Generic QSO Window


G4GIR
 

I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


Bob
 

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.

On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


G4GIR
 

Hello Bob
 
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
 
iAN
 

----- Original Message -----
From: Bob <k4cy@...>
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


Bob
 

OK, so tell me what you do see. 73.

On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
Hello Bob
 
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
 
iAN
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


g4girhb0 <ian.frith@...>
 

I see this on the one that don't Work and a good one :-
 
All Operators : QSOs with 3B8 [Mauritius Island] on 15m Mixed Mode. QSL and LOTW confirmations, All credits.

----- Original Message -----
From: Bob <k4cy@...>
Sent: 22/07/2021 16:30:51
Subject: Re: [hamlogger] Generic QSO Window

OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
Hello Bob
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
iAN
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


Bob
 

... and, is it just 15m/3B8 that returns no QSOs, or are there no QSOs regardless of the band/prefix? 73.

On 07/22/2021 11:40 AM g4girhb0 via groups.io <ian.frith@...> wrote:
 
 
I see this on the one that don't Work and a good one :-
 
All Operators : QSOs with 3B8 [Mauritius Island] on 15m Mixed Mode. QSL and LOTW confirmations, All credits.
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 16:30:51
Subject: Re: [hamlogger] Generic QSO Window

OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
Hello Bob
 
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
 
iAN
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


G4GIR
 

No it is any slot I check, tried it on a different award and still no QSO's
 

----- Original Message -----
From: Bob <k4cy@...>
Sent: 22/07/2021 16:46:15
Subject: Re: [hamlogger] Generic QSO Window

... and, is it just 15m/3B8 that returns no QSOs, or are there no QSOs regardless of the band/prefix? 73.
On 07/22/2021 11:40 AM g4girhb0 via groups.io <ian.frith@...> wrote:
I see this on the one that don't Work and a good one :-
All Operators : QSOs with 3B8 [Mauritius Island] on 15m Mixed Mode. QSL and LOTW confirmations, All credits.
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 16:30:51
Subject: Re: [hamlogger] Generic QSO Window

OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
Hello Bob
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
iAN
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


Bob
 

I have no idea. Maybe someone else has the answer. Good luck. 73.

On 07/22/2021 11:48 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
No it is any slot I check, tried it on a different award and still no QSO's
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 16:46:15
Subject: Re: [hamlogger] Generic QSO Window

... and, is it just 15m/3B8 that returns no QSOs, or are there no QSOs regardless of the band/prefix? 73.
On 07/22/2021 11:40 AM g4girhb0 via groups.io <ian.frith@...> wrote:
 
 
I see this on the one that don't Work and a good one :-
 
All Operators : QSOs with 3B8 [Mauritius Island] on 15m Mixed Mode. QSL and LOTW confirmations, All credits.
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 16:30:51
Subject: Re: [hamlogger] Generic QSO Window

OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
Hello Bob
 
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
 
iAN
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


g4girhb0 <ian.frith@...>
 

Cheers Bob
 
73
 

----- Original Message -----
From: Bob <k4cy@...>
Sent: 22/07/2021 16:55:31
Subject: Re: [hamlogger] Generic QSO Window

I have no idea. Maybe someone else has the answer. Good luck. 73.
On 07/22/2021 11:48 AM G4GIR via groups.io <i.frith@...> wrote:
No it is any slot I check, tried it on a different award and still no QSO's
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 16:46:15
Subject: Re: [hamlogger] Generic QSO Window

... and, is it just 15m/3B8 that returns no QSOs, or are there no QSOs regardless of the band/prefix? 73.
On 07/22/2021 11:40 AM g4girhb0 via groups.io <ian.frith@...> wrote:
I see this on the one that don't Work and a good one :-
All Operators : QSOs with 3B8 [Mauritius Island] on 15m Mixed Mode. QSL and LOTW confirmations, All credits.
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 16:30:51
Subject: Re: [hamlogger] Generic QSO Window

OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
Hello Bob
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
iAN
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


Bill Engel
 

Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


Bob
 

You might try recalc of your stats. 73.

On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
 
 
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


G4GIR
 

Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
 
73 Ian
 

----- Original Message -----
From: Bob <k4cy@...>
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window

You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


Bob
 

... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).

On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
 
 
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
 
73 Ian
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window

You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
 
 
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


John Munton - G7SSE
 

Ian, a long shot;

I believe each configuration will have its own Band Mode Table.

Compare the table for the rogue config with the other working ones and look for any anomalies / variations.


--
73, John - G7SSE


G4GIR
 

Not quite as long as I thought it would take 23 minutes. But still misbehaving.
 
Will try that after  what John has suggested re Bands/Mode Table. Last time I did a re-build It all went haywire lol.
 
73
 
Ian
 

----- Original Message -----
From: Bob <k4cy@...>
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window

... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
73 Ian
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window

You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


G4GIR
 

Well John I thought you had cracked it, the Band/Mode map in the rouge config was full of N's in the Stats column but when looking at the other config's Band/Mode Map they were the same, I changed all the N's to Y's in the Rogue config but stll no Q's showing up in the Generic Window. I am sure I f I create a new config from Scratch things will be Ok I have one similar to the rogue config but need to add the correct Radio, JTDX, Colours etc etc.!!!!
 
Would be nice to sort it in the current config though.
73
 
Ian
 

----- Original Message -----
From: G4GIR via groups.io <i.frith@...>
Sent: 23/07/2021 19:35:38
Subject: Re: [hamlogger] Generic QSO Window

Not quite as long as I thought it would take 23 minutes. But still misbehaving.
 
Will try that after  what John has suggested re Bands/Mode Table. Last time I did a re-build It all went haywire lol.
 
73
 
Ian
 
----- Original Message -----
From: Bob <k4cy@...>
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window

... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
73 Ian
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window

You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


Gary Hinson <Gary@...>
 

The DXCC award report works as expected for me e.g.

 

 

If your award reports are empty or incomplete, the usual cure is to recalculate statistics which (I believe) completely clears the statistics tables already in the database, then works systematically through every QSO in your logbook (specifically, the logbook that is currently open in Logger32 – which may vary with other configurations), rebuilding the stats tables from scratch.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bill Engel
Sent: 24 July 2021 02:03
To: hamlogger@groups.io
Subject: Re: [hamlogger] Generic QSO Window

 

Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


g4girhb0 <ian.frith@...>
 

I just did the re-calc see my earlier Post, it didn't make any difference. Yes it works for me in all my other configs !!
 
 
73
 
Ian
 

----- Original Message -----
From: Gary Hinson <Gary@...>
Sent: 23/07/2021 20:00:00
Subject: Re: [hamlogger] Generic QSO Window

The DXCC award report works as expected for me e.g.

 

 

If your award reports are empty or incomplete, the usual cure is to recalculate statistics which (I believe) completely clears the statistics tables already in the database, then works systematically through every QSO in your logbook (specifically, the logbook that is currently open in Logger32 – which may vary with other configurations), rebuilding the stats tables from scratch.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bill Engel
Sent: 24 July 2021 02:03
To: hamlogger@groups.io
Subject: Re: [hamlogger] Generic QSO Window

 

Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


G4GIR
 

Hello again all,
 
I have narrowed the problem down to 3 Awards, DXCC, DXCC Challenge and IOTA, all other Award windows work OK in the rogue GENERIC QSO WINDOW, i.e QSO's are shown in the GENERIC QSO WINDOW after clicking on a slot in the Award window.
 
I will try the re-build Bob next.
 
TNX
73
 
Ian
 

----- Original Message -----
From: Gary Hinson <Gary@...>
Sent: 23/07/2021 20:00:00
Subject: Re: [hamlogger] Generic QSO Window

The DXCC award report works as expected for me e.g.

 

 

If your award reports are empty or incomplete, the usual cure is to recalculate statistics which (I believe) completely clears the statistics tables already in the database, then works systematically through every QSO in your logbook (specifically, the logbook that is currently open in Logger32 – which may vary with other configurations), rebuilding the stats tables from scratch.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bill Engel
Sent: 24 July 2021 02:03
To: hamlogger@groups.io
Subject: Re: [hamlogger] Generic QSO Window

 

Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


Bob
 

I received this message at 13:00 local time. Then I received a message at 13:06 referring you having done a recalc and it made no difference ... Unless it takes 6 minutes or less for you to do a recalc, you haven done a recalc since you modified/fixed you BandPlan. Time to recalc. SeventyThree(s).

On 07/23/2021 2:59 PM G4GIR via groups.io <i.frith@...> wrote:
 
 
Well John I thought you had cracked it, the Band/Mode map in the rouge config was full of N's in the Stats column but when looking at the other config's Band/Mode Map they were the same, I changed all the N's to Y's in the Rogue config but stll no Q's showing up in the Generic Window. I am sure I f I create a new config from Scratch things will be Ok I have one similar to the rogue config but need to add the correct Radio, JTDX, Colours etc etc.!!!!
 
Would be nice to sort it in the current config though.
73
 
Ian
 
----- Original Message -----
From: G4GIR via groups.io < i.frith@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 19:35:38
Subject: Re: [hamlogger] Generic QSO Window

Not quite as long as I thought it would take 23 minutes. But still misbehaving.
 
Will try that after  what John has suggested re Bands/Mode Table. Last time I did a re-build It all went haywire lol.
 
73
 
Ian
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window

... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
 
 
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
 
73 Ian
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window

You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
 
 
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY