It has been a few years since using my rig, but quarantining is making me want to get back to the hobby. I powered up the rig today and I'm having issues with the machine powering off when transmittin

My apologies in advance for a noob question - I don't have access to an elmer. I have been away from my 7000 for a while and am relearning it. I recall with my current setup (MFJ-939 tuner and Cushcra

Hi everyone. I am new to the group and I hope everyone is staying safe.

Here we go gang the units are ready the enclosure now have magnets and we will be ready to ship by next week here are the latest info sorry for the delays its been wild getting the PCBs and hardware i

A local group put a repeater on 6 meters at 50.110+ 127.3 but the input is on 51.410. How do I set this odd split on my IC-7000?

The four metre band here in the UK is undergoing a massive growth of activity. Has anyone successfully modified an IC-7000 to cover that band? 73 es TIA Dave G4CLI

During a ic-7000 repair I found a mysterious circuitry in the PA unit. The board sits on the bottom side of the radio. Inside and invisible it carries the shielded preamp for 2 meters and the preamp F

Somehow in all my switching this past week chasing the VP8, between CW SSB and FT/8, I accidentally added an extra 30 meter screen to the "Band" up and down. That would be OK except when I try to chan

Hi, All, Although I have been ideally looking for an exchange deal on my IC-7200 against an IC-7100, I am not finding any 7100s either at the right price, or close enough in mileage to go and have a l

I have been using Ham Radio Deluxe with my IC-7000 for several years now. HRD has opened up a world of operating pleasure for me. Just about any operating function is a mouse click away and the displa

I am trying to set up N1MM to run RTTY using the MTTY digital engine. I am using a Signalink Interface. Do I keep the rig in USB mode like I do for other digital programs, such as HRD for PSK31?

Dear All, These are some ICs taken from other parts damaged logical unit of icom ic7000,parts are available in 2 qty of each ,This will be replacement for DSP ics damaged in the logical unit ,conditio

I have a few surplus flat cables on Ebay Item 153810076642 In case you need them. OE8UWW

Hi, All, I'm still looking for a nice MFJ-706 or MFJ-7000 here in the UK (overseas deals would probably not be effective because of the weight). I wrote the original review in PW and was talked into s

greetings from Vienna, I am trying to program the transceiver for 2m and 70cm usage using Chirp. The PC (Windows XP) is connected via USB to the CI-V remote control jack, using a cable purchased from

Hi guys I’m looking for IC-7000’s control panel; could anyone help me ? Regards Pasquale IW0HEX Inviato da Posta per Windows 10

I have this program, IZ2BKT for the IC-7000. It can save memories plus act as a CAT control for this rig. Details and file found here: https://www.maniaradio.it/en/ic7000bkt.html

hello, For those interrested I am starting on a project to automaticaly control the YEASU ATAS-100/120 HF antenna using an ICOM radio like the IC7000. It will be most likely Arduino based, using CI-V

Is the IC-7000 stable enough for FT8 use on 50, 144, and 432 MHz? Randy, W7HR

Hi, let us review here what are the best settings for working digiral modes with ICOM IC 7000 After some years of trials I ended up in these conclusions: Configuration: West Mountain Radio - PLug&PLay