This might seem like a silly question, but, did you check the fuses? I had that problem once..... Regards, Ralph, N1GBE -------------- Original message from "wx7y" <bmills1@...>: -------------- H

I am using the 6-pin mini-din "DATA" port on my 7000 mostly because the 13-pin din "ACC" port will NOT mute the microphone input during transmission where the "DATA" port will..... I have not experien

I've had good luck with this one <http://cgi.ebay.com/USB-CI-V-CAT-interface-for-ICOM-CT-17_W0QQitemZ360185529850QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item53dcbb05fa&_trksid=p3286.c0.m14> that I

IceComm works pretty well for uploading & downloading channel information to/from the 7000. As a matter of fact, I did just that yesterday. The one area where it is somewhat lacking is inserting new i

If you're near a Radio Shack store, they sell the male as Catalog #: 274-224 and the female as Catalog #: 274-234..... Regards, N1GBE -------------- Original message from "Jonathan Kitchen (KI4MTB)" <

I can't say whether this is normal or not, but, mine does the same thing and I have had for several years. N1GBE -------------- Original message from VE4CY <jwt@...>: -------------- I've had my ri

I initially build my own based on one of the many circuits available on the web. However, when I wanted a second cable, I bought on of these <http://cgi.ebay.com/USB-Programming-CI-V-interface-cable-f

I initially build my own based on one of the many circuits available on the web. However, when I wanted a second cable, I bought on of these <http://cgi.ebay.com/USB-Programming-CI-V-interface-cable-f

Try Radio Shack #42-540..... -------------- Original message from B Johnson <kb7drn@...>: -------------- I was gifted a 7" portable Viore TV for the ManShack. The external video input appears to

If you have the same one I do - and I think you do - you can use this driver..... <http://www.ralphcelone.somee.com/PL2303_Prolific_DriverInstaller_v10518.zip> Regards, N1GBE -------------- Original m

Had to change the link. See below: <http://www.ralphcelone.somee.com/Driver_v10518.exe> Regards, N1GBE -------------- Original message from ralph.celone@...: -------------- If you have the same on

I use mine on several MARS channels nearly every day and works just fine. Regards, N1GBE -------------- Original message from "DONNIE" <ki4txi@...>: -------------- Afternoon everyone in the grou

You bring up an interesting concept. This almost be the reverse of the WWV alignment. If you have MixW or some other soundcard software with a waterfall display, this should be pretty easy. Set the IC

I drive a 1998 Plymouth Neon and had a similar problem as you. I solved by installing a W4RYY battery booster about 3 or 4 years ago. It solved my reboot problem and my distorted TX audio problem and

I should also mention that I have 2 pair of number 10 wires running directly from the battery to the back of the car where the radio, battery booster, and antenna coupler are mounted either in, or on,

Go to Radio Shack and buy some DeoxIT - Catalog # 64-4338. Disassemble the mic and spray some into the actual PTT switch. I had the same problem and did this to mine about 3 years ago & it's been OK e

I also had the intermittent PTT issue about 3 or 4 years ago. As someone said before, the switch is not sealed. I was able to clean the contacts with DeoxIT from Radio Shack & it's been fine ever sinc

You would most likely be successful feeding the mic audio into Pin 1, but, Pin 4 (and Pin 5) are constant output levels - no response to volume control level setting. Regards, Ralph, N1GBE ___________

I've been using the W4RRY battery booster with the 7000 for about 5 years now and it works great - I have never had an issue with it. The only downside is that I think they are no longer being produce

Nobody ever answered the original question about using two mics at the same time. If you plug two mics into the IC7000, when you press the PTT on either one, both mics will be hot and the radio will T