Hi Al, I install Anderson Powerpole connectors on any 12VDC connector that comes into my possession. So, I reseated the Powerpole connectors at the back of my radio that goes to my power source. That

J.D., Yeap, I'm still here, just outside working the problem. The counterpoise is in the antenna manufacturer's recommended range of 50' to 55'. Can you explain in more detail what you mean by the AH-

Hi Howard, Thanks for the suggestion about going into a dummy load. The fuses are good and I think you are on the right track that the power problem was a voltage drop. I re-seated the power connectio

Ron, Yes, I was looking at the individual responses and working the problem. I have resolved the power issue and I'm still working the tuner issue. Thanks, Terry, n0ve

Hi J.D., In my experience, you are correct about the AH-4 or the 7000 not maintaining the tuned settings once the 7000 is powered off and the AH-4 gets its power from the 7000 so it powers off as well

Hi Ron, Yes, there is a loading coil on the EMCOMM II. Yes, I am using the EMCOMM II and the AH-4 together (at the same time). And, yes, you got it correct, after transmitting resulted in the power cy

Hi Prabhu, Thanks for the reply. The power off/power on cycle was due to a poor DC connection. What threw me was that the 7000 worked during two nets and all I did was plug it back into power with no

Hi Marnus, Thanks for the reply. The power off/power on cycle was due to a poor DC connection. What threw me was that the 7000 worked during two nets. I replace the power connectors with Anderson Powe

Hi Dennis, Thanks for the reply; you were spot on. The power off/power on cycle was due to a poor DC connection. What threw me was that the 7000 worked during two nets. I replace the power connectors

I just subscribed to the group this evening; my name is Terry Young, call sign n0ve I'm looking for help with a problem. I've had my IC-7000 since 2011 and an AH-4 since 2012. For about the past three