Hi, Check the C-IV address at the IC7K and also at the HRD. If the receiver us working try to change the add to the IC7K and write the receiver's one. Regards

Test message; please forgive. 73, Adam VA7OJ/AB4OJ

Not only the Prolific might not work - it PROBABLY will not work! So many counterfeit chips out there and the Windows drivers really do care. Get a known FTDI (?) cable. I can't tell you how many

The one thing I see that MIGHT be a problem is the Prolific USB to Serial Adapter. FTDI adapters are much more compatible. Prolific adapters are known to be problematic but if it is working with one

When I hook it up, the monitor shows "NO SYNC." Is there something in/on the 7000 I need to do to make it work? It had worked in the past, but maybe I have forgotten something 73 - Mac, K2GKK/5

https://www.ebay.co.uk/itm/314056349551 is all I use and the resolution is good enough for that size using the simple lead from the 7000. Not heard of the 'sharper' kit though - the 7000 already puts

Hello Greg Thank you for your reply. I have already done everything you said. no result. I got the result when I connected the old Icom R20 I have according to the scheme below. I am running the Icom

I would be glad to have it and appreciate you being so generous. You can contact me at Fred@....

https://elkantennas.com/ LPDAs -- K1FZY (WA4TPW) SK 9/29/37-4/13/15

You can also look at my CT17B products, at WWW.VE2DX.COM they are not outdated from the 1970`s like the ICOM CT17 :P -- 73 Richard VE2DX, Jesus Island, PQ-014 VE2DX ELECTRONIC WWW.VE2DX.COM Only

Thanks, Charles. I know the Arrow antennas. I've seen them at hamfests for years, but Elk antennas don't ring a bell. I'll go look. 73, Bob -- W4ATM - 35 Miles south of the Kennedy Space

Do you have the CT-17 connected to the Computer through the DB25 on the back? You also have to power the CT-17 with 12 volts. Typically you’ll use a DB25 to DB9 serial adapter to connect to a DB9

FWIW -- Elk antennas and Arrow antennas are both used heavily by 2m/70cm satellite stations. The Arrows are cross-polarized Yagis. The Elks aren't Yagis, but they have several dB of gain over a

I want to control the icom-7000 from a computer using the HamRadioDeluxe software through the CT-17. I don't have a USB CI-V Cat Interface Cable to connect it directly to a computer. When I use CT-17

I have a small TV that I used when I had my IC-7000. It currently needs a battery. If you are interested you can have it for the price of whatever USPS Priority box cost it takes. If interested I can

I think the TV might be made by Haier. I searched for the model number and found the battery on Amazon a couple of years ago. I don’t remember the model of the battery. Having said that, I have

Does anybody remember the name/call of the fellow who put these kits together years ago? I had the info several years ago when I bought one of those kits, but can't remember where I stashed it. I

Been on HF since 1976 and still am. Gathering my last couple of cards for 8BDXCC. The only band I haven't operated on from 1.8 to 1300 MHz has been the 60m allocation. -- W4ATM - 35 Miles south of

Time to become a real ham and get on HF. On Thursday, July 7, 2022 at 11:25:03 AM PDT, montanaaardvark

Since '03, I'd been using the same antenna for 6 and 2m, a log periodic that was really just a 6m antenna but which worked "OK" on 2. As I'm spending most of my operating time on 6m, I upgraded that