On 11/26/2022 3:31 PM Joseph LaFerla <joe@...> wrote:

I have recently experienced the following problem.  I am using cherry picking with JTDX. The JTDX Control Panel opens correctly but when I click on any of the bands nothing happens.  The cherry picker viewer shows that I clicked the Halt TX button instead with any of the band button presses.  I can change modes fine.  When I right click on any of the band buttons, a window opens up showing the correct band information for each button.

I have searched the venerable help file but could not find anything.  Anyone know what I am doing wrong?  Thanks in advance.

Joe VA3TV

On 11/26/2022 5:27 PM Joseph LaFerla <joe@...> wrote:

Yes, but it was before I had reinstalled Windows a long time ago.  But since the reinstallation of windows and loogger32 this has been the case.  I did not worry much about it until now.

On 2022/11/27 7:27:46, Joseph LaFerla <joe@...> wrote:

Yes, but it was before I had reinstalled Windows a long time ago.  But since the reinstallation of windows and loogger32 this has been the case.  I did not worry much about it until now.

On 11/26/2022 6:11 PM ja1nlx <ayoshida0205@...> wrote:

When JTDX start from UDP BandMap Start menu, you should see like this.

a. Text "JTDX control panel" is displayed like this.

b. and JTDX title bar show

c. then JTDX title bar change

This means that JTDX is now ready to be controlled by JTDX control panel (Band and Mode) 

Do you see "Logger32" in JTDX title bar ?

73 de aki

JA1NLX

On 2022/11/27 7:27:46, Joseph LaFerla <joe@...> wrote:

Yes, but it was before I had reinstalled Windows a long time ago.  But since the reinstallation of windows and loogger32 this has been the case.  I did not worry much about it until now.

On 2022/11/27 8:25:51, Bob <k4cy@...> wrote:

Aki, I suspect Logger32 is connecting to JTDX as expected. It was reported that mode change is working as expected,but not band change. There was reference to 'reinstalling', so it is possible that INI settings for all bands FT4/FT8 settings are lost. But, it was also mentioned that these settings have been checked. C'est la vie. SeventyThree(s).

On 11/26/2022 6:11 PM ja1nlx <ayoshida0205@...> wrote:

When JTDX start from UDP BandMap Start menu, you should see like this.

a. Text "JTDX control panel" is displayed like this.

b. and JTDX title bar show

c. then JTDX title bar change

This means that JTDX is now ready to be controlled by JTDX control panel (Band and Mode) 

Do you see "Logger32" in JTDX title bar ?

73 de aki

JA1NLX

On 2022/11/27 7:27:46, Joseph LaFerla <joe@...> wrote:

Yes, but it was before I had reinstalled Windows a long time ago.  But since the reinstallation of windows and loogger32 this has been the case.  I did not worry much about it until now.

On 2022/11/27 22:04:09, Joseph LaFerla <joe@...> wrote:

Hi all

Thanks for this.  I can report that the control panel does connect correctly to logger32, or at least the snippets you showed are what I see.  And perhaps, to be more correct, the Control Panel DOES "work" but is reporting wrong results in the event viewer but there is one result for each button press.  It's like the panel is getting the wrong data from somewhere.  I don't know if 'm confusing the issue. 

Joe

On 11/27/2022 8:04 AM Joseph LaFerla <joe@...> wrote:

Hi all

Thanks for this.  I can report that the control panel does connect correctly to logger32, or at least the snippets you showed are what I see.  And perhaps, to be more correct, the Control Panel DOES "work" but is reporting wrong results in the event viewer but there is one result for each button press.  It's like the panel is getting the wrong data from somewhere.  I don't know if 'm confusing the issue. 

Joe

On 11/27/2022 8:51 AM Joseph LaFerla <joe@...> wrote:

Hi Bob

Yes, to the three questions.  So the control panel seems to be starting correctly, in my view.

I may be out most of the day so may not be very quick with responses.

Joe

On 11/27/2022 9:06 AM Joseph LaFerla <joe@...> wrote:

Hi Aki

Yes I see that in all the bands.  The numbers are correct. for both bands.

Joe

On 11/27/2022 9:16 AM Joseph LaFerla <joe@...> wrote:

Yes when I change mode on the panel JTDX changes
No when I change band on the panel, JTDX does not change and the frequency readout does not change.
Yes when I change the band on JTDX the panel follows.

Joe

On 11/27/2022 11:56 AM Barry GM4GIF <gm4gif@...> wrote:

Hi Bob

Same just happed to me, tried to qsy to 17M using the button on the Control Panel, nothing. Screenshot attached.

 Mode changes OK (Control Panel to JTDX and vice versa).

Also if I change the rig manually JTDX and the Control Panel follow.

Cheers

Barry/gm4gif

On 11/27/2022 12:10 PM Barry GM4GIF <gm4gif@...> wrote:

Did that, no change. The Led turned a sort of orangey colour if that helps

73

Barry