1. Messages
  2. [IC-7000] Re: IC-7000 don´t want to switch on

[IC-7000] Re: IC-7000 don´t want to switch on

ea1rj <ea1rj@...>
 

Hi all,

Many thanks for your great info. My friend has tryed to clean the display contacts but this haven´t fixed the problem, so he´ll take the TRX to me for an internal check.

Thanks a lot es 73

EA1RJ - Ricardo

--- In ic7000@..., "Ivan Silva" wrote:

I advise to follow all the way from 12 v up to the control unit. I've fixed
two IC7000 that have had same problems in the metalizing of the holes on
the printed circuit board where the thread passes from one side to the other
side.



Ivan-PY1YB



_____

From: ic7000@... [mailto:ic7000@...] On Behalf Of
VE3FMC
Sent: sábado, 19 de janeiro de 2013 22:59
To: ic7000@...
Subject: [IC-7000] Re: IC-7000 don´t want to switch on





I had that problem once after I moved the radio. It was due to the fact that
the face plate was loose, must have hit the release when I moved the radio.
Reseated it and the radio was fine after that.
Rick

--- In ic7000@... , "dajetzi"
wrote:


Hello,
did the trx not switch on at all, means there is no display visible?
How do you did a reset when trx did not switch on?

Have you checked the contacts from the front panel?
Maybe the display unit get short.
Take a look here.

Relay klicking
0g-ZzcStZC9L3fEmmQ5RAamc_bSgBsCei_D7ao8G-A_aAAaFw3HQ/ic7000-relay-click-&#92;
click-no-power-problem.pdf>

73 de DO1KLM, Sigi




[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]
Join ic7000@groups.io to automatically receive all group messages.