Does the display show FM-TONE or FM-TSQL? The correct one is FM-TONE for repeaters. Ismail KT6LN

Vern, do you have the tone set to FM-TONE or FM-TSQL? It should say FM-TONE. If that is not it then I have no other idea. 73, Terry

Hello, I am having trouble with my 7000 on 2m. I have the correct tons and offset programmed. I can not bring up 2m repeaters. It seems as though the tone squelch has quit working on 2m. It works

My works fine on the Army MARS frequencies. I did the relatively easy mod myself, but not sure how it may affect the warranty. Curt AAR2XJ NJ

Thanks for the info. 73 Donnie KI4TXI

Richard, Have you checked your current draw at 25% power level? When I built my "travel" go pack using a 18AH battery I found that the draw differential on my IC-7K between 25% and 50% power was

With cuts to the NASA budget we may never get to the moon, never mind Mars. I would wait to see if we get there before you mod your radio :) Sorry couldn't resist Rob Sent by Good Messaging

LOL 73 Donnie KI4TXI

I use mine on several MARS channels nearly every day and works just fine. Regards, N1GBE -------------- Original message from "DONNIE" <ki4txi@...>: --------------

I did the mod to mine. Works fine on AFMARS frequencies. 73 Bob WA2UEH/AFA3VZ

Donnie, I have done the mod in the past. It involves taking out one diode, if I remember right. Very small tip soldering iron, some small solder wick and magnifing head set. On mods.dk, make sure you

Yes, the 7000 works fine on Mars frequencies. Of course, you have to modify it with instructions on the website... www.mods.dk . Click on Icom on the left and then scroll down on the right to

Afternoon everyone in the group. Was wondering if anyone has experience with the 7000 and use on the MARS bands. 73 Donnie KI4TXI

I appreciate the info on battery life... I was thinking that for purely portable operation, 18AH would be fine (caveated with the battery booster) -- I could likely receive for almost 10 hours and

Thanks Bob 73 Donnie KI4TXI

Thanks again for the info. I will have to get someone to do the mod for me due to the way my hands tend to shake at times(injuries in the Navy). I just got through looking at the mods done by Steve

Thanks for the info. Knew that it had to be mod'ed ,was just hoping to find some input from other 7000 users who might have done it to their rigs. 73 Donnie KI4TXI

Hello I have just bought a IC 7000 and is setting it up to work here in Denmark. I is a European model. I have found an instruction to operate 1750 burst on page 67 in the manual, but it seems

Tom: Sorry for a bad text draw. Look in this link: http://www.py5vb.qro.com.br/AT-ACT-ic7000.jpg 73, Villas Em 08/02/2010 01:07, KG3VTomZ@... escreveu:

Yes, but does it have 3 switches accessable through the bottom