Hi Jioe, I appreciate the diligence but this wasn’t my message. 73 Kurt KD6LZV

#all

I would guess voltage drop on fuses commom issue or connection to 12 volt power supply. Don Weber Ka7qqv Ka7qqv@...

#all

Kurt, Don’t forget your “call sign”! 73, Joe AB8ZK

#all

The correct position for the SWR/PWR Meter is between the Radio and the Tuner for it to work properly. 73 Van WD6FGB

#all

I think he is saying that the radio shows hot when it is first turned on and not transmitting. You are correct that if it were operated at 100 watts for long on Digital it will be plenty hot. If the s

#all

"100W on FT8" HI Kurt, I'm not surprised the radio shows "hot" when running a full-duty cycle for 15 seconds at a time. Have you tried cutting back the power of FT8 (maybe 40w) and seeing if the tempe

#all

Try it without the tuner plugged in. Radio direct to the dummy load. Carl AB1DD

#all

Somehow the long answer I made failed to make it. On the PA board there are thermistors that read the temp. I think that they are R734 and R736 The hottest is directed to the CPU via D705 as the THML

#all

Bonjour, Mes liens sont les suivants: Radio->SWR->tuner->antenne 73 de F6FSC Michel

#all

Hi Carl, My links are as follows; Radio -> antenna tuner -> SWR/PWR meter -> Antenna Nothing else plugged into the tuner. --- Thanks & 73's de VK6KC Kurt Baeten

#all

Thanks Dale, in my case the tuner doesn't seem to make much SWR difference between antenna connected via tuner or direct. I also had RF and also used toroids and ferrites and seemed to fixed that prob

#all

Do you have anything plugged into the rear antenna tuner port? Some devices that are not designed for the 7000 will cause the temp to read high, even though they will work with other Icom radios just

#all

You may have a bad thermistor and that goes to the CPU and that will fold the power back as a function of the ALC and the CPU is what creates the indication on the screen. There are two NTC resistors

#all

I always run two 12volt computer fans behind the 7K particularly on FT8 but I run no more than 50watts output into an inverted vee fan dipole so similar conditions just lower power. I found it wasn't

#all

I bought a 7K (after having been out of the hobby for 30 years) and it’s a great little radio BUT the temp gauge always shows HOT, even after just switching on. also the fan always runs, even after ju

#all

I bought a 7K (after having been out of the hobby for 30 years) and it’s a great little radio BUT the temp gauge always shows HOT, even after just switching on. also the fan always runs, even after ju

#all

Ok, realigned the project to address size smaller and the fact that the control head MUST be remote from the radio, working at making the link wireless. This is my dev plate-forme. 73

#all

Hi, let us review here what are the best settings for working digiral modes with ICOM IC 7000 After some years of trials I ended up in these conclusions: Configuration: West Mountain Radio - PLug&PLay

#all

OK! OK! OK! I got the message will keep you boys in the loop here... 73 Richard VE2DX

#all

I agree, FB will be a killer for most hams I know. Jerry NY2KW

#all