Fw: [hamlogger] v4.0.278 auto-update is on-line ...


g4girhb0
 

Bob
 
The only thing not happening with the JTDX/DXSPOT mod, is the Logging window is not populated with the Call sign etc, after clicking on the DX SPOT.
 
73
 
Ian
G4GIR
 

----- Original Message -----
From: Ian <IAN.FRITH@...>
Sent: 14/10/2021 15:44:38
Subject: Re: [hamlogger] v4.0.278 auto-update is on-line ...

Cheers Bob,
Seems good.
 
73
 
    Ian G4GIR
 
----- Original Message -----
From: Bob <k4cy@...>
Sent: 14/10/2021 15:20:24
Subject: [hamlogger] v4.0.278 auto-update is on-line ...

This is primarily a maintenance release. Several small bugs are fixed.
Eelcraft K4 CAT support is added. It is essentially the same as the K3, but as users find differences between the two they will be added to the K4 support. The K4 CAT commands may use a embedded $ in the command. This interferes with the Logger32 practice of making macros like this $command MaryHadALittleLamb;$ now the K4 may have $command Mary$Had$A$Little$Lamb$;$. This won't work, so if your K4 macro includes embedded $, then replace them with chr(36) and your K4 macro becomes $command Marychr(36)Hadchr(36)Achr(36)Littlechr(36)Lambchr(36);$.
Also, in this version, if you are running JTDX with the JTDX control panel connected, you can click on FT4/8 DX Spots on different bands/modes and the JTDX control panel will QSY JTDX.
SeventyThree(s).


g4girhb0
 

Plus the WORKED/CONFIRMED TABLES are not updating. Also if the spot isn't a recognized FT8/FT4 frequency L32 rejects it. I guess there's now't you can do about that?
 
 
73
 
Ian G4GIR
 

----- Original Message -----
From: g4girhb0 via groups.io <ian.frith@...>
Sent: 14/10/2021 18:58:18
Subject: Fw: [hamlogger] v4.0.278 auto-update is on-line ...

Bob
 
The only thing not happening with the JTDX/DXSPOT mod, is the Logging window is not populated with the Call sign etc, after clicking on the DX SPOT.
 
73
 
Ian
G4GIR
 
----- Original Message -----
From: Ian <IAN.FRITH@...>
Sent: 14/10/2021 15:44:38
Subject: Re: [hamlogger] v4.0.278 auto-update is on-line ...

Cheers Bob,
Seems good.
 
73
 
    Ian G4GIR
 
----- Original Message -----
From: Bob <k4cy@...>
Sent: 14/10/2021 15:20:24
Subject: [hamlogger] v4.0.278 auto-update is on-line ...

This is primarily a maintenance release. Several small bugs are fixed.
Eelcraft K4 CAT support is added. It is essentially the same as the K3, but as users find differences between the two they will be added to the K4 support. The K4 CAT commands may use a embedded $ in the command. This interferes with the Logger32 practice of making macros like this $command MaryHadALittleLamb;$ now the K4 may have $command Mary$Had$A$Little$Lamb$;$. This won't work, so if your K4 macro includes embedded $, then replace them with chr(36) and your K4 macro becomes $command Marychr(36)Hadchr(36)Achr(36)Littlechr(36)Lambchr(36);$.
Also, in this version, if you are running JTDX with the JTDX control panel connected, you can click on FT4/8 DX Spots on different bands/modes and the JTDX control panel will QSY JTDX.
SeventyThree(s).