Bob, Additionally, is there a way to have Logger32 track the rig frequency from N1MM+ , or can you add this feature (connect the radio in N1MM but listen to the rig frequency in Logger32)? Thanks and

Hi! Could you make it possible to use wild-cards or prefices in the Blocked cherry-picking callsigns table? So that, for example, to block all IOxxx callsigns, I could use IO*. Thanks! -- 73 Vytas LY3

Hello all, New to the group, just installed Logger32. Has anyone interfaced Logger32 with N1MM+? My goal would be to auto log contest QSOs in N1MM+ to Logger32 via a real-time link. There is a small g

HI. Does anyone know for sure where FO/AK4T is located? Logger32 suggests Austral Is but I doubt it. I can’t find any news of an Austral DXpedition at the moment, and Igor’s QRZ page says almost nothi

Guess I need new fingers. I have a 5 second delay when using my MORTTY (for CW) device with Logger32. I have my keyer connected to the MORTTY and works no problem When I use the F Keys for sending CW,

Sorry, finger problem and my last email was sent before I finished I gather there are few if any folks out there trying to use the MORTTY (for CW) device with Logger32. For note it works properly with

I gather there are few folks using Logger32 and the MORTTY (CW) device. The MORTTY works great with N1MM. I am still not able to get it to work properly with Logger32. It does what it is suppose to do

Hi all JTDX v2.0.1-rc137 (evaluation version) has been released and you can download at http://www.jtdx.tech/en/ FT4 is not supported yet, however it is much more reliable than wsjt-x for FT8. Please

I have forgot how to add a new callbook for a new call. I am QSL manager for EK6DO who is now ST2/EK6DO. I want to add a new logbook for this op. Help appreciated. Tnx Phil

Hi all, I was testing FT4 with the WSJT-x rc7, when I noticed that the udp bandmap gave the wrong band, also on FT8. It is checking on 70 cm. Thought it might be the rc7 so I switched back to the last

Hi to all. I recently got the IC-7300 as a replacement to my old radio, and I have the following issue: Every time that I an "clicking" to a spot in any phone mode the radio goes to the Filter No.2 in

Not had any emails for the last two days

Assume I no nothing, which is true, can anyone help me set up DX Cluster access via Logger32, thanks 73 Tony

Just enabled mu Autolookup feature and have it set to HAMQTH. Works fine except along with the pop up window with the info I also am getting a window popping up stating "Can't find QRZ Lookup Module".

Our morning group has a new Lotw user. The user in question is listed in the lotwusers.txt file but he does not show as a user when I enter him into my log. Is the Lotwuser.txt file where Logger32 get

Hi guys, with the last version of the best log program I've the problem that in some spot appear strange comments as shown in the attached image. What could be my problem? 73's Lenio - IZ5ILJ - #69.

Hello guys, How do I bring the L32 \ loggSinc window to the front. I can not bring it forward and use the program. Im using Logger v3,50,387 and L32LogSync v.2.0.0.4. 73 Marcos Lima PY1ME

Running 3.50.387 and when logging a QSO with a previously worked station, the State Field is not auto filling.The Enable QSO Updates from Logbook is checked. Now, once I manually enter the state for t

So most of the time when I run the simple awards for ft8 I get the proper amount of qso at about 792. Then sometimes I run the report and get 50. I close the program and run again with the same result

Hello Everyone, I run WSJT-X/FT-8 with a microHam SO2R setup. I've managed to get two WSJT-X apps running on the two radios. My problem is with only one WSJT-X band map running, I have to open up the