I have a new amplifier and need to run <12 watts so will need to reduce my output power on a continuous basis. Is thi sage for the IC7000?

I have received a Signalink USB with the 6Pin to RJ45 cable, a USB to USB cable and a CIV cable. Connecting the first two is easy, but where does the CI-V cable go on the Signalink? There are the foll

How do I use the IC-7000 to key an AL-80B? is there a pre-built cable I can purchase? if so where can I get it? thanks in advance

Hi, can anyone tell me how to get my ic-7000 to key my ameritron al-80b? if there is a pre-built cable for that can someone point me in the right direction to get one? thanks in advance.

Ok guys, here it is the IMK2 Jr, the baby sister of the soon-to-be-released IMK2 that will have added features... The IMK2 is an 8 memories memory keyer for 7610, 7850, and 705, with mute(7850, 7610)/

Have a late production 7K and use this mobile in my truck. Even when I don’t drive this truck often, I fire up the rig often and run it. Now I hear the relay click inside but there is no power up. Any

Hi, all. I'm selling my IC-7000 which has unstable power output on all bands. The HF finals went out on this radio. I decided to take the challenge of replacing them myself. I had no trouble disassemb

I guess we all have to realize, our beloved '7000 radios are getting old (hi hi) and nothing lasts forever. Since Icom has discontinued the radio (sad), they cannot be replaced, so we all do our best

saw your messages and think that cable will address my issues too. The USB side goes to computer, where does the other end connect? Thanks Rick

Hello all. I am new to the group and have an issue with my IC-7000. Specifically, I cannot find a way to route the TX PL tone through the 6-pin mini-DIN Data port in FM mode (I've tried TONE and TSQL

Hi All My ic7000 is not showing anything on the display no frequency etc.It does receive the squelch works and if you are lucky you can sometimes find a frequency that is in use and copy the audio.Thi

Hello all. This is Russ Williams, KW6T. I was first licensed in 1985 and have been active since 2003. I am in Latrobe, California about 15 miles from the current "Caldor" forest fire. The smoke is a r

Does anyone know of a tutorial for the IC-7000? I am specifically looking for a learning course with structured lessons to teach an “old school” ham who is used to operating “boatanchors” how to use t

On my 7000, I have the black background, and the scan bar on the bottom is usually a green bargraph. However, when I use my external RF noise canceller (the internal noise cancelling is turned off) th

Hello, I am in the works of building a mobile setup and I have hit a roadblock, I have a separation cable I got from an estate sale which only has 8 pins, it's not the right cable and the right cable

I want to update the group on the solution to my 7000 intermittent problem. Rather than call it intermittent I should have called it odd behavior that was limited to 6M output. See my original post be

Sent from Mail for Windows I have an intermediate receive. Think it has something to do with the squelch. Haven’t been able to troubleshoot. Can anyone recommend someone who repairs/aligns the 7000? W

My IC-7000 was my mobile HF rig for several years and never had any issues. I recently moved it to the shack as a backup rig for HF and to use its VHF/UHF capabilities. In working with it earlier toda

Amateur radio folks. As I no longer use my IC7000 that I posted for sale I am willing to accept offer for the set up. Any questions will be answered and local pickup preferred. Best 73s Ron. KR1H/5

I have a ic 7000 that is giving me fits. What is happening. When I transmit the radio shuts down. I have even tried it as one radio that is not separated. Any ideas out there would be helpful. I’m jus