[IC-7000] IC700 and PRO7 IC headset RFI on my rig
|
Perry Ogletree K4PWO <k4pwo@...>
If you have the head remoted be sure you have the small screw that attaches the control cable to the main unit in place! Loss of that ground point will cause lots of RFI issues.
Perry K4PWO From: ic7000@... [mailto:ic7000@...] Sent: Thursday, November 24, 2016 12:32 AM To: yahoogroups <ic7000@...> Subject: [IC-7000] IC700 and PRO7 IC headset RFI on my rig Hi, I have RFI on my rig screen when I transmit using the Heil PRO7 IC Headset and Microphone. However, when I tried the headset/microphone on my mates IC7000 rig no such problem exists. Using a ICOM AH4 ATU , antenna is delta loop cut for 40m , coax feed and 4.1 balun at the apex fed point of the delta. No separation cable in use as it is a operated as a base station. Grounding to water pipe system of house. I tried a loop of coax with ferrite on the rear of the rig. I have tried ferrites on the leads of the headset. Grounded to rear of rig and AH4 ATU. I would love to hear from you with any solutions how to stop the RFI in my IC7000 rig 73 Colin VK2JCC
|
|
|
|
Colin Christie
No thats not the case.
toggle quoted messageShow quoted text
|
|
|
|
Colin Christie
Perry, the head is not remote. Operated As a base station. 73 Colin
From: "'Perry Ogletree K4PWO' k4pwo@... [ic7000]" To: ic7000@... Sent: Friday, 25 November 2016, 8:46 Subject: RE: [IC-7000] IC700 and PRO7 IC headset RFI on my rig If you have the head remoted be sure you have the small screw that attaches the control cable to the main unit in place! Loss of that ground point will cause lots of RFI issues.
Perry K4PWO From: ic7000@... [mailto:ic7000@...] Sent: Thursday, November 24, 2016 12:32 AM To: yahoogroups Subject: [IC-7000] IC700 and PRO7 IC headset RFI on my rig Hi, I have RFI on my rig screen when I transmit using the Heil PRO7 IC Headset and Microphone. However, when I tried the headset/microphone on my mates IC7000 rig no such problem exists. Using a ICOM AH4 ATU , antenna is delta loop cut for 40m , coax feed and 4.1 balun at the apex fed point of the delta. No separation cable in use as it is a operated as a base station. Grounding to water pipe system of house. I tried a loop of coax with ferrite on the rear of the rig. I have tried ferrites on the leads of the headset. Grounded to rear of rig and AH4 ATU. I would love to hear from you with any solutions how to stop the RFI in my IC7000 rig 73 Colin VK2JCC [Non-text portions of this message have been removed]
|
|
|