Excellent Chuck 👍👍👍

Helmut: The two diodes D551 and D552 on the PA board are used for the "ATT" function, which is used to attenuate the incoming VHF signal (the other option on the preamp select button). When those

During a ic-7000 repair I found a mysterious circuitry in the PA unit. The board sits on the bottom side of the radio. Inside and invisible it carries the shielded preamp for 2 meters and the preamp

whil all kind of pictures don't show compat chars for the IC7000 -- the control files are there and with an interface you can control the radio without issues. you need to interface the sound as

Hey gang! Juste finish the new design of my Icom CI-V hub, it is a mordern replacement for the original Icom CT-17 with or without USB port. The VE2DX CI-V Hub will let you interface multiple ICOM

Hi Bill ! Glad I could help you... There is also a "more easier" way... It is not necessary to tune from the "unwanted" frequency so many MHz up. You will have the same result when you select the

Hi, George, DXCC Receivedcolumn show the application received between Mar.01 to Mar.10, so your requestis forthcoming. I also sent my QSLs to Germany, to DK7YY, so I am also waiting.

The final story for me on this is...while I could not remove it, Othmar's first post about tuning out of the band and then hitting up or down moves the unwanted channel. So I went to the 10.753

Chuck...not Scott hi...sorry. Bill

Thanks Scott...yes to the first part you said(2 paragraphs). The second part will take some time to digest. Thank you and Ill try those tips. Bill

Bill: I had a chance to play with the radio a bit. I could not exactly replicate your issue, but I may have found a scenario that might make you think it's doing something like what you

10.753.40 is the frequency it keeps going to. It is in the VFOA and "Memo". It appears on the List as well. I don't know but must have saved it to memory somewhere along the way. I have not been able

OK Othmar and others. I moved the extra band to the 5 MHz position successfully...but hitting band up the extra band appears again between 30 and 20. Going back down the 5mhz band is gone. So that

You're welcome Bill... Hmmm, how to eliminate it...I think the only way is to always remember how this works and if you tune out of an amateur-band, before you change bands, tune back into the

Not that I know of. Thank you, Paul W. Hansen, W6XA Amateur Radio Service 2134 Carthage Road Tucker, GA 30084 (864) 222-3539 office www.amateurradioservice.com

Bill: Wednesdays are my day away from the office, so I'll be home and can play with my IC-7000 for a bit to test this before getting on to other important things. (Cleaning up the shack, for

That worked Othmar...thank you. Now is there a way to eliminate it in the future? Bill

Reset the radio. Thank you, Paul W. Hansen, W6XA Amateur Radio Service 2134 Carthage Road Tucker, GA 30084 (864) 222-3539 office www.amateurradioservice.com

I am not sure which question is being answered since another topic has been introduced. Each time I have tried the instructions given to move the extra band or to change it, it moves but when I go

Hi, All, Although I have been ideally looking for an exchange deal on my IC-7200 against an IC-7100, I am not finding any 7100s either at the right price, or close enough in mileage to go and have a