|
That's exactly what I saw after reverting to 265, Gary.
Unfortunately not with 266. Even after a restart of the PC ist showed all calls as being new.
But well, since noone else seems to see this it must be something on my end.
Will try agn with 267 :-)
73, Andy, DF4WC
|
|
|
Hi Andy. I wonder if this is a consequence of the UDP BandMap only being updated periodically? The recalculate statistics function starts by erasing all the current statistics, hence every spot is ‘a new one’ at that point and they are all highlighted. Then Logger32 works its way systematically through the log, rebuilding the statistics as it goes. Spots on the regular band maps are checked and the highlighting is adjusted during the process but the UDP BandMap is (I think) only checked and updated when the next batch of UDP messages arrives from JTDX|WSJT-X: if no new batch of decodes arrives, the UDP BandMap remains as it was, fully highlighted. At least, that’s my understanding. I guess once the stats are fully recalc’d, you can clear the UDP BandMap and wait for it to re-fill when new UDP messages arrive with new FT8 decodes. I think they will be correctly highlighted. 73 Gary ZL2iFB
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Andreas Rehberg
Sent: 15 June 2021 17:41
To: hamlogger@groups.io
Subject: Re: [hamlogger] v4.0.266 auto-update is on-line ... ..after recalc of the stats all stations in the wsjt-x bandmap are marked as being new here..
back to 265 all good agn
73, Andy, DF4WC
|
|
|
..after recalc of the stats all stations in the wsjt-x bandmap are marked as being new here..
back to 265 all good agn
73, Andy, DF4WC
|
|
|
Hi Bob recalculate statistics works ok thank you. Can you make the distance coloumn sortable please? 73
|
|
|
Rick Williams - VE7TK
I have it resolved and all is well. There was a debate over who had control of the SteppIR COMPORT!
As we agreed - pilot error at this end. Thanks for the help.
73, Rick
VE7TK
|
|
|
Rick, the wedge code for theSteppIR is identical. If the appropriate Bi and 180 LEDs light upon the VUC, and you have the checkbox checked to shoe VUC Bi/180 (which you do), then I see no reason the wedge is not showing as expected. 73.
On 06/13/2021 3:04 PM Rick Williams - VE7TK via groups.io <ve7tk@...> wrote:
'It' is the same picture you see on page 629. This is the picture I anticipated. Unfortunately my display is still uni-directional. A reboot of Win10 did not solve the issue.
Typically this type of issue is pilot error on my part. I will await other Steppir/Ultrabeam users advice.
73, Rick
|
|
|
Rick Williams - VE7TK
'It' is the same picture you see on page 629. This is the picture I anticipated. Unfortunately my display is still uni-directional. A reboot of Win10 did not solve the issue.
Typically this type of issue is pilot error on my part. I will await other Steppir/Ultrabeam users advice.
73, Rick
|
|
|
... and what 'it' might that be Rick? SeventyThree(s).
On 06/13/2021 2:00 PM Rick Williams - VE7TK via groups.io <ve7tk@...> wrote:
I see it also .... sigh!
73, Rick
|
|
|
Rick Williams - VE7TK
I see it also .... sigh!
73, Rick
|
|
|
Someone else will have to answer this. I have no ultrabeam. But, on page 629 of the Help file I see a pretty picture of a SteppIR in Bi mode.
SeventyThree(s).
On 06/13/2021 1:04 PM Rick Williams - VE7TK via groups.io <ve7tk@...> wrote:
Thanks for the addition Bob. This will be very useful. However, I can't seem to get the "Enable Ultrabeam/Steppir/Bi/180 wedge" working? I am expecting a 2nd wedge to appear centred at 290? Am I missing something?
73, Rick
VE7TK
|
|
|
Rick Williams - VE7TK
Thanks for the addition Bob. This will be very useful. However, I can't seem to get the "Enable Ultrabeam/Steppir/Bi/180 wedge" working? I am expecting a 2nd wedge to appear centred at 290? Am I missing something?  73, Rick VE7TK
|
|
|
It's working. It seems that the
little window got hidden somehow.
73
Jan
PA4JJ
Op 13-6-2021 om 16:46 schreef Bob:
To open the
Digital direction Window, Right click on the tracking window
just to the right of the VIEW DX tab. Click SHOW DIGITAL
HEADING. Just like it's been since day one. SeventyThree(s).
All fine Bob but IMHO the question was that we could
not find where to open or how to display the digital
direction window.
I once had this window active but now I cannot find how to
open it again.
73
Jan
Op 13-6-2021 om 15:19 schreef Bob:
Correct.
It resets the glass and borderless properties. To close
the digital direction window, right click on it and click
EXIT. Now you will find the SHOW DIGITAL DIRECTION menu UN
checked. SeventyThree(s).
It stays checked here
73
Jan
PA4JJ
Op 13-6-2021 om 14:51 schreef
Bob:
Right
click on the tracking window (just to the right of the
VIEW DX tab). UNcheck the SHOW DIGITAL HEADING. This
will close the digital heading window., turns off the
glass and borderless options, and reopens the digital
heading window. SeventyThree(s).
OK so I also had a hard time finding this but once I did
being the curious sort of fellow that I am...I checked
both the Glass & Borderless form along with the Set
Form on Top and now my digital indicator window is gone.
How do I get it back??
Jim K2QB
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
|
|
Make sure you are showing a band and mode in the log entry window that has a rotor setup for it in the band/mode tables.
73 from uck-radio, w4uck
jim
|
|
|
Prasad, using PSTRotorAz you have no need for the digital direction window. Major rewrite to makr the digital direction standalone. 73.
On 06/13/2021 10:57 AM Prasad <vu2ptt@...> wrote:
Bob,
I noticed this neat Digital Direction feature for the first time today. It works fine with the internal rotator control with a COM port specified but does not work with the External Interface rotator type. I use PSTRotatorAz most of the time with other contesting software.
Would it be possible to show the rotator heading somewhere on the entry window or status bar - so we can see it without actually opening the tracking window? :)
On Sun, Jun 13, 2021 at 8:16 PM Bob <
k4cy@...> wrote:
To open the Digital direction Window, Right click on the tracking window just to the right of the VIEW DX tab. Click SHOW DIGITAL HEADING. Just like it's been since day one. SeventyThree(s).
All fine Bob but IMHO the question was that we could not find where to open or how to display the digital direction window.
I once had this window active but now I cannot find how to open it again.
73
Jan
Op 13-6-2021 om 15:19 schreef Bob:
Correct. It resets the glass and borderless properties. To close the digital direction window, right click on it and click EXIT. Now you will find the SHOW DIGITAL DIRECTION menu UN checked. SeventyThree(s).
It stays checked here
73
Jan
PA4JJ
Op 13-6-2021 om 14:51 schreef Bob:
Right click on the tracking window (just to the right of the VIEW DX tab). UNcheck the SHOW DIGITAL HEADING. This will close the digital heading window., turns off the glass and borderless options, and reopens the digital heading window. SeventyThree(s).
OK so I also had a hard time finding this but once I did being the curious sort of fellow that I am...I checked both the Glass & Borderless form along with the Set Form on Top and now my digital indicator window is gone. How do I get it back??
Jim K2QB
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
|
|
Bob,
I noticed this neat Digital Direction feature for the first time today. It works fine with the internal rotator control with a COM port specified but does not work with the External Interface rotator type. I use PSTRotatorAz most of the time with other contesting software.
Would it be possible to show the rotator heading somewhere on the entry window or status bar - so we can see it without actually opening the tracking window? :)
On Sun, Jun 13, 2021 at 8:16 PM Bob < k4cy@...> wrote:
To open the Digital direction Window, Right click on the tracking window just to the right of the VIEW DX tab. Click SHOW DIGITAL HEADING. Just like it's been since day one. SeventyThree(s).
All fine Bob but IMHO the question was that we could not find where to open or how to display the digital direction window.
I once had this window active but now I cannot find how to open it again.
73
Jan
Op 13-6-2021 om 15:19 schreef Bob:
Correct. It resets the glass and borderless properties. To close the digital direction window, right click on it and click EXIT. Now you will find the SHOW DIGITAL DIRECTION menu UN checked. SeventyThree(s).
It stays checked here
73
Jan
PA4JJ
Op 13-6-2021 om 14:51 schreef Bob:
Right click on the tracking window (just to the right of the VIEW DX tab). UNcheck the SHOW DIGITAL HEADING. This will close the digital heading window., turns off the glass and borderless options, and reopens the digital heading window. SeventyThree(s).
OK so I also had a hard time finding this but once I did being the curious sort of fellow that I am...I checked both the Glass & Borderless form along with the Set Form on Top and now my digital indicator window is gone. How do I get it back??
Jim K2QB
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
|
|
To open the Digital direction Window, Right click on the tracking window just to the right of the VIEW DX tab. Click SHOW DIGITAL HEADING. Just like it's been since day one. SeventyThree(s).
On 06/13/2021 10:36 AM Jan <hamlogger@...> wrote:
All fine Bob but IMHO the question was that we could not find where to open or how to display the digital direction window.
I once had this window active but now I cannot find how to open it again.
73
Jan
Op 13-6-2021 om 15:19 schreef Bob:
Correct. It resets the glass and borderless properties. To close the digital direction window, right click on it and click EXIT. Now you will find the SHOW DIGITAL DIRECTION menu UN checked. SeventyThree(s).
It stays checked here
73
Jan
PA4JJ
Op 13-6-2021 om 14:51 schreef Bob:
Right click on the tracking window (just to the right of the VIEW DX tab). UNcheck the SHOW DIGITAL HEADING. This will close the digital heading window., turns off the glass and borderless options, and reopens the digital heading window. SeventyThree(s).
OK so I also had a hard time finding this but once I did being the curious sort of fellow that I am...I checked both the Glass & Borderless form along with the Set Form on Top and now my digital indicator window is gone. How do I get it back??
Jim K2QB
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
|
|
All fine Bob but IMHO the
question was that we could not find where to open or how to
display the digital direction window.
I once had this window active but now I cannot find how to open
it again.
73
Jan
Op 13-6-2021 om 15:19 schreef Bob:
Correct. It
resets the glass and borderless properties. To close
the digital direction window, right click on it and click
EXIT. Now you will find the SHOW DIGITAL DIRECTION menu UN
checked. SeventyThree(s).
It stays checked here
73
Jan
PA4JJ
Op 13-6-2021 om 14:51 schreef Bob:
Right
click on the tracking window (just to the right of the
VIEW DX tab). UNcheck the SHOW DIGITAL HEADING. This will
close the digital heading window., turns off the glass and
borderless options, and reopens the digital heading
window. SeventyThree(s).
OK so I also had a hard time finding this but once I did
being the curious sort of fellow that I am...I checked both
the Glass & Borderless form along with the Set Form on
Top and now my digital indicator window is gone. How do I
get it back??
Jim K2QB
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
|
|
Correct. It resets the glass and borderless properties. To close the digital direction window, right click on it and click EXIT. Now you will find the SHOW DIGITAL DIRECTION menu UN checked. SeventyThree(s).
On 06/13/2021 9:02 AM Jan <hamlogger@...> wrote:
It stays checked here
73
Jan
PA4JJ
Op 13-6-2021 om 14:51 schreef Bob:
Right click on the tracking window (just to the right of the VIEW DX tab). UNcheck the SHOW DIGITAL HEADING. This will close the digital heading window., turns off the glass and borderless options, and reopens the digital heading window. SeventyThree(s).
OK so I also had a hard time finding this but once I did being the curious sort of fellow that I am...I checked both the Glass & Borderless form along with the Set Form on Top and now my digital indicator window is gone. How do I get it back??
Jim K2QB
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
|
|
It stays checked here
73
Jan
PA4JJ
Op 13-6-2021 om 14:51 schreef Bob:
Right click
on the tracking window (just to the right of the VIEW DX tab).
UNcheck the SHOW DIGITAL HEADING. This will close the digital
heading window., turns off the glass and borderless options,
and reopens the digital heading window. SeventyThree(s).
OK so I also had a hard time finding this but once I did being
the curious sort of fellow that I am...I checked both the Glass
& Borderless form along with the Set Form on Top and now my
digital indicator window is gone. How do I get it back??
Jim K2QB
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
|
|
Right click on the tracking window (just to the right of the VIEW DX tab). UNcheck the SHOW DIGITAL HEADING. This will close the digital heading window., turns off the glass and borderless options, and reopens the digital heading window. SeventyThree(s).
On 06/13/2021 8:36 AM Jim K2QB <nfjimc@...> wrote:
OK so I also had a hard time finding this but once I did being the curious sort of fellow that I am...I checked both the Glass & Borderless form along with the Set Form on Top and now my digital indicator window is gone. How do I get it back??
Jim K2QB
|
|
|
