Hello - took my laptop and rig camping and wanted to operate digitally for a day or two. Haven’t used this laptop with the 7000 for a couple of years. When I attempted to set everything up, the CAT

I've got a couple of those nearly indestructible ICOM IC-28H and 37A VHF transceivers (146 and 220 MHz, respectively) from the 1980s, and have not been able to find any online fan groups for them. 

Has anyone found a good replacement for the stock fuse holders? I am thinking of replacing the stock holders but would like to avoid a weak/ ugly wire to wire

Possible only if you connect your radio negative lead to the battery negative terminal, which is bad installation practice.  Which I guess is one reason to keep the fuse, to protect people from

Not so fast! It is prudent to fuse both sides of the power cord. Just make sure the contact points are clean. Use a Dremel wire brush and then apply some DeOxit to retard future

Do NOT, repeat, do NOT remove the ground leg fuse in a mobile installation. A lost vehicle ground can cause attempting to start the vehicle to use your expensive radio to become the ground path

Usually only one fuse is sufficient, remove the ground wire fuse. w

I have personally experienced this, after discovering 30 watts output on hf on a used rig I bought. I was not happy, but amazed to discover warmth around the fuse holders and adjacent power cable. I

The good thing about these new rigs is everything is menu driven..... The bad thing about these new rigs is everything is menu driven !!!

Please excuse my ignorance , i figured it out with your help . Now to enter HF nets and repeaters . I,m 78 years old and handy caped . This is my first menued driven rig . I replaced a

Get the book…. http://icom.custhelp.com/app/answers/detail/a_id/507/kw/ic7000

73 – K4CQO Bob Hoffmann From: ic7000@groups.io <ic7000@groups.io> On Behalf OfLeRoy Prosic Sent: Saturday, March 27, 2021 5:47 PM To: ic7000@groups.io Subject: [ic7000] when turned on

Purchased a used IC7000 when it is turned on it displays the previous owners call letters. How can i delete this and inter my call letters ?

Can you give details on connecting through Rigrunner? I thought RR was just power distribution. What cables do I need? I'm just interested un using ACLog, not transmitting CW. Thanks, Ron W2PLK

When I was a maintenance manager I also used Tiger Direct to buy a lot of computer equipment. Good prices and good service back a few years ago. -- J.D. Barron

I have found some good deals on refurbished computers, laptops and desktops, at TigerDirectB2B, tigerdirect.com. All of the computers that my Wife and I use are from Tiger Direct. I get their E-Mail

Thanks, I have been looking for a laptop right now. Sent from my Galaxy Tab® A

Yes. USB to CIV converter - many on ebay. This will provide rig control and TR switching. Setup your software PTT control via CAT. < $25 13 pin DIN to 3.5 mm audio cable - available from Hamdaptor,

What are easy (and cheap) way to get radio to laptop control? Also what cable and laptop do I need. Just getting started. Thanks kc2mzw

Great job !!! Thanks for sharing. 73s Pasquale IW0HEX Inviato da Posta per Windows 10 Da: sgub@... Inviato: sabato 13 marzo 2021 19:42 A: ic7000@groups.io Oggetto: [ic7000] Share my driver