Date   

Re: [IC-7000] I hear audio in the speaker when transmitting

Mystic Treg
 

Look at the sound card settings.  Are you listening to the 'recording device'?


J Tregre,
KD8M,
on behalf of
Her Imperial Majesty,
Mystic, Kitty

On Sat, Jun 2, 2018 at 7:42 PM, Steven Linley <linleysa@...> wrote:

RF getting into audio?  Could be you have a corroded ground.


On 6/2/2018 04:00 PM, Marty wrote:
Hi John,

I'm curious to know if the problem was ever resolved. As of yesterday my 10 year old 7000 just began having faint scratchy audio when I transmit on HF SSB, CW, and RTTY mode (more like a frying hiss) coming from the speaker, internal or external. The symptom goes away if I reduce the output power to around 50% or lower.  AM is OK, but I suspect the lower output doesn't trigger the noise.  No problem on VHF or UHF.   For those who will comment... the faint scratchy audio and/or noise, depending on transmit mode, is there all the time, antenna or dummy load.  It's not RFI.  Ground is good, mic doesn't need to even be plugged in for it to happen on CW when keyed.

-Marty
N6PRX



Re: [IC-7000] I hear audio in the speaker when transmitting

Steven Linley
 

RF getting into audio?  Could be you have a corroded ground.


On 6/2/2018 04:00 PM, Marty wrote:
Hi John,

I'm curious to know if the problem was ever resolved. As of yesterday my 10 year old 7000 just began having faint scratchy audio when I transmit on HF SSB, CW, and RTTY mode (more like a frying hiss) coming from the speaker, internal or external. The symptom goes away if I reduce the output power to around 50% or lower.  AM is OK, but I suspect the lower output doesn't trigger the noise.  No problem on VHF or UHF.   For those who will comment... the faint scratchy audio and/or noise, depending on transmit mode, is there all the time, antenna or dummy load.  It's not RFI.  Ground is good, mic doesn't need to even be plugged in for it to happen on CW when keyed.

-Marty
N6PRX


Re: [IC-7000] I hear audio in the speaker when transmitting

Marty - N6PRX
 

Hi John,

I'm curious to know if the problem was ever resolved. As of yesterday my 10 year old 7000 just began having faint scratchy audio when I transmit on HF SSB, CW, and RTTY mode (more like a frying hiss) coming from the speaker, internal or external. The symptom goes away if I reduce the output power to around 50% or lower.  AM is OK, but I suspect the lower output doesn't trigger the noise.  No problem on VHF or UHF.   For those who will comment... the faint scratchy audio and/or noise, depending on transmit mode, is there all the time, antenna or dummy load.  It's not RFI.  Ground is good, mic doesn't need to even be plugged in for it to happen on CW when keyed.

-Marty
N6PRX


Ic-7000 separation kit

Darrenrlavery@...
 

Noticed the following listing on ebay. 
ICOM - OPC-1444 Separation Cable for The Icom IC-7000 Transceiver.

I see that this seller Joslyn1980 has sold a few going by positive feedback. 
So anyone that's looking one.
This may be a place to get one if your stuck. 
Seller based in UK/Europe. 

Here's the link. 
An Original Brand New Cable In Icom Sealed Packaging ICOM - OPC-1444 Separation Cable for The Icom IC-7000 Transceiver.


Re: An auto tuner for my IC-7000

Gene Santoski
 

Good choice!


I have also used the SGC 237 with good results

73


DE K9UTQ

 


On 2018-05-23 10:27, Roeland Jansen, PA3MET wrote:

I am using an LDG for both the 7000 as well as the 7100. The AT200PROII


Re: An auto tuner for my IC-7000

WW3S <ww3s@...>
 

I've been using an it100 but..,,also damaged my rig three times !!!! Last years field day was the first id used it since the last repair and after 6 hrs or so, used on cw and/or rtty, it crapped out again, only about 15 to 20w out...it sat until recently when i emailed Matt at SAR in Michigan and he asked me call him....first thing he asked was am i using a LDG tuner....apparently the 7000 doesn't like the rapid switching and swr spikes caused by the tuner....debating whether to fix it again, or try to sell as is..,,receive is fine and vhf/uhf transmit fine, just very low output on hf....

----- Original Message -----
From: Roeland Jansen, PA3MET <roeland.jansen69@gmail.com>
To: ic7000@groups.io
Sent: Wed, 23 May 2018 11:27:40 -0400 (EDT)
Subject: Re: [ic7000] An auto tuner for my IC-7000

I am using an LDG for both the 7000 as well as the 7100. The AT200PROII


Re: An auto tuner for my IC-7000

Roeland Jansen, PA3MET
 

I am using an LDG for both the 7000 as well as the 7100. The AT200PROII


Re: An auto tuner for my IC-7000

Gene Santoski
 

I use the Icom AT-180.  Works great and self tunes when you change frequencies or bands.  You can also MANUAL tune when desired.
73

K9UTQ

On Tuesday, May 1, 2018, 10:46:54 AM CDT, Bill Turner via Groups.Io <w4wnt@...> wrote:


The IT-100 is good to 100 watts for ssb and CW, but only good to 30 watts for digital modes.


Re: IC-7000 and LDG IT-100 ,trouble ?!?!?!

Pete N
 

I have been using an IT-100 in my mobile setup for a few years. The radio has not blown up yet.  

Low power is typically due to low DC voltage not SWR although above 1.5 the radio does cut back rather quickly.  I run mine off a deep cycle battery which is charged from the vehicle electrical system through a Schottky diode so I don't quite get 13.8V and rarely get the full 100 W out. 


Re: IC-7000 and LDG IT-100 ,trouble ?!?!?!

Ron
 

I have an IC-7000 and I bought an LDG AT-200 PRO II this week.  The tuner really acts erratic & now it's on it's way back to the store from where I bought it.
I also noticed that the SWR varies way too fast during  a tune cycle.  The tuner even wants to spend a long time trying to tune a resonant antenna while
subjecting the 7000 to very high SWR.  The 2000 memories that the LDG claims to have doesn't seem to work.  The tuner wants to tune almost all the time.
Oh, when placing the tuner in bypass mode and using a dummy load as the antenna the LDG's  LED SWR meter reads almost 2:1  while the IC-7000 is seeing 1:1.

Good luck and I understand Matt at SARTS does excellent work.

Ron  W4UT


On 5/2/2018 9:29 PM, WW3S wrote:
My IC-7000 crapped out, again, at Field day last year, no , or low power on HF, (don’t think it’s the fuse problem, as the power cord is not fused, connects to a rigrunner)...second time it happened. and Field day was the first time back on the air after the other repair.....I was talking to Matt at SARTS and he asked if by chance I was using an LDG tuner, which I have been, both time it did this , and he said for some reason the 7000 doesn’t like the LDG tuner, that even though its on low power, when it does it search the SWR varies too much too fast.....any one else experience this.....the radio works fin on VHF/UHF, and receives fine on HF, but only puts out about 15-20 watts or so....Matt suspects it’s the finals, but the previous repairs had something to do with the driver circuitry....


IC-7000 and LDG IT-100 ,trouble ?!?!?!

WW3S <ww3s@...>
 

My IC-7000 crapped out, again, at Field day last year, no , or low power on HF, (don’t think it’s the fuse problem, as the power cord is not fused, connects to a rigrunner)...second time it happened. and Field day was the first time back on the air after the other repair.....I was talking to Matt at SARTS and he asked if by chance I was using an LDG tuner, which I have been, both time it did this , and he said for some reason the 7000 doesn’t like the LDG tuner, that even though its on low power, when it does it search the SWR varies too much too fast.....any one else experience this.....the radio works fin on VHF/UHF, and receives fine on HF, but only puts out about 15-20 watts or so....Matt suspects it’s the finals, but the previous repairs had something to do with the driver circuitry....


Re: An auto tuner for my IC-7000

Bill Turner
 

The IT-100 is good to 100 watts for ssb and CW, but only good to 30 watts for digital modes.


Re: IC-7000 used value - If it's mint $800 at least

Vesko
 

Еach owner of this little jewel seeks to keep it until he encounters another such little good jewel,....
Greetings,
VEsko LZ2JE

On Thursday, April 26, 2018, 3:43:00 AM GMT+3, W1JCW <w1jcw@...> wrote:


Not me, have three!

 

73-

W1JCW

John

 

From: ic7000@groups.io [mailto:ic7000@groups.io] On Behalf Of Mark Schoonover
Sent: Wednesday, April 25, 2018 9:59 AM
To: ic7000@groups.io
Subject: Re: [ic7000] IC-7000 used value

 

Who would sell their 7000? :)


 

On Wed, Apr 25, 2018 at 7:19 AM, Hank Blackstock via Groups.Io <w5hj1@...> wrote:

I recently paid $750 shipped from HRO for one that appeared new.

Hank Blackstock

 

 

No trees were harmed in the creation of this message, but a large number of electrons were terribly inconvenienced.


On Apr 25, 2018, at 8:30 AM, WA8Y Steven <stevenlinley1@...> wrote:

$800 -900 for a clean like new one.

 

On Wed, Apr 25, 2018, 6:38 AM Helmut Wabnig <hwabnig@...> wrote:

On Wed, 25 Apr 2018 03:13:20 -0700, you wrote:

>Whats a IC-7000 selling for these days?


650 to 750 euros


OE8UWW


 


Re: An auto tuner for my IC-7000

wb0m
 

Hello Marco,

I’d vote for the AH-4 or a SGC tuner, although it’s not one of you chocies.
Maybe a bit more $$, but very versatile and they work great, whether its a long wire, dipole, loop or vertical. Plug & play.

GL & 73,
Jeff/wb0m


Re: An auto tuner for my IC-7000

Ludovic Ludo
 

Hello,

AH-4 need a command wire.

To answer to the question, i prefer a wellknow Smartuner SG230.
Much expansive but better quality.

I use mine for 20 years like you can see on qrz.com.
(long wire before and now loop)

Best regards,
Ludovic - F5PBG.


R: Re: [ic7000] An auto tuner for my IC-7000

Federico BALDI
 

A stupid question...why not an AH-4 by ICOM? 73 de Federico IZ1FID

----Messaggio originale----
Da: kc4tvo@...
Data: 30-apr-2018 15.45
A: <ic7000@groups.io>
Ogg: Re: [ic7000] An auto tuner for my IC-7000

The IT-100 requires that you tune it with the front button or the tune button on the radio, it is not fully automatic.  That is not really evident from the description.  The 100 or 200 Pro II are automatic.

 

From: ic7000@groups.io [mailto:ic7000@groups.io] On Behalf Of Max White
Sent: Monday, April 30, 2018 8:03 AM
To: ic7000@groups.io
Subject: Re: [ic7000] An auto tuner for my IC-7000

 

The one that is produced for that rig - the IT-100. I also use the paired tuner for an 897.

 


From:ic7000@groups.io <ic7000@groups.io> on behalf of Phil Baird via Groups.Io <mypactor@...>
Sent: 30 April 2018 08:27
To:ic7000@groups.io
Subject: Re: [ic7000] An auto tuner for my IC-7000

 

 

MAX, what ldg model are you using?
 Thanks, Phil, Prescott, AZ

On Sunday, April 29, 2018, 11:37:44 PM MST, Max White <bmews@...> wrote:

 

 

I run a 7000 mobile with the respective LDG model at the back end of it, into a 102" whip, or long wire if parked up - not had a problem and copes well.  73 Max/M0VNG

 


From:ic7000@groups.io <ic7000@groups.io> on behalf of MARCO EVANGELISTA <marcoevang@...>
Sent: 29 April 2018 22:18
To:ic7000@groups.io
Subject: [ic7000] An auto tuner for my IC-7000

 

HI,
I would like to purchase an automatic tuner for my 7k. I have selected the MFJ-939I and the MFJ-993B.
 I would prefer the latter, as it is way more versatile. However, as far as I have understood, when I change frequency, the 939I tunes up without the need to push the "tune" button, while the 993B requires button pushing.
Have I understood well? 
Any recommendations for a good tuner?
73 Marco




R: Re: [ic7000] An auto tuner for my IC-7000

Federico BALDI
 

A stupid question why not the ICOM AH-4? 73 de Federico IZ1FID

----Messaggio originale----
Da: mypactor@...
Data: 30-apr-2018 9.27
A: "ic7000@groups.io"<ic7000@groups.io>
Ogg: Re: [ic7000] An auto tuner for my IC-7000


MAX, what ldg model are you using?
 Thanks, Phil, Prescott, AZ
On Sunday, April 29, 2018, 11:37:44 PM MST, Max White <bmews@...> wrote:


I run a 7000 mobile with the respective LDG model at the back end of it, into a 102" whip, or long wire if parked up - not had a problem and copes well.  73 Max/M0VNG




From: ic7000@groups.io <ic7000@groups.io> on behalf of MARCO EVANGELISTA <marcoevang@...>
Sent: 29 April 2018 22:18
To: ic7000@groups.io
Subject: [ic7000] An auto tuner for my IC-7000
 
HI,
I would like to purchase an automatic tuner for my 7k. I have selected the MFJ-939I and the MFJ-993B.
 I would prefer the latter, as it is way more versatile. However, as far as I have understood, when I change frequency, the 939I tunes up without the need to push the "tune" button, while the 993B requires button pushing.
Have I understood well? 
Any recommendations for a good tuner?
73 Marco



Re: An auto tuner for my IC-7000

Steve W3AHL
 

On Sun, Apr 29, 2018 at 02:36 pm, MARCO EVANGELISTA wrote:
HI,
I would like to purchase an automatic tuner for my 7k. I have selected the MFJ-939I and the MFJ-993B.
 I would prefer the latter, as it is way more versatile. However, as far as I have understood, when I change frequency, the 939I tunes up without the need to push the "tune" button, while the 993B requires button pushing.
Have I understood well? 
Any recommendations for a good tuner?
73 Marco

 The first question should always be what types of antennas are you using?  Any thing else we should be aware of about your installation (mobile, second floor shack with poor RF ground, switching among different antennas on the same band, etc.) ?    Some tuners work OK with some antennas and don't work at all with others....

I would avoid MFJ, due to continuing erratic quality control problems.

Steve, W3AHL


Re: An auto tuner for my IC-7000

Bob Rodgers <kc4tvo@...>
 

The IT-100 requires that you tune it with the front button or the tune button on the radio, it is not fully automatic.  That is not really evident from the description.  The 100 or 200 Pro II are automatic.

 

From: ic7000@groups.io [mailto:ic7000@groups.io] On Behalf Of Max White
Sent: Monday, April 30, 2018 8:03 AM
To: ic7000@groups.io
Subject: Re: [ic7000] An auto tuner for my IC-7000

 

The one that is produced for that rig - the IT-100. I also use the paired tuner for an 897.

 


From: ic7000@groups.io <ic7000@groups.io> on behalf of Phil Baird via Groups.Io <mypactor@...>
Sent: 30 April 2018 08:27
To: ic7000@groups.io
Subject: Re: [ic7000] An auto tuner for my IC-7000

 

 

MAX, what ldg model are you using?
 Thanks, Phil, Prescott, AZ

On Sunday, April 29, 2018, 11:37:44 PM MST, Max White <bmews@...> wrote:

 

 

I run a 7000 mobile with the respective LDG model at the back end of it, into a 102" whip, or long wire if parked up - not had a problem and copes well.  73 Max/M0VNG

 


From: ic7000@groups.io <ic7000@groups.io> on behalf of MARCO EVANGELISTA <marcoevang@...>
Sent: 29 April 2018 22:18
To: ic7000@groups.io
Subject: [ic7000] An auto tuner for my IC-7000

 

HI,
I would like to purchase an automatic tuner for my 7k. I have selected the MFJ-939I and the MFJ-993B.
 I would prefer the latter, as it is way more versatile. However, as far as I have understood, when I change frequency, the 939I tunes up without the need to push the "tune" button, while the 993B requires button pushing.
Have I understood well? 
Any recommendations for a good tuner?
73 Marco


Re: An auto tuner for my IC-7000

Max White
 

The one that is produced for that rig - the IT-100. I also use the paired tuner for an 897.




From: ic7000@groups.io <ic7000@groups.io> on behalf of Phil Baird via Groups.Io <mypactor@...>
Sent: 30 April 2018 08:27
To: ic7000@groups.io
Subject: Re: [ic7000] An auto tuner for my IC-7000
 

MAX, what ldg model are you using?
 Thanks, Phil, Prescott, AZ
On Sunday, April 29, 2018, 11:37:44 PM MST, Max White <bmews@...> wrote:


I run a 7000 mobile with the respective LDG model at the back end of it, into a 102" whip, or long wire if parked up - not had a problem and copes well.  73 Max/M0VNG




From: ic7000@groups.io <ic7000@groups.io> on behalf of MARCO EVANGELISTA <marcoevang@...>
Sent: 29 April 2018 22:18
To: ic7000@groups.io
Subject: [ic7000] An auto tuner for my IC-7000
 
HI,
I would like to purchase an automatic tuner for my 7k. I have selected the MFJ-939I and the MFJ-993B.
 I would prefer the latter, as it is way more versatile. However, as far as I have understood, when I change frequency, the 939I tunes up without the need to push the "tune" button, while the 993B requires button pushing.
Have I understood well? 
Any recommendations for a good tuner?
73 Marco

1601 - 1620 of 41445