Date
1 - 5 of 5
PTT outlet and CI-V control
|
Michael Parker
Can the CI-V control outlet on the rear be used as a PTT outlet to control a MFJ-1708 SDR switch?
|
|
|
|
Could you use the send signal from the radio that would key a linear to control the SDR switch?
It might work quicker than the C-IV. |
|
|
|
Michael Parker
Where is the port for the send signal to the linear on the rear of the IC7000?
|
|
|
|
If I remember correctly it is on one of the DIN plugs ACCY 13 pin plug pin 3 (HF)(Page 12 of your manual) . Page 21 of your manual shows the hook up to a non-ICOM linear amp. You may need an external relay. If switching logic level you should be OK.
|
|
|
|
Pin 3 of the ACC Socket (13 pin DIN). From: "Michael Parker" <miketparker@...> To: ic7000@groups.io Sent: Wednesday, November 30, 2022 2:27:46 PM Subject: Re: [ic7000] PTT outlet and CI-V control Where is the port for the send signal to the linear on the rear of the IC7000?
|
|
|