toggle quoted messageShow quoted text
With info from AB1DD I have connected pins 3+7 together using
menu item 20 and all works fine now.
Thanks for your help again
On 16/02/2019 09:31, Branko wrote:
Maybe I was not precise enough. I use ACC 13
pin DIN socket . For VHF and UHV band need to connect pin 3
and pin 7 for PTT .
Pin 3 is for operation up to 50 MHz and pin 7
is for 2m and 70cm work.
Pin 3 and pin 7 need to be connected !!!
Thanks Robin I will have to make a new lead and give it a
15/02/2019 20:02, Robin Williams wrote:
I think you have to use the 6 pin socket
to get ptt on vhf/uhf
Am using the 7000
for FT8 and using the accessory socket to interface to
the pc via a commercial interface lead (am not using
CI-V) everything works on all the HF bands including
no problems but the ptt is not working on VHF/UHF have
checked all the menu setting but can't find an option
to enable/disable on VHF/UHF