Ham Loggers and Zakers While attempting to program the shell button for Zakanaka, I used the following command lines and neither worked. Any suggestions? C:\Program~1\Zakanaka\zakanaka.exe

I was having problems connecting my radio, packet and PSK31 PTT port to a Pentium 166 Mhz computer. I previously had the setup running on a 486DX33 but it was too slow for PSK31. The serial cards that

Just wanted to let everyone know, that my club VE9LC in New Brunswick will have streaming video from our Field Day site Live on Internet. We will also have live audio and hopefully live logs from Writ

I am getting the following error when starting Logger: >>> Start Couldn't find your Notepad. I am unable to create a new one for you. Please check this out. If this is the first time you have run Logg

Is there a way to get Logger to tune the radio to a spot that shows up on the DX cluster ? -- #6P001 <ask me how to get yours!> 6Plus Activity Club Dedicated to increasing 6 meter and above PSK Activi

Hello Im a new user to Logger Im using 7.05. During a log entry session I got into IOTA then county and could not seem to get out of county I finnaly got a error msg to delete my non-exsistant entry i

Thats it . With the precious information, Iwent to the site and got new zaka.exe.. Everything is working now. Bob do not bother to answer my email... Thank you. Jose Bonanca jbct1aos@... ct1aos

Thanks to those who responded I have logger back up but I seemed to have lost some contact entries. My advice to everyone would be to make a backup disk of you logs. Maybe two disk. Thanks Morris WA4M

I am using Logger 7.05, and I have just discovered that, if I click on a call in the DX Cluster callsign listing, the call enters but not the frequency. I often have to click several times, and it see

Hi, I've been using Logger 7.03 for several months on a 486DX33 computer and like it very much . This week I upgraded to a Pentium 166 Mhz computer so that I can try PSK-31. I downloaded Logger 7.05 a

Hello Folks, who has a cicuit-diagramm to use the Yaesu-Rotor on the COM-Port how it is in Logger defined? I only found a Rotor-Interfaces that use the LPT-Port. Can i configure this kind of Interface

Greetings, I recently downloaded the upgrade (7.05) version of logger. When trying to use it I get a message advising me that it cannot find a file called CMDIALOG.VBX Can someone please advise me if

I put the download site in my favorites and just checked back each day untill it was posted. Morris ________________________________________________________________________ Get Your Private, Free E-ma

http://www.geocities.com/CapeCanaveral/6030/Wintty/ I brelieve that this site has a program that will convert ascii to adif. Give it a whirl 73, Chas N2hig Kl0nr@... wrote:

Hello, is there anybody who has a circuit-diagramm for building an interface to control a Rotor by Logger Ver 7.05 ? There is only the COM-Port option in the menu available, but the most interfaces ar

I am using zakanaka v7b with logger v7.05, trying to get the log function button to work. I have carefully read the help file and seem to be at the right place double clicking a call from zak into log

In my explanation I should have said log qso function which is in logbook window not logpage window. Look in logger help at "capturing a callsign", it mentions if your in real time logging from on air

Hi all, After installing the upgrade for 7.05 (was 7.02b) I no longer get a DX spot warning bell/chime when new DX comes through the cluster...The DX warning sound is checked in the main config/sound

Hi, Exporting QSL data to ADIF format all the SWL QSL information is lost. Is that what happens to other systems than mine? 73, Alec/SP2EWQ

Hi, I wanr to fun run the cw function in logger using an older PK 232 and maintain the logging function in Logger. Can someone explain to me how to cable from the computer to the tnc to the radio to a