Re: Ic 7000 problem


Chris
 

Will try that thanks




On Sun, Mar 25, 2018 at 8:08 AM -0700, "wb2ymu via Groups.Io" <wb2ymu@...> wrote:

Make sure you have the proper gauge wire, at least 10-12ga. It does draw amps and will shut down if wire gauge is to thin. Also check your antenna grounding.

I had the same problem. I ran the power cable straight to the battery, not chassis ground. I cleaned and tightened the antenna ground and re-checked SWR.

Problem gone..

Join ic7000@groups.io to automatically receive all group messages.