Date   

MTTY config for IC-7000

Paula K7PAX
 

I am trying to set up N1MM to run RTTY using the MTTY digital engine. I am using a Signalink Interface. Do I keep the rig in USB mode like I do for other digital programs, such as HRD for PSK31?


DSP ICs of Logical Unit Available

Prabhu
 

Dear All,
These are some ICs taken from other parts damaged logical unit of icom ic7000,parts are available in 2 qty of each ,This will be replacement for DSP ics damaged in the logical unit ,condition as is basis ,This will be also be a standby for the Icom IC7000 CPU,
IC2201/IC301 ADSP-BF532SBBC400-4qty
IC1226     S1D13706F00A-2qty
IC1302       HD64F2377VFQ33V-2qty

price 50USD for each unit with shipping ,

regards



Re: Flat cable ribbon set

Bill M
 

Guess they're gone...
W2CQ


Flat cable ribbon set

Helmut Wabnig
 

I have a few surplus flat cables on Ebay
Item
153810076642



In case you need them.
OE8UWW


Wanted: MFJ-760 or MFJ-7000 Emcomm

bobsayers2000 <bobsayers2000@...>
 

Hi, All,

I'm still looking for a nice MFJ-706 or MFJ-7000 here in the UK (overseas deals would probably not be effective because of the weight). I wrote the original review in PW and was talked into selling mine, and have regretted it ever since!

If you want to part with an IC-706 Mk2G or IC-7000 at the same time I would certainly consider buying, but would want to do a deal against my IC-7200. Various other ham / military / marine radio items could be included in any deal.

Best regards,


Bob


Re: Chirp and ICOM7000

Romain Kieffer
 

Thanks.  One more thing to try;  I was thinking of hanging headset on the cable to hear whether there are any signals coming through the cable,too.

Take care
 rom

On Feb 13, 2020, at 10:36 PM, Ken Campbell <n6pcd1@...> wrote:

If you are indeed using the CI-V port on he radio, you should probably go into the menu and UNLINK USB FROM REMOTE. Your now have two separate line of communication with the radio, using the USB as well as a COM port.


Re: looking control panel

Geoff
 

You could connect the 7000's video o/p using a switch to the reversing camera input to the vehicle display. The switch would also put a 'dummy' reverse signal to the display unit. I did this for my caravan rear camera. 

I have my 7000's video running through an aux input to my vehicle GPS. Works great as a head up display whilst driving.

Geoff


On Fri, 14 Feb. 2020, 08:36 Bob Luman via Groups.Io, <bobw4mpq=aol.com@groups.io> wrote:
Don't forget about video out on the back if you are using the 7000 as a base unit.
Bob


-----Original Message-----
From: Ron Peak <ron.w5rrp@...>
To: ic7000 <ic7000@groups.io>
Sent: Thu, Feb 13, 2020 11:09 am
Subject: Re: [ic7000] looking control panel

Gosh, I have 2 IC7000 and 1 IC706, and my primary rig is an IC7300.  None are for sale, though I am always open to offers.  The 706 has the cord that goes between the controls and the body of the unit.  Like I said, I’m open to offers (on the 706 and both 7000s)

Hope you find a solution to your problems.  

Vy 73,
Ron W5RRP


On Feb 13, 2020, at 6:52 AM, Romain Kieffer <rmk4547@...> wrote:

sorry Pasquale I can’t suggest anything but Icom, or maybe AmAzon  or eBay

Take care
 rom

On Feb 13, 2020, at 6:47 AM, Pasquale S via Groups.Io <iw0hex@...> wrote:



Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

Da: Ron Peak
Inviato: mercoledì 12 febbraio 2020 23:25
A: ic7000@groups.io
Oggetto: Re: [ic7000] looking control panel

 

Pasquale IW0HEX,

 

How might I help you?  I have an IC7000 in front of me.

 

vy 73,

Ron W5RRP

 

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--

Ron Peak

W5RRP

 

CONFIDENTIALITY NOTICEThe information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

 

<FD3804BE26364629A94B8AFE9F10FB11.png>


looking control panel

Bob Luman
 

Don't forget about video out on the back if you are using the 7000 as a base unit.
Any video monitor or display will work.
Bob




On Feb 13, 2020, at 6:47 AM, Pasquale S via Groups.Io <iw0hex@...> wrote:



Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 


View/Reply Online (#40574) | Reply To Group | Reply To Sender | Mute This Topic | New Topic

_._,_._,_


Re: looking control panel

Bob Luman
 

Don't forget about video out on the back if you are using the 7000 as a base unit.
Bob


-----Original Message-----
From: Ron Peak <ron.w5rrp@...>
To: ic7000 <ic7000@groups.io>
Sent: Thu, Feb 13, 2020 11:09 am
Subject: Re: [ic7000] looking control panel

Gosh, I have 2 IC7000 and 1 IC706, and my primary rig is an IC7300.  None are for sale, though I am always open to offers.  The 706 has the cord that goes between the controls and the body of the unit.  Like I said, I’m open to offers (on the 706 and both 7000s)

Hope you find a solution to your problems.  

Vy 73,
Ron W5RRP


On Feb 13, 2020, at 6:52 AM, Romain Kieffer <rmk4547@...> wrote:

sorry Pasquale I can’t suggest anything but Icom, or maybe AmAzon  or eBay

Take care
 rom

On Feb 13, 2020, at 6:47 AM, Pasquale S via Groups.Io <iw0hex@...> wrote:



Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

Da: Ron Peak
Inviato: mercoledì 12 febbraio 2020 23:25
A: ic7000@groups.io
Oggetto: Re: [ic7000] looking control panel

 

Pasquale IW0HEX,

 

How might I help you?  I have an IC7000 in front of me.

 

vy 73,

Ron W5RRP

 

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--

Ron Peak

W5RRP

 

CONFIDENTIALITY NOTICEThe information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

 

<FD3804BE26364629A94B8AFE9F10FB11.png>


Re: Chirp and ICOM7000

Ken Campbell
 

If you are indeed using the CI-V port on he radio, you should probably go into the menu and UNLINK USB FROM REMOTE. Your now have two separate line of communication with the radio, using the USB as well as a COM port.


Re: looking control panel

w0web <w0web@...>
 

I have a USED IC-7000, I know the display is fine and this radio may work, it does receive on all bands and acts like it wants to work.
This is a radio ONLY, no mic, no power cable or mounting brackets.

Will to sale it for $400.00 usd 
You pay for shipping & insurance outside of the USA



Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 Sport


-------- Original message --------
From: Ron Peak <ron.w5rrp@...>
Date: 2/13/20 09:08 (GMT-08:00)
To: ic7000@groups.io
Subject: Re: [ic7000] looking control panel

Gosh, I have 2 IC7000 and 1 IC706, and my primary rig is an IC7300.  None are for sale, though I am always open to offers.  The 706 has the cord that goes between the controls and the body of the unit.  Like I said, I’m open to offers (on the 706 and both 7000s)

Hope you find a solution to your problems.  

Vy 73,
Ron W5RRP


On Feb 13, 2020, at 6:52 AM, Romain Kieffer <rmk4547@...> wrote:

sorry Pasquale I can’t suggest anything but Icom, or maybe AmAzon  or eBay

Take care
 rom

On Feb 13, 2020, at 6:47 AM, Pasquale S via Groups.Io <iw0hex@...> wrote:



Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

Da: Ron Peak
Inviato: mercoledì 12 febbraio 2020 23:25
A: ic7000@groups.io
Oggetto: Re: [ic7000] looking control panel

 

Pasquale IW0HEX,

 

How might I help you?  I have an IC7000 in front of me.

 

vy 73,

Ron W5RRP

 

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--

Ron Peak

W5RRP

 

CONFIDENTIALITY NOTICEThe information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

 

<FD3804BE26364629A94B8AFE9F10FB11.png>


Re: looking control panel

D C *Mac* Macdonald
 

At one time, you could buy a complete IC-7000 control head from Icom, but that was quite a long time ago.  I believe the cost for it was over $400.  I bought an IC-7000 on eBay several years ago that came with a new head because its original head had a mechanical malfunction.  I repaired the malfunction with less than $5 of replacement parts from Icom and have never used the "spare."  The spare will be retained in case I need a replacement for one of my remaining two IC-7000 rigs.
 
73 de Mac, K2GKK/5​
Since 30 Nov 1953​
Oklahoma City, OK​
USAF, Retired ('61-'81)​
FAA, Retired ('94-'10)



From: ic7000@groups.io <ic7000@groups.io> on behalf of Ron Peak <ron.w5rrp@...>
Sent: Thursday, February 13, 2020 11:08
To: ic7000@groups.io <ic7000@groups.io>
Subject: Re: [ic7000] looking control panel
 
Gosh, I have 2 IC7000 and 1 IC706, and my primary rig is an IC7300.  None are for sale, though I am always open to offers.  The 706 has the cord that goes between the controls and the body of the unit.  Like I said, I’m open to offers (on the 706 and both 7000s)

Hope you find a solution to your problems.  

Vy 73,
Ron W5RRP


On Feb 13, 2020, at 6:52 AM, Romain Kieffer <rmk4547@...> wrote:

sorry Pasquale I can’t suggest anything but Icom, or maybe AmAzon  or eBay

Take care
 rom

On Feb 13, 2020, at 6:47 AM, Pasquale S via Groups.Io <iw0hex@...> wrote:



Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

Da: Ron Peak
Inviato: mercoledì 12 febbraio 2020 23:25
A: ic7000@groups.io
Oggetto: Re: [ic7000] looking control panel

 

Pasquale IW0HEX,

 

How might I help you?  I have an IC7000 in front of me.

 

vy 73,

Ron W5RRP

 

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--

Ron Peak

W5RRP

 

CONFIDENTIALITY NOTICEThe information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

 

<FD3804BE26364629A94B8AFE9F10FB11.png>


Re: looking control panel

Ron Peak
 

Gosh, I have 2 IC7000 and 1 IC706, and my primary rig is an IC7300.  None are for sale, though I am always open to offers.  The 706 has the cord that goes between the controls and the body of the unit.  Like I said, I’m open to offers (on the 706 and both 7000s)

Hope you find a solution to your problems.  

Vy 73,
Ron W5RRP


On Feb 13, 2020, at 6:52 AM, Romain Kieffer <rmk4547@...> wrote:

sorry Pasquale I can’t suggest anything but Icom, or maybe AmAzon  or eBay

Take care
 rom

On Feb 13, 2020, at 6:47 AM, Pasquale S via Groups.Io <iw0hex@...> wrote:



Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

Da: Ron Peak
Inviato: mercoledì 12 febbraio 2020 23:25
A: ic7000@groups.io
Oggetto: Re: [ic7000] looking control panel

 

Pasquale IW0HEX,

 

How might I help you?  I have an IC7000 in front of me.

 

vy 73,

Ron W5RRP

 

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--

Ron Peak

W5RRP

 

CONFIDENTIALITY NOTICEThe information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

 

<FD3804BE26364629A94B8AFE9F10FB11.png>


Re: looking control panel

Prabhu
 

Dear pasqual, 

I have original display for icom ic7000, if you can carry out the replacement surgery I can send across ,attached the pics here, 

73s
Prabhu 

On Thu, Feb 13, 2020, 5:22 PM Romain Kieffer <rmk4547@...> wrote:
sorry Pasquale I can’t suggest anything but Icom, or maybe AmAzon  or eBay

Take care
 rom

On Feb 13, 2020, at 6:47 AM, Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:



Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

Da: Ron Peak
Inviato: mercoledì 12 febbraio 2020 23:25
A: ic7000@groups.io
Oggetto: Re: [ic7000] looking control panel

 

Pasquale IW0HEX,

 

How might I help you?  I have an IC7000 in front of me.

 

vy 73,

Ron W5RRP

 

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--

Ron Peak

W5RRP

 

CONFIDENTIALITY NOTICEThe information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

 

<FD3804BE26364629A94B8AFE9F10FB11.png>


Re: looking control panel

Romain Kieffer
 

sorry Pasquale I can’t suggest anything but Icom, or maybe AmAzon  or eBay

Take care
 rom

On Feb 13, 2020, at 6:47 AM, Pasquale S via Groups.Io <iw0hex@...> wrote:



Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

Da: Ron Peak
Inviato: mercoledì 12 febbraio 2020 23:25
A: ic7000@groups.io
Oggetto: Re: [ic7000] looking control panel

 

Pasquale IW0HEX,

 

How might I help you?  I have an IC7000 in front of me.

 

vy 73,

Ron W5RRP

 

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--

Ron Peak

W5RRP

 

CONFIDENTIALITY NOTICEThe information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

 

<FD3804BE26364629A94B8AFE9F10FB11.png>


Re: looking control panel

Pasquale S
 

Hi Ron

 

I’m looking for a new control panel 😊 to buy

 

My IC-7000 has a display failure.

 

Regards.

 

73s Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

Da: Ron Peak
Inviato: mercoledì 12 febbraio 2020 23:25
A: ic7000@groups.io
Oggetto: Re: [ic7000] looking control panel

 

Pasquale IW0HEX,

 

How might I help you?  I have an IC7000 in front of me.

 

vy 73,

Ron W5RRP

 

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--

Ron Peak

W5RRP

 

CONFIDENTIALITY NOTICEThe information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

 


Re: Another Chirp option

Joe Krout
 

Ftdi is just a different chipset (interface hardware) and driver (software) than prolific. 
Since you're using the Icom cable, it's probably not the issue, but maybe the driver from icom is not supported by your OS, Windows 10? Windows 7 drivers might load, but not run on 10.

There are a lot of 3rd party cables available, that use old copied prolific chipsets, and no longer work with the official drivers. Ftdi chipset cables seem to be Windows 10 friendly though. 

Here's a decent explanation 

Joe KR0UT 



On Wed, Feb 12, 2020, 2:06 PM Romain Kieffer <rmk4547@...> wrote:
Joe, having bought the cable from the local ICOM dealer and received it in an ICOM package I figured that a driver downloaded from the company would be compatible.  
I am at a loss, FTDI does not mean anything to me, is there a reference anywhere I can use to understand it, or better yet a source for it?

 rom

On Feb 12, 2020, at 8:33 PM, Joe Krout <Jkrout@...> wrote:


If your interface cable is trying to use a "prolific" driver, that may be the problem.  There were so many cloned/pirated driver chips in use that Prolific changed their coding.
Your best bet is to find a cable using an "FTDI" interface. 

Joe KR0UT 

On Wed, Feb 12, 2020, 12:56 PM Romain Kieffer <rmk4547@...> wrote:
great minds think alike......    I was looking at the site this afternoon, too.  

Meanwhile I have replaced the device driver for the cable but all my great hopes were dashed pdq.  (Just as a fun aside, I searched the network for the driver, ended up at ICOM Japan, found the driver and got a beautiful pdf file describing what to do, all in Japanese....) 
I still don't have communications with the 7000.  I will call it a night and try again tomorrow. 
 rom

On Wed, Feb 12, 2020 at 5:33 PM Dave Christensen <dkc2030@...> wrote:
I have this program, IZ2BKT for the IC-7000.  It can save memories plus act as a CAT control for this rig.

Details and file found here:  https://www.maniaradio.it/en/ic7000bkt.html






Re: looking control panel

 

What do you need?
I have parts of the control panel for sale on Ebay, but of course it is bad and some parts have been robbed to fix one of my other radios.


Re: looking control panel

Ron Peak
 

Pasquale IW0HEX,

How might I help you?  I have an IC7000 in front of me.

vy 73,
Ron W5RRP

On Wed, Feb 12, 2020 at 5:11 PM Pasquale S via Groups.Io <iw0hex=yahoo.it@groups.io> wrote:

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 



--
Ron Peak
W5RRP
 
CONFIDENTIALITY NOTICE:  The information in this document may be privileged and confidential and protected from disclosure.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.
 


looking control panel

Pasquale S
 

Hi guys

I’m looking for IC-7000’s control panel; could anyone help me ?

Regards

Pasquale IW0HEX

 

 

Inviato da Posta per Windows 10

 

641 - 660 of 41223