I am repairing a radio for a friend. The driver board is burnt to a crisp the fet is literally welded to the heat sink. I'm aware that the board is no longer available. I am tempted to fabricate one f

Hello to all, I designed a pair of rails for my IC-7000 which can be either 3d printed or cut out of metal using a CNC. I have uploaded the desing to thingiverse here:https://www.thingiverse.com/thing

NOW YOU HAVE DONE IT!!! Posted something that I am interested in with no link or directions on how to find them. NOW I am forced to GOOGLE!!!!! Power? SWR range?? Just when I was getting past project

Paul, I sent you a private message (I think) regarding the OPC-1443 plug dimensions. I can't figure out this forum software to determine if you received it or not?

OK, well after many months working at everything, a big piece of the puzzle is now online. www.ve2dx.com ( http://www.ve2dx.com/ ) our new web site is live. you will find information on our project, h

try <https://www.maniaradio.it/en/ic7000bkt.html> https://www.maniaradio.it/en/ic7000bkt.html it is superb and free logoPARRAconsultores Ing. Juan Carlos Parra Chacabuco 2312 (B1636AZF) OLIVOS Prov. d

Hi guys When driver board has gone faulty with PD55015 burned, in your opion, is it possible to put an RD15HVF1 ? What do you thing about that ? Thanks Pasquale IW0HEX Inviato da Posta per Windows 10

Working on new small device it is a very simple breakout box the IAB1 for the ICOM AUX1 8pin or 13pin connector on the back of the ICOM Radios to get acces to Fix 100mv Audio from the radio, input aud

Ok, 3D printer back online and plenty of parts came in so the CT-17Bs (Icom CI-V hubs) and IAB1 (Icom Breakout Boxes are available for shipment again this week. https://www.youtube.com/watch?v=YkKvKKs

https://www.youtube.com/watch?v=3FWcMfHGcwQ Well still working on the IMK keypads family of products, looks like the first products to come out will be the IMK2 for highend ICOM radios with Keypad jac

Hi I want to bring my IC7000 in operation for FT8. but need some guide : What is needed of HW for correct setup What is recommended Power Out to use with IC7000 on FT8 Do you have any other alternativ

Hello to all, I have designed a small base for mounting an handheld antenna on the side of my 7000 radio. is is 3d printed and very easy to make. I thouht that might be of interest to some of you here

Good morning, group, Does anyone have a source for a cable for connecting the 7000 to a Coastal Chipworks TNC-X, or the pin-out to build one? Perhaps I am blind as a bat or dumb as a rock, but I can’t

After posting this, things I didn't realized.... 1. My RF power was quite low (3). 2. Laptop audio (SDR station on 14.255) was going out to US Navigator. Can't repeat problem, but I wonder how I'm hea

Hi I’m going to repair an IC-7000 of a very friend of mine. Driver unit is fauly as you can see in attach. Before to fix PD55015, I’m going to seek a new driver unit board, if it’s possible. Could any

Moderator Assuming there is one. Please try to filter out this spam

Hey gang! Juste finish the new design of my Icom CI-V hub, it is a mordern replacement for the original Icom CT-17 with or without USB port. The VE2DX CI-V Hub will let you interface multiple ICOM rad

I just subscribed to the group this evening; my name is Terry Young, call sign n0ve I'm looking for help with a problem. I've had my IC-7000 since 2011 and an AH-4 since 2012. For about the past three

I have a question for the group. A while back I put in a new driver board for the icom 7000. I had just learned about it from another ham. When I got it back, I was testing the radio on 10 m. I have i

It has been a few years since using my rig, but quarantining is making me want to get back to the hobby. I powered up the rig today and I'm having issues with the machine powering off when transmittin