I drive a 1998 Plymouth Neon and had a similar problem as you. I solved by installing a W4RYY battery booster about 3 or 4 years ago. It solved my reboot problem and my distorted TX audio problem and

You bring up an interesting concept. This almost be the reverse of the WWV alignment. If you have MixW or some other soundcard software with a waterfall display, this should be pretty easy. Set the IC

I use mine on several MARS channels nearly every day and works just fine. Regards, N1GBE -------------- Original message from "DONNIE" <ki4txi@...>: -------------- Afternoon everyone in the grou

Had to change the link. See below: <http://www.ralphcelone.somee.com/Driver_v10518.exe> Regards, N1GBE -------------- Original message from ralph.celone@...: -------------- If you have the same on

If you have the same one I do - and I think you do - you can use this driver..... <http://www.ralphcelone.somee.com/PL2303_Prolific_DriverInstaller_v10518.zip> Regards, N1GBE -------------- Original m

Try Radio Shack #42-540..... -------------- Original message from B Johnson <kb7drn@...>: -------------- I was gifted a 7" portable Viore TV for the ManShack. The external video input appears to

I initially build my own based on one of the many circuits available on the web. However, when I wanted a second cable, I bought on of these <http://cgi.ebay.com/USB-Programming-CI-V-interface-cable-f

I initially build my own based on one of the many circuits available on the web. However, when I wanted a second cable, I bought on of these <http://cgi.ebay.com/USB-Programming-CI-V-interface-cable-f

I can't say whether this is normal or not, but, mine does the same thing and I have had for several years. N1GBE -------------- Original message from VE4CY <jwt@...>: -------------- I've had my ri

If you're near a Radio Shack store, they sell the male as Catalog #: 274-224 and the female as Catalog #: 274-234..... Regards, N1GBE -------------- Original message from "Jonathan Kitchen (KI4MTB)" <

IceComm works pretty well for uploading & downloading channel information to/from the 7000. As a matter of fact, I did just that yesterday. The one area where it is somewhat lacking is inserting new i

I've had good luck with this one <http://cgi.ebay.com/USB-CI-V-CAT-interface-for-ICOM-CT-17_W0QQitemZ360185529850QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item53dcbb05fa&_trksid=p3286.c0.m14> that I

I am using the 6-pin mini-din "DATA" port on my 7000 mostly because the 13-pin din "ACC" port will NOT mute the microphone input during transmission where the "DATA" port will..... I have not experien

This might seem like a silly question, but, did you check the fuses? I had that problem once..... Regards, Ralph, N1GBE -------------- Original message from "wx7y" <bmills1@...>: -------------- H