Topics

Issue with edit admin subdivision info

Zrinko Zibert
 



Hi folks,

moved to new PC, fresh L32 install + update, but, when I want to edit State/county, right click => edit admin subdivision info, nothing happens. Tried to find via find lost window, no success.
Any suggestions?
Thanks...


--
73s, Zrinko Zibert (Zik) DK8ZZ, VE3ZIK, YT3ZZ

Bob
 

The Change Admin Subdivision window is only visible as long as it has the focus. So, what has probably happened is with your new PC setup and different screes resolutions, the window is probably off the screen somewhere. Going to view to look for lost windows removes the focus from the Change Admin Subdivision window and it automatically closes. So, what to do? Edit the Logger32.INI file. and look for this

[frmEditState]
Window Top=9840
Window Left=12630

Change it to

[frmEditState]
Window Top=0
Window Left=0

Save the changes and run Logger32. The Window should now appear at the top/left corner of the screen.  SeventyThree(s).

On 07/27/2020 3:24 PM Zrinko Zibert <ve3zik@...> wrote:




Hi folks,

moved to new PC, fresh L32 install + update, but, when I want to edit State/county, right click => edit admin subdivision info, nothing happens. Tried to find via find lost window, no success.
Any suggestions?
Thanks...


--
73s, Zrinko Zibert (Zik) DK8ZZ, VE3ZIK, YT3ZZ

Zrinko Zibert
 

Will try it tommorow.

Bob, thanks for all your effort from an old Logger user (still remember Logger 16 bit and even an DOS version, HI)


DK8ZZ, VE3ZIK, YT3ZZ


Bob <k4cy@...> schrieb am Mo., 27. Juli 2020, 21:39:

The Change Admin Subdivision window is only visible as long as it has the focus. So, what has probably happened is with your new PC setup and different screes resolutions, the window is probably off the screen somewhere. Going to view to look for lost windows removes the focus from the Change Admin Subdivision window and it automatically closes. So, what to do? Edit the Logger32.INI file. and look for this

[frmEditState]
Window Top=9840
Window Left=12630

Change it to

[frmEditState]
Window Top=0
Window Left=0

Save the changes and run Logger32. The Window should now appear at the top/left corner of the screen.  SeventyThree(s).
On 07/27/2020 3:24 PM Zrinko Zibert <ve3zik@...> wrote:




Hi folks,

moved to new PC, fresh L32 install + update, but, when I want to edit State/county, right click => edit admin subdivision info, nothing happens. Tried to find via find lost window, no success.
Any suggestions?
Thanks...


--
73s, Zrinko Zibert (Zik) DK8ZZ, VE3ZIK, YT3ZZ