Date
1 - 4 of 4
Microphone
|
Ahmad Eddie Mobasheri
Hi all,
My question: is it OK detach the mic from the front , and while connected by the separation cable to the unit, be on receive mode? Thanks *********************** A. Eddie Mobasheri 46 Bollard Avenue New Windsor 0600 Auckland, NZ Ph: +64 0212 (Persia) 737 742 Email: aemobasheri@... ************************************** -- Eddie Mobasheri Auckland, New Zealand ZL1AEM
|
|
|
|
Mystic Treg
Yes
On Wed, Mar 13, 2019, 21:02 Ahmad Eddie Mobasheri <aemobasheri@...> wrote:
|
|
|
|
As far as I can tell from the schematics there is no problem with the mike in either position on no mike at all.
That would apply to receive or transmit as there are digital communications modes that do not require the mike for operation
|
|
|
|
Joe
I think this question might originate from CB radio days where the mike had to be plugged in for the radio to work? I seem to remember some AM CB sets that required the mike to be plugged in because the PTT switch not only keyed the radio but did some fancy switching of the audio circuit. The same circuit was used for the receive loudspeaker and the transmit AM modulation.
Anyone else remember those days? Or am I having yet another day of cranium flatulence? 73, Joe, k1ike
|
|
|