The the mic cable (continuity). Sent via the Samsung Galaxy S10, an AT&T 5G Evolution smartphone

Yes, I used several of Scott's loggers for contesting. They are all the same, I can help you. Do you have a CI-V cable? Steven WA8Y Sent via the Samsung Galaxy S10, an AT&T 5G Evolution smartphone

Can you test with different coax? If not, at least do a visual inspection of the shield to PL-259 connection at each end. lf the shield has come lose, or the connection is oxidized, that could cause y

Separated control head is the way to go mobile. The radio runs cooler. I place mine in the center console, heat sink up, with mic plugged in the back of the radio instead of at the control head. Steve

I use a MFJ battery booster, the fuse holders seem to be the biggest issue. Mine is about your vintage and I've used it a lot without any other problems.

This morning I paired my Bose Bluetooth headset with the Avantree Priva III "low latency" (40mS) transmitter. I can hear my rig just fine but latency is added my Bose headset, its a no go for CW (I de

Ok, tonight I set up the Avantree HT3187 "Low Latency" Bluetooth TX (and RX that came with it). It was easy to pair the two and right away I started hearing FT8 signals from my radio. So I switched to

Thanks for the tip. I lost my day to a couple of other projects. I received the new Low Latency Bluetooth transmitter and receiver for my RadioSport RS60 Deluxe Dream Edition headset. With latency und

OK thanks, I order a TX+RX I'll give'm a try. Steven WA8Y

https://www.amazon.com/dp/B01EHSX28M/ref=cm_sw_r_cp_apa_i_BFIxFbEXENQVD Tried BT again. This one was recommended in my Flex group. Too much latency for CW. I'm returning it. Steven WA8Y

I used a Predator generator from Harbor Freight. It is the power inverter type, no hash. https://www.amazon.com/review/R33DGU73H70VO?ref_=d6k_applink_bb_dls Look for one with FCC 15 certification . I

The CI-V interface is used the share band data with the logger. You need a COM port interface between USB and CW key jack. I have this setup. If you need more help I here. Steve WA8Y Sent via the Sams

Yes, I first used DXLab with an IC-718. It became a software controlled radio. I then bought the Ic-7000 (which I still own). I bought it for a mobile but it was so much better for CW and contesting (

There is a button for Split operation. Steven WA8Y

You can get the same experience with a fantastic FREE suite of programs. Just Google DXLab Suite. Here is a Link https://www.dxlabsuite.com/ Under the Tab "Getting Started" is a great "Video Introduct

Of course it works. I used the data port (not the Accessory port) on the IC-7000. And SignaLink sold me a DIP programming plug (I have one for another rig also). Latest firmware updates are free at th

Here is a link to one made specifically for the IC-7000. https://www.gigaparts.com/arb-704i2.html?gclid=Cj0KCQiApbzhBRDKARIsAIvZue-o3kiDHzzX4_GBrLToL6oC21nk9CsFiRpZPOQ7e7NOn0YhlHuVI88aAuBeEALw_wcB

Yes, works very well. But I buffer the TX/RX switching. I use an Amertron AR-704 TX/RX switch. Steve WA8Y

$800 -900 for a clean like new one.

Headphone would be less amplitude. I use audio from the data port to a signaLink USB.