Date
1 - 8 of 8
IC7000 remote socket
|
Tony Levitt
Am using the 7000 for FT8 and using the accessory socket to interface to the pc via a commercial interface lead (am not using CI-V) everything works on all the HF bands including 50Mhz
no problems but the ptt is not working on VHF/UHF have checked all the menu setting but can't find an option to enable/disable on VHF/UHF
|
|
|
|
Robin Williams
I think you have to use the 6 pin socket to get ptt on vhf/uhf Cheers. Robin zl3rew
On Sat, 16 Feb 2019 01:49 <g4efxmobile@... wrote: Am using the 7000 for FT8 and using the accessory socket to interface to the pc via a commercial interface lead (am not using CI-V) everything works on all the HF bands including 50Mhz
|
|
|
|
Branko <9a2mw.branko@...>
Hello,
Connect pin 7 and pin3 for PTT function on VHF and UHF! VY 73 9a2mw - Branko pet, 15. velj 2019. u 13:49 <g4efxmobile@...> napisao je:
Am using the 7000 for FT8 and using the accessory socket to interface to the pc via a commercial interface lead (am not using CI-V) everything works on all the HF bands including 50Mhz
|
|
|
|
Tony Levitt
Thanks Robin I will have to make a new lead and give it a try. Tony G4EFX
On 15/02/2019 20:02, Robin Williams
wrote:
|
|
|
|
Tony Levitt
Thanks Branko that's fixed the problem! Best 73's Tony G4EFX
On 15/02/2019 14:31, Branko wrote:
|
|
|
|
Branko <9a2mw.branko@...>
Hello, Maybe I was not precise enough. I use ACC 13 pin DIN socket . For VHF and UHV band need to connect pin 3 and pin 7 for PTT . Pin 3 is for operation up to 50 MHz and pin 7 is for 2m and 70cm work. Pin 3 and pin 7 need to be connected !!! 73! 9a2mw
sub, 16. velj 2019. u 09:11 Tony Levitt <g4efxmobile@...> napisao je:
|
|
|
|
Tony Levitt
Hi, I understand now pin 3 must be for HF linear operation and 3+7 for VHF/UHF. I have used CI-V and the ptt works on HF 2+70 but have a comms problem it fails after a few operations saying that it can not read the frequency so I abandoned that approach. 73s G4EFX
On 16/02/2019 09:31, Branko wrote:
|
|
|
|
Tony Levitt
Hi, With info from AB1DD I have connected pins 3+7 together using menu item 20 and all works fine now. Thanks for your help again Tony G4EFX
On 16/02/2019 09:31, Branko wrote:
|
|
|
