Power Setting in an IC 756 Pro11


Ian Morrison
 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 


Bob
 

There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:
 
 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 


Dave Colliau
 

Shouldnt this be 14 02 then the data ?
Dave N8DC

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:
 
 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 


Bob
 

Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s).

On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:
 
 
There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).
On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:
 
 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 


n5kd
 

On a IC7300 this sets 24w

$hexcommand FE FE 94 E0 14 0A 00 62 FD$

 

And this sets 95w

$hexcommand FE FE 94 E0 14 0A 02 44 FD$ 95 WATTS

 

The 94 is the ID for a 7300. Change that to 64 for your rig.

 

73’ Pete, N5KD.

 

From: Bob
Sent: Tuesday, March 2, 2021 4:01 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s).

On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:

 

 

There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:

 

 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 

 


Dave Colliau
 

Oops. I missed the 0A was looking at 02 and yup the numerals have to be 00 62 or whatever you want for power .
Dave N8DC

On 03/02/2021 11:37 AM n5kd <n5kd@...> wrote:
 
 

On a IC7300 this sets 24w

$hexcommand FE FE 94 E0 14 0A 00 62 FD$

 

And this sets 95w

$hexcommand FE FE 94 E0 14 0A 02 44 FD$ 95 WATTS

 

The 94 is the ID for a 7300. Change that to 64 for your rig.

 

73’ Pete, N5KD.

 

From: Bob
Sent: Tuesday, March 2, 2021 4:01 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s).

On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:

 

 

There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:

 

 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 

 

 


Ian Morrison
 

Nice try guys, but no go.

 

Here are the results I get.

$hexcommand FE FE 64 E0 14 0A 00 50 FD$ set the output to 10 w

$hexcommand FE FE 64 E0 14 0A 00 99 FD$ sets the output to 25 w

Any number larger than 99 and the command id ignored. Even if I try FF for 255 as the book proclaims as full power.

Hmmmm………………

Strange

Ian

 

 

 

 

Sent from Mail for Windows 10

 

From: Dave Colliau
Sent: Tuesday, March 2, 2021 12:03 PM
To: hamlogger@groups.io; n5kd
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Oops. I missed the 0A was looking at 02 and yup the numerals have to be 00 62 or whatever you want for power .

Dave N8DC

On 03/02/2021 11:37 AM n5kd <n5kd@...> wrote:

 

 

On a IC7300 this sets 24w

$hexcommand FE FE 94 E0 14 0A 00 62 FD$

 

And this sets 95w

$hexcommand FE FE 94 E0 14 0A 02 44 FD$ 95 WATTS

 

The 94 is the ID for a 7300. Change that to 64 for your rig.

 

73’ Pete, N5KD.

 

From: Bob
Sent: Tuesday, March 2, 2021 4:01 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s).

On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:

 

 

There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:

 

 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 

 

 

 


n5kd
 

Why don’t you try changing the 00 to 01 and experiment.

I think that’s the next higher power denomination.

73’ Pete, N5KD.

On Mar 2, 2021, at 11:29, Ian Morrison <imorrison@...> wrote:



Nice try guys, but no go.

 

Here are the results I get.

$hexcommand FE FE 64 E0 14 0A 00 50 FD$ set the output to 10 w

$hexcommand FE FE 64 E0 14 0A 00 99 FD$ sets the output to 25 w

Any number larger than 99 and the command id ignored. Even if I try FF for 255 as the book proclaims as full power.

Hmmmm………………

Strange

Ian

 

 

 

 

Sent from Mail for Windows 10

 

From: Dave Colliau
Sent: Tuesday, March 2, 2021 12:03 PM
To: hamlogger@groups.io; n5kd
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Oops. I missed the 0A was looking at 02 and yup the numerals have to be 00 62 or whatever you want for power .

Dave N8DC

On 03/02/2021 11:37 AM n5kd <n5kd@...> wrote:

 

 

On a IC7300 this sets 24w

$hexcommand FE FE 94 E0 14 0A 00 62 FD$

 

And this sets 95w

$hexcommand FE FE 94 E0 14 0A 02 44 FD$ 95 WATTS

 

The 94 is the ID for a 7300. Change that to 64 for your rig.

 

73’ Pete, N5KD.

<7BF7944E94F94507922E11A93B04325C[29095963].png>

 

From: Bob
Sent: Tuesday, March 2, 2021 4:01 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s).

On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:

 

 

There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:

 

 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 

 

 

 

<6F57852DBF1A4B08BF4CA3D7C00097E3.png>
<7BF7944E94F94507922E11A93B04325C[29095963].png>


Dave Colliau
 

Yes if i remember right its 0 to 250 but in 2x2 so 01 25 will be 125.
Dave N8DC

On 03/02/2021 12:42 PM n5kd <n5kd@...> wrote:
 
 
Why don’t you try changing the 00 to 01 and experiment.
 
I think that’s the next higher power denomination.
 
73’ Pete, N5KD.

On Mar 2, 2021, at 11:29, Ian Morrison <imorrison@...> wrote:

Nice try guys, but no go.

 

Here are the results I get.

$hexcommand FE FE 64 E0 14 0A 00 50 FD$ set the output to 10 w

$hexcommand FE FE 64 E0 14 0A 00 99 FD$ sets the output to 25 w

Any number larger than 99 and the command id ignored. Even if I try FF for 255 as the book proclaims as full power.

Hmmmm………………

Strange

Ian

 

 

 

 

Sent from Mail for Windows 10

 

From: Dave Colliau
Sent: Tuesday, March 2, 2021 12:03 PM
To: hamlogger@groups.io; n5kd
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Oops. I missed the 0A was looking at 02 and yup the numerals have to be 00 62 or whatever you want for power .

Dave N8DC

On 03/02/2021 11:37 AM n5kd <n5kd@...> wrote:

 

 

On a IC7300 this sets 24w

$hexcommand FE FE 94 E0 14 0A 00 62 FD$

 

And this sets 95w

$hexcommand FE FE 94 E0 14 0A 02 44 FD$ 95 WATTS

 

The 94 is the ID for a 7300. Change that to 64 for your rig.

 

73’ Pete, N5KD.

 

<7BF7944E94F94507922E11A93B04325C[29095963].png>

 

 

From: Bob
Sent: Tuesday, March 2, 2021 4:01 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s).

On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:

 

 

There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:

 

 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 

 

 

 

 

<6F57852DBF1A4B08BF4CA3D7C00097E3.png>
<7BF7944E94F94507922E11A93B04325C[29095963].png>


Ian Morrison
 

Sheesh!

I should read what I type, but the again……

The actual command string I am using is:

 

$HEXCOMMAND FE FE 64 E0 14 0A 50 FD$

 

With the last 2 digits after the 0A as the power

 

Ian

 

 

Sent from Mail for Windows 10

 

From: n5kd
Sent: Tuesday, March 2, 2021 12:42 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Why don’t you try changing the 00 to 01 and experiment.

 

I think that’s the next higher power denomination.

 

73’ Pete, N5KD.



On Mar 2, 2021, at 11:29, Ian Morrison <imorrison@...> wrote:



Nice try guys, but no go.

 

Here are the results I get.

$hexcommand FE FE 64 E0 14 0A 50 FD$ set the output to 10 w

$hexcommand FE FE 64 E0 14 0A 99 FD$ sets the output to 25 w

Any number larger than 99 and the command id ignored. Even if I try FF for 255 as the book proclaims as full power.

Hmmmm………………

Strange

Ian

 

 

 

 

Sent from Mail for Windows 10

 

From: Dave Colliau
Sent: Tuesday, March 2, 2021 12:03 PM
To: hamlogger@groups.io; n5kd
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Oops. I missed the 0A was looking at 02 and yup the numerals have to be 00 62 or whatever you want for power .

Dave N8DC

On 03/02/2021 11:37 AM n5kd <n5kd@...> wrote:

 

 

On a IC7300 this sets 24w

$hexcommand FE FE 94 E0 14 0A 00 62 FD$

 

And this sets 95w

$hexcommand FE FE 94 E0 14 0A 02 44 FD$ 95 WATTS

 

The 94 is the ID for a 7300. Change that to 64 for your rig.

 

73’ Pete, N5KD.

<7BF7944E94F94507922E11A93B04325C[29095963].png>

 

From: Bob
Sent: Tuesday, March 2, 2021 4:01 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s).

On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:

 

 

There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:

 

 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 

 

 

 

<6F57852DBF1A4B08BF4CA3D7C00097E3.png>

<7BF7944E94F94507922E11A93B04325C[29095963].png>

 


n5kd
 

Ian,

Humor me, and see if this sets the power to 95w.   Just copy & paste.

$hexcommand FE FE 64 E0 14 0A 02 44 FD$

73’ Pete, N5KD.


On Mar 2, 2021, at 17:53, Ian Morrison <imorrison@...> wrote:

Sheesh!
I should read what I type, but the again……
The actual command string I am using is:
 
$HEXCOMMAND FE FE 64 E0 14 0A 50 FD$
 
With the last 2 digits after the 0A as the power
 
Ian
 
 
Sent from Mail for Windows 10
 
From: n5kd
Sent: Tuesday, March 2, 2021 12:42 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11
 
Why don’t you try changing the 00 to 01 and experiment.
 
I think that’s the next higher power denomination.
 
73’ Pete, N5KD.


On Mar 2, 2021, at 11:29, Ian Morrison <imorrison@...> wrote:


Nice try guys, but no go.
 
Here are the results I get.
$hexcommand FE FE 64 E0 14 0A 50 FD$ set the output to 10 w
$hexcommand FE FE 64 E0 14 0A 99 FD$ sets the output to 25 w 
Any number larger than 99 and the command id ignored. Even if I try FF for 255 as the book proclaims as full power.
Hmmmm………………
Strange
Ian
 
 
 
 
Sent from Mail for Windows 10
 
From: Dave Colliau
Sent: Tuesday, March 2, 2021 12:03 PM
To: hamlogger@groups.io; n5kd
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11
 
Oops. I missed the 0A was looking at 02 and yup the numerals have to be 00 62 or whatever you want for power . 
Dave N8DC 
On 03/02/2021 11:37 AM n5kd <n5kd@...> wrote: 
  
  
On a IC7300 this sets 24w
$hexcommand FE FE 94 E0 14 0A 00 62 FD$
 
And this sets 95w
$hexcommand FE FE 94 E0 14 0A 02 44 FD$ 95 WATTS
 
The 94 is the ID for a 7300. Change that to 64 for your rig.
 
73’ Pete, N5KD.
<7BF7944E94F94507922E11A93B04325C[29095963].png>
 
From: Bob
Sent: Tuesday, March 2, 2021 4:01 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11
 
Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s). 
On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:
 
 
There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s). 
On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:
 
 
Hi all,
Does any know why using the following command in the RCP to set the power doesn’t work?
$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$
Entering and 3 digit number causes the command not to work, 2 digit do change the power setting
The manual says “ [RF POWER] setting (0=mini, to 255=max)
 
Thanks, Ian
VE3EP
 
Sent from Mail for Windows 10
 
From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock
 
I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I
Am I missing something here?
 
73,
VE3EP
 
Sent from Mail for Windows 10
 
From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock
 
Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.
Have the right time in the radio clock is not only to know the current time.
We have PC, mobile phone and why not, also a clock on the wall.
 
 
73s
Fabio, IZ8MBW
 
 
 
On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote: 
 
 
Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long . 
  
73 
Dave N8DC 
On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote: 
  
  
In fact, I have executed it also on my Windows PC and works. 
  
73s 
Fabio, IZ8MBW 
  
  
  
On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote: 
  
  
This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0. 

73 de LA9XKA - Per 

On 01.03.2021 13:41, Fabio IZ8MBW via groups.iowrote: 
I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP). 
On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync
  
 
 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync
  
  
  
  
73s 
Fabio, IZ8MBW 
  
  
 
 
Virusfri. www.avg.com
  
 
 
 
 
 
 
<6F57852DBF1A4B08BF4CA3D7C00097E3.png>
<7BF7944E94F94507922E11A93B04325C[29095963].png>

 
<F4B3959FD5B34A6EACE9E30D2C7249FD.png>


Steve VE3RX
 

A single set of digits is NOT an option for power settings. While it may work by fluke in some cases, the 14 0A command must have 2 "sets" of digits after the command when setting power level.
So, 02 55 is full power, 01 27 will be 50%, 00 64 will be about 25%, 0032 will be about 12%, give or take some.
A command FE FE 64 E0 14 0A 01 99 FD is a valid command, saying set power to 199/255 of full scale. Values are read as "text" values, what you see is what you get.

73
Steve


Ian Morrison
 

You folks are far too clever.

Thanks Dave et al.

Adding 01 brings the power up to 80 watts.

 

73,

Ian

 

 

Sent from Mail for Windows 10

 

From: Dave Colliau
Sent: Tuesday, March 2, 2021 12:46 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Yes if i remember right its 0 to 250 but in 2x2 so 01 25 will be 125.

Dave N8DC

On 03/02/2021 12:42 PM n5kd <n5kd@...> wrote:

 

 

Why don’t you try changing the 00 to 01 and experiment.

 

I think that’s the next higher power denomination.

 

73’ Pete, N5KD.



On Mar 2, 2021, at 11:29, Ian Morrison <imorrison@...> wrote:

Nice try guys, but no go.

 

Here are the results I get.

$hexcommand FE FE 64 E0 14 0A 00 50 FD$ set the output to 10 w

$hexcommand FE FE 64 E0 14 0A 00 99 FD$ sets the output to 25 w

Any number larger than 99 and the command id ignored. Even if I try FF for 255 as the book proclaims as full power.

Hmmmm………………

Strange

Ian

 

 

 

 

Sent from Mail for Windows 10

 

From: Dave Colliau
Sent: Tuesday, March 2, 2021 12:03 PM
To: hamlogger@groups.io; n5kd
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Oops. I missed the 0A was looking at 02 and yup the numerals have to be 00 62 or whatever you want for power .

Dave N8DC

On 03/02/2021 11:37 AM n5kd <n5kd@...> wrote:

 

 

On a IC7300 this sets 24w

$hexcommand FE FE 94 E0 14 0A 00 62 FD$

 

And this sets 95w

$hexcommand FE FE 94 E0 14 0A 02 44 FD$ 95 WATTS

 

The 94 is the ID for a 7300. Change that to 64 for your rig.

 

73’ Pete, N5KD.

 

<7BF7944E94F94507922E11A93B04325C[29095963].png>

 

 

From: Bob
Sent: Tuesday, March 2, 2021 4:01 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Power Setting in an IC 756 Pro11

 

Did I really say there's no 9 in hex? I don't know the correct command structure for your Icom, but the 99 you've entered is 153 decimal which is 0.6 of full output (or something like that). SeventyThree(s).

On 03/02/2021 10:09 AM Bob <k4cy@...> wrote:

 

 

There is no 9 in hex. 0 to 255 decimal = 00 to FF in hex maybe?  So half power is 80 hex (or something like that). SeventyThree(s).

On 03/02/2021 9:58 AM Ian Morrison <imorrison@...> wrote:

 

 

Hi all,

Does any know why using the following command in the RCP to set the power doesn’t work?

$HEXCOMMAND FE FE 64 E0 14 0A 99  FD$

Entering and 3 digit number causes the command not to work, 2 digit do change the power setting

The manual says “ [RF POWER] setting (0=mini, to 255=max)

 

Thanks, Ian

VE3EP

 

Sent from Mail for Windows 10

 

From: Ian Morrison
Sent: Tuesday, March 2, 2021 9:25 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

I’m confused. Why is this a logger problem? I have an IC PRO11. I just noticed the clock on the display. It  tracks with my WWV clock, no connection. I

Am I missing something here?

 

73,

VE3EP

 

Sent from Mail for Windows 10

 

From: Fabio IZ8MBW via groups.io
Sent: Monday, March 1, 2021 11:07 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Suggestion: Synchronize Radio Clock

 

Dave, modern Radio can, for example, do RTTY "inside" the radio and log the QSO "inside" the radio.

Have the right time in the radio clock is not only to know the current time.

We have PC, mobile phone and why not, also a clock on the wall.

 

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 04:38:51 PM GMT+1, Dave Colliau <n8dc-8@...> wrote:

 

 

Never could figure out the actual need for a clock in the rig. If your using Logger and you have a time sync program and your using the floating clock in logger why would you even worry about the clock in the 7300. The clock in the rig does nothing !.  I see these posts all the time. People are having a fit that the new 101's dont have a clock . Big deal. My logging program ( logger 32 ) takes care of this for me . I also have a clock on the wall and my cell phone is pretty damn close to the right time all day long .

 

73

Dave N8DC

On 03/01/2021 10:19 AM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

In fact, I have executed it also on my Windows PC and works.

 

73s

Fabio, IZ8MBW

 

 

 

On Monday, March 1, 2021, 03:11:17 PM GMT+1, Per <pmolund@...> wrote:

 

 

This script is not Linux specific, it is written in Python which is also supported under Windows. You just have to change the script to use Windows serial port, ex. COM1: instead of /dev/ttyUSB0.

73 de LA9XKA - Per

On 01.03.2021 13:41, Fabio IZ8MBW via groups.io wrote:

I also have an Icom IC-7300 and it will nice if Logger32 can update the clock on the radio via CAT (after updating the PC clock via NTP).

On the Web I found this, but it's for Linux:  loughkb/IC-7300-time-sync

 

 

 

loughkb/IC-7300-time-sync

Python3 script to sync the radio's clock with your computer via CAT commands - loughkb/IC-7300-time-sync

 

 

 

 

73s

Fabio, IZ8MBW

 

 

 

 

Virusfri. www.avg.com

 

 

 

 

 

 

 

 

<6F57852DBF1A4B08BF4CA3D7C00097E3.png>

<7BF7944E94F94507922E11A93B04325C[29095963].png>