Date   

Re: IC7000 FAN QUESTION

James Ray, Sr.
 

I use a Yaesu FTM-400DR Fusion in crossband for nets so I can move around the house with a HT.

I squeezed the heads of small bolts flat in a vise so they would slip into the heatsink fins. Using double nuts I spaced the 1" fan about 3/8" above the fins. I installed the bolts an nuts semi tight and found a position where the bolt spacing would match the fins. I then used super glue on the fins and bolt heads. So far - so good. The radio is cool after an hour of the crossband transmitter running on low power.

Just an idea. Haven't  pulled my 7000 out from under the seat to see how that might work. My voltage booster with the 7000 has a fan that turns on at 125° F and it runs all summer long in Phoenix. It would run the battery dead over a weeks time if I didn't have the power feed switched. (As me how I know?)

73 de KF7SLM, Jim



Sent from my Galaxy Tab A

-------- Original message --------
From: Chris <wb8ypo@...>
Date: 9/7/19 16:54 (GMT-07:00)
To: ic7000@groups.io
Subject: Re: [ic7000] IC7000 FAN QUESTION

What about a fan on the back head sinks. Also how do I attach a fan to it

Chris WB8YPO



On Sat, Sep 7, 2019 at 4:44 PM -0700, "ronharbour47@..." <ronharbour47@...> wrote:

Agreed
Ron KR1H

On Sat, Sep 7, 2019, 4:01 PM Helmut Wabnig <hwabnig@...> wrote:
On Sat, 07 Sep 2019 13:41:09 -0700, you wrote:

>CAN ANYONE ADVISE WHICH WAY THE TOP MOUNTED INTERNAL FAN BLOWS WHEN ACTIVATED ?
>
>DOES IT DRAW OUTSIDE AIR  INTO THE TOP THROUGH THE TOP OPENING, OR DRAW  HEATED AIR UP AND OUT OF THE CASE?
>
>SIMPLE QUESTION  T  I  A   FOR YOUR REPLY.
>
>-
It sucks air in on the top and blows air out to the rear.


OE8UWW




Re: IC7000 FAN QUESTION

Prabhu
 

😂😂


On Sunday, 8 September 2019, Mark Krotz <mkrotz@...> wrote:
>
> It inhales vigorously and blows like a mighty wind.
>
>
> n7mk
>
>
>
>
>
>
>


Re: IC7000 FAN QUESTION

Mark Krotz
 

It inhales vigorously and blows like a mighty wind.


n7mk


Re: IC7000 FAN QUESTION

Chris
 

What about a fan on the back head sinks. Also how do I attach a fan to it

Chris WB8YPO



On Sat, Sep 7, 2019 at 4:44 PM -0700, "ronharbour47@..." <ronharbour47@...> wrote:

Agreed
Ron KR1H

On Sat, Sep 7, 2019, 4:01 PM Helmut Wabnig <hwabnig@...> wrote:
On Sat, 07 Sep 2019 13:41:09 -0700, you wrote:

>CAN ANYONE ADVISE WHICH WAY THE TOP MOUNTED INTERNAL FAN BLOWS WHEN ACTIVATED ?
>
>DOES IT DRAW OUTSIDE AIR  INTO THE TOP THROUGH THE TOP OPENING, OR DRAW  HEATED AIR UP AND OUT OF THE CASE?
>
>SIMPLE QUESTION  T  I  A   FOR YOUR REPLY.
>
>-
It sucks air in on the top and blows air out to the rear.


OE8UWW




Re: IC7000 FAN QUESTION

ronharbour47@gmail.com
 

Agreed
Ron KR1H

On Sat, Sep 7, 2019, 4:01 PM Helmut Wabnig <hwabnig@...> wrote:
On Sat, 07 Sep 2019 13:41:09 -0700, you wrote:

>CAN ANYONE ADVISE WHICH WAY THE TOP MOUNTED INTERNAL FAN BLOWS WHEN ACTIVATED ?
>
>DOES IT DRAW OUTSIDE AIR  INTO THE TOP THROUGH THE TOP OPENING, OR DRAW  HEATED AIR UP AND OUT OF THE CASE?
>
>SIMPLE QUESTION  T  I  A   FOR YOUR REPLY.
>
>-
It sucks air in on the top and blows air out to the rear.


OE8UWW




Re: IC7000 FAN QUESTION

ronharbour47@gmail.com
 

I mounted one blowing into the radio.. Never had a problem. The body was under a rear seat in my truck.


On Sat, Sep 7, 2019, 3:41 PM John Rupprecht K3NOQ <johnk3noq@...> wrote:
CAN ANYONE ADVISE WHICH WAY THE TOP MOUNTED INTERNAL FAN BLOWS WHEN ACTIVATED ?  

DOES IT DRAW OUTSIDE AIR  INTO THE TOP THROUGH THE TOP OPENING, OR DRAW  HEATED AIR UP AND OUT OF THE CASE?

SIMPLE QUESTION  T  I  A   FOR YOUR REPLY. 


Re: IC7000 FAN QUESTION

Steve Draper
 

Mine draws air in through the top and pushes it out the back. 100% factory original, never modified or messed with,

Steve VE7FM

On Sat, Sep 7, 2019 at 1:41 PM John Rupprecht K3NOQ <johnk3noq@...> wrote:
CAN ANYONE ADVISE WHICH WAY THE TOP MOUNTED INTERNAL FAN BLOWS WHEN ACTIVATED ?  

DOES IT DRAW OUTSIDE AIR  INTO THE TOP THROUGH THE TOP OPENING, OR DRAW  HEATED AIR UP AND OUT OF THE CASE?

SIMPLE QUESTION  T  I  A   FOR YOUR REPLY. 


Re: IC7000 FAN QUESTION

 
Edited

All of mine blow out the top and air is drawn in the back across the heat sinks etc and out the top.
I have three of them that do that as far as I can tell.
It hasn't been an issue for me as yet, so  haven't paid that much attention either way to bet money on it.
The cable is shown coming out the bottom of the fan nearest the chassis and the plug should just fit one way.
the proper airflow would be the way it flows with the cable on the bottom of the fan.


Re: IC7000 FAN QUESTION

Helmut Wabnig
 

On Sat, 07 Sep 2019 13:41:09 -0700, you wrote:

CAN ANYONE ADVISE WHICH WAY THE TOP MOUNTED INTERNAL FAN BLOWS WHEN ACTIVATED ?

DOES IT DRAW OUTSIDE AIR  INTO THE TOP THROUGH THE TOP OPENING, OR DRAW  HEATED AIR UP AND OUT OF THE CASE?

SIMPLE QUESTION  T  I  A   FOR YOUR REPLY.

-
It sucks air in on the top and blows air out to the rear.


OE8UWW


IC7000 FAN QUESTION

John Rupprecht K3NOQ
 

CAN ANYONE ADVISE WHICH WAY THE TOP MOUNTED INTERNAL FAN BLOWS WHEN ACTIVATED ?  

DOES IT DRAW OUTSIDE AIR  INTO THE TOP THROUGH THE TOP OPENING, OR DRAW  HEATED AIR UP AND OUT OF THE CASE?

SIMPLE QUESTION  T  I  A   FOR YOUR REPLY. 


Re: Wanted IC-7000 to buy

Simon Thompson
 

$900 us. Icom Canada checked. AT180 tuner and cables. Mic. New power cable. Manual. Original boxes and packing. Plus shipping.

VE7SXS

On Thu, Aug 29, 2019 at 2:08 PM Joe Blazer <blazer12@...> wrote:

How much?

73 AB8ZK Joe

 

From: ic7000@groups.io [mailto:ic7000@groups.io] On Behalf Of Simon Thompson
Sent: Thursday, August 29, 2019 10:55 AM
To: ic7000@groups.io
Subject: Re: [ic7000] Wanted IC-7000 to buy

 

I have one, with the matching Icom tuner, I would be willing to sell.

 

On Thu, Aug 29, 2019 at 3:30 AM Adrian McGonigle <adrian@...> wrote:

Looking for an IC-7000 to take on a small DXpedition to ZC4 in a couple of months, preferably in the UK but anywhere considered even in the US, would prefer unmodified and not widebanded

Adrian ZC4MK, G0KOM


Re: IC-7000 replacement

Mystic Treg
 

I have bought my demonstrated working 7000 with tuners for $650 (two years ago) and $600 (1 year ago).

Check ebay.

Jackie,
on behalf of
Her Imperial Majesty,
Mystic, Kitty


On Mon, Sep 2, 2019 at 11:23 AM w0web <w0web@...> wrote:
Ok the low offer of $350.00 is not happening, I do feel that this radio does work, I know that it works no 2 meters & 70cm,
I don't have a good dummy load to test the H/F tranamitter.
Again I feel this radio does work but is being SOLD AS IS and $450. is as low as I will go




Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 Sport


-------- Original message --------
From: w0web <w0web@...>
Date: 9/1/19 09:18 (GMT-08:00)
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 replacement

I have an IC-7000 that I would be willing to part with.
But first I'm not sure if it works, I know it powers up and I can hear radio traffic but it has NO mic or power cable.
It is just the radio, no acc.

Ships from 94115

Make a reasonable offer.
73 George


Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 Sport


-------- Original message --------
From: Mystic Treg <MysticTreg@...>
Date: 9/1/19 08:08 (GMT-08:00)
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 replacement

I wish there were more IC7000s around, good or to be repaired.  But we all seem to be selfish and only letting loose when they pry them from our cold, dead, hands.  :-(

Jackie,
on behalf of
Her Imperial Majesty,
Mystic, Kitty


On Sat, Aug 31, 2019 at 11:21 AM James Fisher via Groups.Io <cadiscase=yahoo.com@groups.io> wrote:
I use the IC-7000 for mobile operation.
The compact size of the face is excellent and the 160 meter -440 Mhz coverage is needed,.
So is there any replacement for the IC-7000 ?
I have a TS-480 but the face is a bit larger and it does not cover 2 meters and 440.

Thanks
James
Maybe there are enough IC-7000 around that they can always be repaired ?


Re: IC-7000 replacement

k4pwo <k4pwo@...>
 

Looks like it’s only 10 watts out per the pre-release specs.

 

Perry K4PWO

 

From: ic7000@groups.io <ic7000@groups.io> On Behalf Of Phillip Potter
Sent: Monday, September 2, 2019 12:06 AM
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 replacement

 

Icom is getting ready to release the IC-705 and has shown it at the Tokyo Hamfair. You can find pictures online, but the price isn't out yet.

73s Phil, N6OMM

On 9/1/2019 10:58 AM, wb0m wrote:

So is there any replacement for the IC-7000 ?


Re: IC-7000 replacement

k4pwo <k4pwo@...>
 

The TS-480 is not discontinued… it is the TS-2000 that’s no longer made. The TS-480 is HF/6 only anyway.

 

Perry K4PWO

 

From: ic7000@groups.io <ic7000@groups.io> On Behalf Of wb0m
Sent: Sunday, September 1, 2019 12:59 PM
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 replacement

 

'So is there any replacement for the IC-7000 ?

 

Hi James,

 

Maybe somebody out there has plans for a radio similar to the 7000, but I doubt it. I love mine and use it all the time for portable operations and with portable ops. for the Boys Scouts of America.

I do not think there will be another radio like the 7K. Its replacement, the IC-7100, is lacking in the mobile department and, IMHO, is just a terrible looking radio. I have several friends who do like the IC-7100 and it does do everything the 7K does, plus D-Star. So, I wouldn’t hold you breath from Icom. Maybe Kenwood has a replacement for the TS-480 (which is now discontinued).

 

The closest thing out there now is the Elecraft KX3 with either the 2-meter or 4-meter module, plus the KXPA 100 amp. Unfortunately, that set up, while really, really good, will set a ham back about $2000.

 

73,

Jeff/wb0m

 

 

IC-7000 replacement 
From: 
James Fisher
Date: Sat, 31 Aug 2019 13:20:54 CDT 

I use the IC-7000 for mobile operation.
The compact size of the face is excellent and the 160 meter -440 Mhz coverage is needed,.
So is there any replacement for the IC-7000 ?
I have a TS-480 but the face is a bit larger and it does not cover 2 meters and 440.

Thanks
James
Maybe there are enough IC-7000 around that they can always be repaired ?


Re: IC-7000 replacement

w0web <w0web@...>
 


I also have a working IC 7k with the sepertaion kit.

Asking $1000.00usd plus shipping
$850.00 without sep.kit


Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 Sport


-------- Original message --------
From: w0web <w0web@...>
Date: 9/1/19 09:18 (GMT-08:00)
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 replacement

I have an IC-7000 that I would be willing to part with.
But first I'm not sure if it works, I know it powers up and I can hear radio traffic but it has NO mic or power cable.
It is just the radio, no acc.

Ships from 94115

Make a reasonable offer.
73 George


Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 Sport


-------- Original message --------
From: Mystic Treg <MysticTreg@...>
Date: 9/1/19 08:08 (GMT-08:00)
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 replacement

I wish there were more IC7000s around, good or to be repaired.  But we all seem to be selfish and only letting loose when they pry them from our cold, dead, hands.  :-(

Jackie,
on behalf of
Her Imperial Majesty,
Mystic, Kitty


On Sat, Aug 31, 2019 at 11:21 AM James Fisher via Groups.Io <cadiscase=yahoo.com@groups.io> wrote:
I use the IC-7000 for mobile operation.
The compact size of the face is excellent and the 160 meter -440 Mhz coverage is needed,.
So is there any replacement for the IC-7000 ?
I have a TS-480 but the face is a bit larger and it does not cover 2 meters and 440.

Thanks
James
Maybe there are enough IC-7000 around that they can always be repaired ?


Re: IC-7000 replacement

w0web <w0web@...>
 

Ok the low offer of $350.00 is not happening, I do feel that this radio does work, I know that it works no 2 meters & 70cm,
I don't have a good dummy load to test the H/F tranamitter.
Again I feel this radio does work but is being SOLD AS IS and $450. is as low as I will go




Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 Sport


-------- Original message --------
From: w0web <w0web@...>
Date: 9/1/19 09:18 (GMT-08:00)
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 replacement

I have an IC-7000 that I would be willing to part with.
But first I'm not sure if it works, I know it powers up and I can hear radio traffic but it has NO mic or power cable.
It is just the radio, no acc.

Ships from 94115

Make a reasonable offer.
73 George


Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 Sport


-------- Original message --------
From: Mystic Treg <MysticTreg@...>
Date: 9/1/19 08:08 (GMT-08:00)
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 replacement

I wish there were more IC7000s around, good or to be repaired.  But we all seem to be selfish and only letting loose when they pry them from our cold, dead, hands.  :-(

Jackie,
on behalf of
Her Imperial Majesty,
Mystic, Kitty


On Sat, Aug 31, 2019 at 11:21 AM James Fisher via Groups.Io <cadiscase=yahoo.com@groups.io> wrote:
I use the IC-7000 for mobile operation.
The compact size of the face is excellent and the 160 meter -440 Mhz coverage is needed,.
So is there any replacement for the IC-7000 ?
I have a TS-480 but the face is a bit larger and it does not cover 2 meters and 440.

Thanks
James
Maybe there are enough IC-7000 around that they can always be repaired ?


Re: IC-7000 replacement

Prabhu
 

The whole ICOM mid range radios mostly has many inbuilt problems some of the most attended problems were (But good income generator for radio service engineers..Thanks a lot for Icom)
1.Poor heat transfer from semiconductor to radio heat-sink,
2.Very low quality ribbon cable connector almost it can withstand 2 to 3 insert and exit ,
3.The LCD CFL type is a blunder with no replacement spares and more failures ,
4.The LCD Polaroid and display adhesive becomes cracked and get spoiled when used in humid and hot conditions, (Luckily the panasonic camcorder GS27,24 display is same used in icom ic7000)
5.As for as ICOM IC7k ..the driver board heat sink compound is mostly skipped in many batches ,
6.The driver board is mostly in danger if input voltage becomes low (Class A  principle in icom IC7k)
7.The CPU (in 7k) not properly connected to the body in some batches ,that rubber heat conductor location is more important for better transfer,
If icom  might have taken more time in R&D and released this 7k ,This will become a master piece ,just a race with FT897D landed in this amazing radio in confused place,But service engineers are mostly thankful to ICOM for this wonderful radio 😁😁😁
regards ..


On Mon, 2 Sep 2019 at 11:31, Ludovic Ludo <f5pbg@...> wrote:
Le 01/09/2019 à 22:11, Kevin Grantham a écrit :
> The Yaesu FT-857 is a similar format, HF+6+2+70.
I do not like transmission and reception of this tranceiver (same than
FT897).
In addition, this is only an 16 bit DSP.

I prefer the FT991 in the almost same format with a better selectivity
(better than IC7000 / IC7100).

You can wait the IC705 too.

Best regards,
Ludovic - F5PBG
http://radioamateur.forumsactifs.com/t2268-icom-ic705-hf-vhf-dont-50-mhz-et-70mhz-uhf-avis
(use google translate)






Re: IC-7000 replacement

Ludovic Ludo
 

Le 01/09/2019 à 22:11, Kevin Grantham a écrit :
The Yaesu FT-857 is a similar format, HF+6+2+70.
I do not like transmission and reception of this tranceiver (same than FT897).
In addition, this is only an 16 bit DSP.

I prefer the FT991 in the almost same format with a better selectivity
(better than IC7000 / IC7100).

You can wait the IC705 too.

Best regards,
Ludovic - F5PBG
http://radioamateur.forumsactifs.com/t2268-icom-ic705-hf-vhf-dont-50-mhz-et-70mhz-uhf-avis
(use google translate)


Re: IC-7000 replacement

Phillip Potter
 

Icom is getting ready to release the IC-705 and has shown it at the Tokyo Hamfair. You can find pictures online, but the price isn't out yet.

73s Phil, N6OMM

On 9/1/2019 10:58 AM, wb0m wrote:
So is there any replacement for the IC-7000 ?


Re: IC-7000 replacement

Kevin Grantham
 

The Yaesu FT-857 is a similar format, HF+6+2+70. However, it does not have as informative a display, a much more cryptic (but flatter) menu structure, and is a generation older receiver technology (it is a good superhet - the IC-7000 is a very good superhet that also includes DSP). The FT-857 can be equipped with a filter or two to enhance SSB or CW. The IC-7000 doesn’t need plug-in filters because it has DSP filters that are really great.

The Icom IC-7100 is functionally the same as the IC-7000 and adds Dstar. It also has a built-in sound card and USB port which is very convenient and reduces the amount of external stuff to be carried. The physical form is considerably different - it has a console-like control head that is remote from the radio body. It’s a large very readable monochrome display with touchscreen. So whether or not it fits in your intended application is something to consider.

Those are the closest I can think of now.

Kevin N5KRG

1021 - 1040 of 41391