I was searching through my archives as well to remember the functions I had setup on my VX-1210. That and the channel abbreviations. (H was obvious, but I don't remember Z) Had fun playing with it at

Many thanks Bonnie. I will use the resources kindly provided. Have just printed the service manual. Is the battery charger manual available? I may have to build one from scratch as they are not

There is a little-known Factory Service admin programming mode for the VX-1210. It provides for alignment and setting of the circuits. Avoid this hack, unless you are one skilled in the art, and

On Fri, May 19, 2023 at 08:21 PM, Bonnie KQ6XA wrote: https://hflink.com/vx1210/Vertex_VX-1210_serv.pdfVX-1210 Microphone information, schematic, and

VX-1210 Service Manual https://hflink.com/vx1210/Vertex_VX-1210_serv.pdf -Bonnie KQ6XA

Here are some VX-1210 files that might help you with

Hello Matt, I am new to the PCALE stuff and this is in regards to the PC-ALE software. I had a hard time finding the download and hopefully I have the correct version. When I start the PC-ALE

It would help us help you if you gave us just a tiny bit of additional information.... What are you trying to do (application, etc.) that you get this message from? Matt AL0R

Hello All, I am receiving the error message "Serial Port 1 NOT Available for CAT". I have been researching with no luck. Any help would be appreciated. Thanks, Bryan KC9AOE

Hi All! The VX1210s have reached me. I don't know how many can be revived as they are from a junk dealer.As of now, my HAM Shack is under repair. So everything has been mothballed to keep off the

New Selcall numbers updated in the directory database: http://hflink.com/selcall/directory/ W4GAF 3567 VE7OI 3359 VK5FR 5156 -Bonnie KQ6XA HFLINK Coordinator

Thank you Bonnie!

Thank you for doing this! This will be a big help. The HFLink Group seems to be to have the deepest knowledge anywhere of this radio. Jim K0JNR

On Mon, May 8, 2023 at 10:59 PM, James Morris (W7TXT) wrote: The front of the manual says "S-15305XZ-C1 July 2016". These lines are shown for J3305, "Tuner", pins 8 & 9. Looks like this is a PCB

I've taken the liberty of creating a new groups.io group for F8101 technical discussion. It seems there was a Yahoo group in the past that did not survive the shutdown. Please feel free to

Bonnie, et al, Planning to build a new antenna. I am considering the butterfly optimized for 40 m and the house mounted inverted vee. Since I will need a separate antenna mast, what is the minimum

The front of the manual says "S-15305XZ-C1 July 2016". These lines are shown for J3305, "Tuner", pins 8 & 9. Looks like this is a PCB header, and these lines are not connected to the DB9 socket. I'll

On Mon, May 8, 2023 at 07:42 PM, James Morris (W7TXT) wrote: I noticed a couple of interesting pins in the F8101 tuner interface, which are mentioned in the service manual but apparently nowhere

I noticed a couple of interesting pins in the F8101 tuner interface, which are mentioned in the service manual but apparently nowhere else: TUTXD and TURXD. Seems like a serial data interface with a

Hey Group, good evening. I have a friend that currently has the IC-F7000 and has firmware version 1.3 Does anybody have a more current version that we could download so my friend can use his radio and