Joe, I am able to set my Keyer type to one of 3 modes: 1. ELEC-KEY 2. BUG-KEY 3. Straight Robie AJ4F

432 - NO.

have the same problem. M0JFG

Bonjour, Sur mon ic7000 dès années 2000 l'ALC a toujours été faible avec le micro HM-151. Je l'ai remplacé par un micro amplifié sm8 et sm20, gain réglé à 50%, ALC fonctionne bien. 73's

Agreed. Consider checking voltage at the mic plug (carefully). Should be +8 volts. See attachment. Russ On Tuesday,

Does it have low audio on FM and AM? Have you listened to it? How much power are you putting out on SSB? ALC might not tell the whole story about audio. Try a reset in case some settings have been

I don't know what mike you are using, but Icom, especially the older ones, need a high output to function correctly. Most are electret amplified and have + voltage on the mike lead to provide the

I run min with 5db Compression mic gain around 30%

I recently purchased a used IC-7000 that did not come with a Mic. I bought a no-name one on Amazon and it had very low audio levels, I can hardly get the ALC to budge unless I drop plosives into the

Bit more relevant in newer radios with bandscope to free up screen of the radio.. -- 73 Richard VE2DX, Jesus Island, PQ-014 VE2DX ELECTRONIC WWW.VE2DX.COM Only the Best ICOM, ERC and HRD

Jadief, yes, and I need a beta tester for 9100 please send me email, can't give it away but will give you more than fair price to beta test it, fix any issues and refund if not working... ve2dx at

But, actually, no need for it. IC-7k displays all the information i need, never had problems with it Greetings de Jonas, DJ4WIL

Without looking back in this thread, is the IC-9100 included in what the NEW ICOM METER will work with? John Diefenbach, K1TLV/4 Port Charlotte, FL Sent with Proton

The 7K has only a forward power detector circuit for VHF/UHF -- no reverse power detector. So it has no SWR checking. It relies on the SWR foldback built into the PA FETS, which I'm not sure is a

We are still beta testing before final release will look carefully into that on this and other radios like 746pro, etc... -- 73 Richard VE2DX, Jesus Island, PQ-014 VE2DX ELECTRONIC

My understanding was that it still had a swr checker but didn’t display it. It limits transmit power when high swr is found on VHF and UHF correct? -- Seth - KD0TEL

The IC-7000 doesn't have an SWR detector for 2m, 70 cm bands, so a meter that only reads ci-v data from the radio won't display VHF/UHF SWR, only HF. Steve, W3AHL

still doing beta tests, need to find a 7000, let recheck some of the ci-v commands to verify... I will add this to 7000, 746, 9700, etc... -- 73 Richard VE2DX, Jesus Island, PQ-014 VE2DX ELECTRONIC

Affraid not Larry, the 756ProII is missing a couple of important CI-V commands that really was hurting us when trying to included them, we went as far as we could looking into 30 different ICOM radios

That's excellent! Does it show SWR when transmitting on 2 meter / 70 cm from an IC7000?