Good evening, I would rather think the SWR circuit is correct But then there is an intermittent cut. Check the transmitter output socket first and solder on the PCB. Best regards, Ludovic - F5PBG http

This is not the driver in question, it is common to HF and V / UHF. To prevent this failure, do not use more than 30W in FM or numerical mode (FT8, etc) like all the 100W tranceivers. Best regards, Lu

If it is the driver, then no HF and no VHF too. But it is not the question... 73's de Ludovic - F5PBG http://radioamateur.forumsactifs.com/f36-ic-7000

Chirp is not very fine with IC7000. I prefer this free software : https://www.maniaradio.it/en/ic7000bkten_download.html Best regards, Ludovic - F5PBG http://radioamateur.forumsactifs.com

Hum... Prefer iron box... Best regards, Ludovic - F5PBG

I do not like transmission and reception of this tranceiver (same than FT897). In addition, this is only an 16 bit DSP. I prefer the FT991 in the almost same format with a better selectivity (better t

Only for the CAT, not the audio, of course.

I found it on eBay. http://radioamateur.forumsactifs.com/t1694-ic7000-interface-bluetooth-de-telecommande It works with HRD and Chirp. keywords : bluetooth ic7000 (Less than 14 €) Best regards, Ludovi

Personally, with the new equipments which exists, i would not buy an IC7000 more than 450 $. Best regards, Ludovic - F5PBG.

#all

Hello, you can use an external screen like : http://radioamateur.forumsactifs.com/t1454-video-externe-convertisseur-video-pour-ecran-externe-ic7000 or http://radioamateur.forumsactifs.com/t2019-ic7000

False, there is a soldering battery inside.

Hello, AH-4 need a command wire. To answer to the question, i prefer a wellknow Smartuner SG230. Much expansive but better quality. I use mine for 20 years like you can see on qrz.com. (long wire befo

Here my articles on IC7000 : http://radioamateur.forumsactifs.com/f36-ic-7000 and on FT450 : http://radioamateur.forumsactifs.com/t1884-ft450-yaesu-avis Use google translate. . You will not use more t

Have you some pictures ? Best regards, Ludovic - F5PBG

No, you must read again and follow the link inside the page : http://inforadio.free.fr/icom/IC-7000_panne_Tx_f5dqk.pdf Best regards. Ludovic - F5PBG.

You can repair it. It is probably the driver. It is a little card which is sell by ICOM (40 - 80 € i suppose). You can buy directly the transistor but it is more hard to change it : Search PD55015 ver

Possible... With "KF Givrant" for example, you could freeze the MOSFET in order to see what append. Best regards, Ludovic - F5PBG

Same problem here : Transistor 20-30 € If you do the repair, it will be fine to have some pictures. I will send documentation via link in private message (135 Mo) in some minutes. Best regards, Ludovi

Failure of PA MOSFET UHF i suppose. Best regards, Ludovic - F5PBG.

I use the freeware version of HRD 5.24 / 38 : http://radioamateur.forumsactifs.com/t1527-hrd-versions-gratuites-de-ham-radio-deluxe-restent-disponibles-en-telechargement and this little bluetooth inte