[IC-7000] Re: IC-7000 don´t want to switch on
Ivan Silva <ivan@...>
I advise to follow all the way from 12 v up to the control unit. I've fixed
two IC7000 that have had same problems in the metalizing of the holes on
the printed circuit board where the thread passes from one side to the other
From: ic7000@... [mailto:ic7000@...] On Behalf Of
Sent: sábado, 19 de janeiro de 2013 22:59
Subject: [IC-7000] Re: IC-7000 don´t want to switch on
I had that problem once after I moved the radio. It was due to the fact that
the face plate was loose, must have hit the release when I moved the radio.
Reseated it and the radio was fine after that.
--- In ic7000@... <mailto:ic7000%40yahoogroups.com> , "dajetzi"
[Non-text portions of this message have been removed]
Hi all,toggle quoted messageShow quoted text
Many thanks for your great info. My friend has tryed to clean the display contacts but this haven´t fixed the problem, so he´ll take the TRX to me for an internal check.
Thanks a lot es 73
EA1RJ - Ricardo
--- In ic7000@..., "Ivan Silva" wrote: