Transistors have been sold, thanks

I have a matched pair of RD70HHf1 transistors for the HF final of the IC-7000, bouhgt new from RF PArts. New, never used, no longer available, 75.00 for the pair, shipped to a US address......

Is it permitted to post a IC-7000 for sale here?

The good thing about these new rigs is everything is menu driven..... The bad thing about these new rigs is everything is menu driven !!!

well, got the final verdict on my 7000.....Matt from SAR in Michigan called today, turns out it was NOT the finals NOR the driver board.....apparently a diode that biases the finals went bad, Matt sai

On TX, I get almost 7 volts on 1 final.....less than half a volt on the other.....looks like that area got very hot at one time....should there be heat sink compound between the metal plate on top of

Only getting about 25 watts out or so on HF, VHF/UHF is fine, full power.....Its NOT the power cord, I've tried a couple different ones, same result, and those cords work fine with my 7300, I had a pr

I've been using an it100 but..,,also damaged my rig three times !!!! Last years field day was the first id used it since the last repair and after 6 hrs or so, used on cw and/or rtty, it crapped out a

My IC-7000 crapped out, again, at Field day last year, no , or low power on HF, (don’t think it’s the fuse problem, as the power cord is not fused, connects to a rigrunner)...second time it happened.

Whats a IC-7000 selling for these days?

More than likely the driver board….. its under the pa board and not visible unless you pull the pa board…. mines blown twice now, apparently an issue when using non resonant antenna….sarts , I think t

Look for Matt in Michigan, by far the best Icom shop out there….. its under SAR or SARTS, something like that .….if google can't find him, look in eham under the review section for repair services Sen

The stock mic is not a dtmf mic, need to order one…… Sent from my Windows tablet From: John Kramer jkramer@... [ic7000] Sent: ‎Tuesday‎, ‎December‎ ‎6‎, ‎2016 ‎4‎:‎49‎ ‎PM To: John Kramer jkra

I have one, used hard for SO2R rtty contests, and used at least three times in VP9 land for rtty contests, and while it gets “warm” I’ve never had a problem with it overheating.... > On 4/9/2016 9:55:

R and L Electronics advertising them now for 1499.99...... > On 3/1/2016 4:37:40 PM, Jim jcrisco@... [ic7000] (ic7000@...) wrote: > > hi all... > a little off subject... > ic 7300 is n

it connects in memory mode for me also, but how do you change the memories from within HRD? I cant find the channel/memory selector button.... > On 2/1/2016 9:12:29 PM, David Leonhardt david_leonhardt

Is it possible to use the 7000 with HRD in memory mode? Trying to setup for a remote operation, and would like to change thru the 2m repeater channels I have programmed into the radio, but cant figure

Not sure what I did, but I have no audio from the built in speaker....if I plug a external speaker into the headphone jack works ok.....any idea what went wrong?

Thats exactly what I did.....and havent regretted it..... > On 3/23/2015 9:14:26 PM, Kent Hufford khufford@... [ic7000] (ic7000@...) wrote: > > Sell your 7000 for $800+. And buy

Matt’s worked on 2 different Icoms for me, and always been prompt, fixes it right at at good price, with good communications..... > On 2/15/2015 4:26:18 PM, ac2mt@... [ic7000] (ic7000@yahoogro