Why not ordering a new part instead? I think it is easier and safer to install a new part than to find out the pin assignment of the transformer. Maybe this pics could help.

This worked prior to me taking out the pa board but the connection to earth on the driver was dirty it would don60 watt and jump to 100 cleaned it up but this came off and it did look a bit heat

It appears that board has been subjected to lots of serious abuse. n7mk

The transformer is not necessarily defekt, it was unsoldered by his repair work possibly. The service manual contains exact pictures of the printed boards in color. The circuit diagram will help to

It would appear to me that there are many "smoked" components on that board. Putting the loose item back in will not likely repair any problem! 73 de Mac, K2GKK/5 Since 30 Nov 1953 Oklahoma City,

This componant has fallen off the board can anyone help show me the connections as I have new established where it goes but no idea how it connects From underside of pa board l201 is printed right

+1 to Paul's suggestion: . . . the contacts between faceplace and main body are often a cause of trouble, . . . whether you're using an extension cable, or not. Also, if the rig mis-behaves at high

Hi Paul, I have now done a little bit of thinking about this! There are certainly Blue Tooth adaptors around that can be preset for RX or TX but not both. And there are Blue Tooth adaptors that

RF getting into the radio could cause this. The "digital" audio from the sound card doesn't seem to bother the radio much, but the RS-232 / USB can cause problems. A few turns through a ferrite core

Hi Leroy, Thabks for ypur advise will try to add extra coax parallel to the antenna coax. Just finding the cause of the flickering where my handmi is fixed directly to the front panel. When I try to

Jhun, Sounds like RF is getting into your radio. Try adding 10 feet (or 3 meters) of coax in series with your antenna coax into the 7000, to see if the radio behaves differently. You may need a balun

Hi Paul, split is off during tx on 40m it jumps to another band and will not go back. Also I notice during tx specifically 40m the screen flickers. The rest of the band seems ok. Cheers, Jhun

Sounds like RF in the shack.

I have a JVL Bluetooth headset waiting! I dont wont to go via a PC. 73, Chris Muir ZL2XG

Hi guys, I am wondering when I transmit from one band the radio jumps to other band, especially on 80 and 40m. But when I go to 20m and 15m everything is ok and no automatic switching of band. Thanks

Since someone wanted a picture of the driver and I remembered that I take pictures of almost all the repairs I make I have a blow up of the driver transistor for the IC7000 and thought I would post it

Will you two take your dummy spit somewhere else, email privately each other and go for it, leaving our forum alone for more mature matters. Thank you, Geoff VK3ZGW

Good luck with trying to get someone to help you at this point.

Paul, Having been a ham since 1963 and never a CB'er of course I resent your aspersions as well as your rudeness. 73 has a meaning that escapes you, evidently. I have owned 3 IC-7000s and bought each

Not the least of which is any differences in inner layers.  Often the bottom layer and areas of the top layer are chassis ground or groundplane and may not change at all or very little across