in the adjustment menu i can not get the driver idle current down to the 1 amp setting the lowest it will go to is 2.56 amps
but it could be some leakage on any of the other output transistors ?
i get over 100w on all hf, but only 84.7w on 6m, and 44w on vhf and uhf starts at 34w but then drops very fast to 27w, the temp gauge
rises high very fast when on uhf, I am using a calibrated Bird 4391 to do these tests in to a very good 50ohm dummy load,
but i suppose the best way to test is to test the current were it goes in to each output trany, what do you all think,
Thanks Dave 2E0DMB