There is a fuse on the main body of the radio, behind the head. Did you check that one???? Steve/KC8LQV

Thanks for responding, Yes I have checked to make sure that the power supply and fuses are good in fact I changed it out and still have the same problem. I removed the head and put it back on several

Borrow a spectrum analyzer to see what i s going on with respect to RF being radiated from the car's electronics. No shielded wiring on a vehicle's interconnecting cables is the normal state

This might seem like a silly question, but, did you check the fuses? I had that problem once..... Regards, Ralph, N1GBE -------------- Original message from "wx7y" <bmills1@...>:

In my experience, it's better to use the keyboard male-female extension cables; those I found - cheap - were screened, had all pins cabled , and had an extra wire not connected... I just cut away the

Buon Divertimento Andrea ( Have Fun ) with the IC7000 ! Augusto HB9TZA / I2JJR

Change the car, just for a test. FWIW! 73 de Augusto

Did you check the fuse? From: ic7000@... [mailto:ic7000@...] On Behalf Of wx7y Sent: Sunday, August 30, 2009 12:46 AM To: ic7000@... Subject: [IC-7000] My radio

Hello to the group, My radio just went off by it self and wont turn back on, does anyone know how to fix this problem or a good repair facility in the US? Doesn't smell like a component failure, but

I prefer the AH-4. I have used it loops and OCF dipoles fed with and without ladder line from the AH-4 feeds. I have one that I have 75' control cable and Belden 8267. I have 2 of these, and for ops

Dont let them get you down. The 180 is a great tuner. i have it hooked to a 6 meter inverted V, a G5RV, and an Antron 99 via a switch and it tunes everything to less that 1.5. check your

Where did you get the cable that connects the at-180 with the 7000? I have a set w/o this cable. I saw it was almost $100 from ICOM. Thanks

Prefer the AH-4 tuner. DD

I tried this out and it seems to work OK but I have some questions about and been trying to find the wesite. The site that comes up both with google and here in the archives no joy. 73 Larry K1ZW

Turn down your MONITOR LEVEL. That's what fixed it for me (IC7K w/ LDG AT-100 Pro). 73, --Alex / KF4YOR

Ice Comm 1.0 For programming the ICOM IC-7000 Radio. This is the first public release of this program, so bear with me if there are any glitches! Features: -Programming of 5 banks, plus scan edges,

Fred, I'm guessing your G5RV has a SWR of > 3:1 The AT-180 won't cut it. Just the facts. Tim

Is it possible that the coax between the 7000 and tuner is bad? A high SWR at the rig could indicate a bad connection between the tuner and rig. Just a thought... -- 73 de NW7US, Tomas David Hood

Get rid of the 180 and get an SGC Tuner. Icom's Tuners leave alot to be desired.. My Opinion of Course! Terry D.Gillard "NX7R" Gillard Construction Inc. Las Vegas, Nevada O- 702 565-0199 F- 702

hi fred are you using the correct socket for hf on the radio dave browne 2e0dmb