Suddenly last night my IC-7000 stopped performing effectively on HF. It delivers 35 watts on 440 It delivers 45 watts on 2 meter it delivers between 0 and 13 watts at most on 20, 15, and 6 with

Kevin Thanks for the info I will look into it, no I was not aware of this change... 73 Happy new year Richard VE2DX

You are aware that Icom changed the frequency format when their radios addressed frequencies over 1GHz. There's an extra byte (two hex digits) in the newer radios. I've looked at source code for a PIC

I couldn't see a link inline either, but I went to YouTube and searched on his call. This appears to be it: https://www.youtube.com/watch?v=Pxo5KUfbVTE I hope this posts!

Cant see a link ?

here is a picture of the lcd prototype

here is the demo for the unit Click on the link bellow; VE2DX ICOM ATAS-100/120 Controller Demo 1 73 Richard VE2DX

This is very early release of the user interface, as a reminder there will be 4 variation of the packaging; 1- with no display and maybe a couple of status LEDs (very Small) 2- 2X16 LCD display 3-

Unlike most screwdriver or tarheal antenna, the ATAS100 or 120 as two major difference. 1- controlled voltage is 8vdc for down and 12vdc for up, and is sent to motor via the coax. 2- atas type antenna

I am not familiar with the ATAS-100 antenna. Is it a version of a "screwdriver" antenna? If so, the TurboTuner-2 should work just fine with the IC-7000. I just bought one to use with my IC-706 Mk

ACE ! -- Sent from my Android phone with mail.com Mail. Please excuse my brevity.

Ok here is an update at this point; - established Ci-v hardware interface - ci-v code done - testing dual speed to help fine tune tuning. - lcd 2x16 and 4x20 working hid done - color tft display

Me too. It seems to have always been common to dismiss these antennas as ineffectual, but I always had good results with mine. As ever, proper grounding is the key! Bob, G8IYK. Need to define a

I look forward to seeing the results. I have a Atas100 collecting dust as well. 73 Bill VA3QB

one of my other projects is the external 8 memory keypad for the ICOM 7300. see more info at

hello, For those interrested I am starting on a project to automaticaly control the YEASU ATAS-100/120 HF antenna using an ICOM radio like the IC7000. It will be most likely Arduino based, using CI-V

Sorry for the late reply now that you seem to have the repeater keying up. But it might help you in the future. Jim

Three questions: Have you put a watt meter in line with the radio and measured the TX output power and antenna SWR? Second question, have you tried using another radio and see if you can hit the

Great news! Glad you got that settled!

hmm. Stupid question, since I’m sure you’ve tried this - but are you able to reach other repeaters? When I was having a similar problem none of my repeated access worked, and I ended up putting