Re: [IC-7000] Re: IC700 and PRO7 IC headset RFI on my rig


Colin Christie
 

Noted chuck.
Thank you
73
Colin



From: "Charles Scott cscott@... [ic7000]"
To: ic7000@...
Sent: Friday, 25 November 2016, 7:15
Subject: Re: [IC-7000] Re: IC700 and PRO7 IC headset RFI on my rig

 
Just to clarify, the common-mode choke needs to be on both the coax and the control cable to the tuner. The situation with respect to common-mode currents is the same for both cables and there should either be good common-mode chokes on each or together into one common-mode choke. Also, distance for the control cable isn't a problem if reasonable gauge is used and there's proper attention to lightning/impulse protection.
Chuck - N8DNX

On 11/24/2016 2:31 PM, w3ahl@... [ic7000] wrote:
The AH-4 has a control cable to the radio, so mounting at the feed point of distant antenna is not recommended.  Wherever it is mounted the common-mode choke should be place on the coax to the radio AT the tuner.  The AH-4 input and output is inherently unbalanced for any type of antenna, so a VERY GOOD common mode choke is needed
.....
Steve, W3AHL



Join ic7000@groups.io to automatically receive all group messages.