On my 7000, I have the black background, and the scan bar on the bottom is usually a green bargraph. However, when I use my external RF noise canceller (the internal noise cancelling is turned off) th

This is what I do with my 7000: For the 6 settings that are individual, I use them for the repeaters near me For each band that I use – 14 MHz, 18 MHz & 29 MHz, 7 MHz, 3 MHz I take the 99 entries and

73 – K4CQO Bob Hoffmann

Is there a way to get the remaining life of the battery? If it also holds the memory settings, I would hate to lose all of my memory settings – and it would be nice to replace the battery before that

OK, I have to eat crow here, but wanted to saw how tolerant the IC7000 is and how well the MAT-TUNER mat-180H works. I do have the HF and VHF antennas labeled -- including the connectors and the coax,

Hi Richard, I currently have a noise canceller connected to the 13 pin connector. I was looking into a cable that breaks the connector in 2 for any future connections on the 7000. Your break-out box s

Finally got it to work! I saw in the manual that there was a 16 pin connector that was provided with the ic-7000 and wanted to look to see if I could use it to replace the one that I had in case the w

Thanks for responding Rich. However, what I am seeing is -- if on 2m & 70cm receive, the relay -- presumable from having voltage applied -- shows not connected. This is whether I am transmitting or no

I am trying to connect a QRM noise canceler to the unit (using a QRM-180) and I am having trouble getting the PTT relay to switch the noise canceler out of the circuit. I purchased a cable that is con

Has anyone tried one of the composite video to HDMI converters? They are pretty cheap, and there are a lot more video displays that will accept HDMI inputs.

There are 2 ways to change the scanning -- just pushing the SCN wen it is showing, and also holding it down for a second -- and then you will get the ability to select the scan steps you want. I have