better than the 7100, I would even a

Joe, I am able to set my Keyer type to one of 3 modes: 1. ELEC-KEY 2. BUG-KEY 3. Straight Robie AJ4F yahoo.com@groups.io> wrote:

Is the IC-7000 stable enough for FT8 use on 50, 144, and 432 MHz? Randy, W7HR

I recently purchased a used IC-7000 that did not come with a Mic. I bought a no-name one on Amazon and it had very low audio levels, I can hardly get the ALC to budge unless I drop plosives into the m

Hello guys, as some of you are aware I have a small lab where I work on Ham Radio devices and have been doing a lot of work around CI-V devices and hubs. Well after many months of work, I am introduci

Test message; please forgive. 73, Adam VA7OJ/AB4OJ

Since '03, I'd been using the same antenna for 6 and 2m, a log periodic that was really just a 6m antenna but which worked "OK" on 2. As I'm spending most of my operating time on 6m, I upgraded that a

I want to control the icom-7000 from a computer using the HamRadioDeluxe software through the CT-17. I don't have a USB CI-V Cat Interface Cable to connect it directly to a computer. When I use CT-17

ic7000 made in japan - B6249k serial 0801640 thanks colin vk3zzs (qrz.com)

Does anybody remember the name/call of the fellow who put these kits together years ago? I had the info several years ago when I bought one of those kits, but can't remember where I stashed it. I thin

Problem solved. I was using wrong cable between monitor and the 7000. The video from the 7000 goes via a simple mono cable (3.5mm output jack) to a yellow RCA male plug which then connects to the yell

When I hook it up, the monitor shows "NO SYNC." Is there something in/on the 7000 I need to do to make it work? It had worked in the past, but maybe I have forgotten something 73 - Mac, K2GKK/5 Since

I am ready to part with my IC-7000 and accessories. I am the original owner. I am posting here to our group before moving on to QRZ and/or eBay. IC-7000, Serial #512337, MARS Mod by Icom Authorized Se

Can you use the IC7000 cable for programing the IC 207 ? Is the IC207 the same as the IC207H ? Does anyone have the computer program for the IC207 you could send to me ? Thanks James NQ7L