Hi All, I tried to get this JTDX control to run, but I dont get it. First try, JTDX No Radio, open TRX in L32, RCP workes, the JTDX Panel shows the Frequenz & Mode in red, green/red LED workes, also H

Hi Bob, ran the update on several computers with absolutely no unexpected effects. Thanks for all! As far as I can see everything is running at least as well as before. Great job. The only thing I not

Thank you Bob for all your hard work. I installed version 4 with no problems and it's already updated. Piece of cake. Of course I backed up my 3.5 files just in case <g>. I've been using this program

Upgraded to version 4 last week with no problems. Tried to open Logger32 this morning to add some ADIF files all was well up to the last item on the splash screen about "Rotator Log". I do not have a

Hi all, the error that causes the Logger32 program to close as explained in the msg. that I report below, is shown in the Windows 10 PRO 64 Bit Event Viewer that I am using. Below I insert the msg. Er

<no text>

I have a change with V4. When using WSIT-x in that the populated Logger32 logbook entry window, that occurs automatically, when 'Enable TX' is activated on the WSIT-x window (so as to start a QSO not

I have updated to Ver4 completely and noticed that JTDX-TCP to L32 works but every now and then L32 will crash when sending to LOTW, or Clublog, Or QRZ (i run all 3). Has anyone else seen this? Chuck

HI. Tray to work rtty from a long time.....when I press the sound card button, mmtty it refuses to open. When I press the option in VIEW/show sound card data, l32 switch off completely. How to fix thi

Statistic stops at SJ90 pfx. 73 Carlo IZ3ETU

Hi All Wondering if anyone else has this problem on V4.0.235 using WSJT-X. Upgraded from V3 to V4 no problem here. When clicking on a callsign on the bandmap using WSJT-X (via UDP) the locator transfe

I am in the middle of moving my station software from one PC to another and have run into ADI/BAD.adi problems. I have a good .ADI backup of my logbook but when I load it into the new Logger software

DEAR BOB, thank you for the excellent work however and unless I am mistaken, when I importing an adif log of another instance on my logbook, the new qso does not increment the existing qso number but

I hadn’t noticed this before, as there are very few ‘new ones’ but my alert sounds don’t work. I push test and nothing happens. Am I missing something? Am I the only one? 73 w4uck Jim Altman jaltman63

Hi Bob, compliments for the great job and tnx so much for the best log program for us OM. For the new version 4 I had no problem with the update, I use a dual monitor and in version 4 the tooltips are

Hi guys, pls, can you help. I am bit lost and confused. I have an issue I was in my logbook called "Logbook32". I switched to logbook called OK1RJO and worked FT8 QSO there. When I switched back to my

Hi Guys, I started to use LoTW several days ago for my personal callsign and for club callsign. For both callsignes I use separate Logbooks in L32. My callsign = 1 operator, club = 3 ops now including

Auto logging does not seem to be working for FT8. Checked my band plan table all ok as nothing changed from before conversion. If I manually select log qso from wsjt-x I see a flash on the l32 page bu

Imported without problem. I had backed up my log to an adif file on a memory stick. V4 installed first time. My log imported exactly. Did a recalc. Everything back to normal. My only glitch was in set

Hello all I'm Rick EA4M a new user of Logger32 , I'm wondering if it's possible to bind F1 to F12 keys with shortcuts like CRTL+A to move the rotor or CRTL+C to clear the qso fields..... Thanks a lot