Re: [IC-7000] HM-151

James Fisher

I asked that question several years ago and there was NO way to do that.

It would  have been a good idea.


On Saturday, February 15, 2014 8:19 AM, Robert Agnew <robert.agnew@...> wrote:
Is there a way (when you are in memory mode) to initiate scanning from the hm-151?  I have been able to step manually through the channels as you describe but never figured out how to initiate scanning in memory mode.  The F1 & F2 do not have a scan function that can be assigned (that I could find anyway).

From: ic7000@... [mailto:ic7000@...] On Behalf Of jean claude derome
Sent: Thursday, February 13, 2014 01:01
To: ic7000@...
Subject: Re: [IC-7000] HM-151
how to start a VFO scan or Memory with micro hm 151 
thank you for answers
Le Jeudi 13 février 2014 2h28, W1JCW <w1jcw@...> a écrit :
You need to be in memory mode not vfo.
Press the vfo/mem button on the mic or radio and the " ^ " and down will scroll through your stored frequencies
Band up and down can be used via the ^ and down arrows to the left of the vfo on the rig or press the corresponding band
indicators on the mic.
From: ic7000@... [mailto:ic7000@...] On Behalf Of Dain Webster
Sent: Wednesday, February 12, 2014 12:24 PM
To: ic7000@...
Subject: [IC-7000] HM-151 programming
I don't see how the mic button can maneuver through the memory bands and channels.   I have to see if the F1 and F2 can be programmed for that.  Has anyone got a recommendation there?  

Join { to automatically receive all group messages.